The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Solid-solution strengthening in refractory high entropy alloys
Open accessAbstract
Abstract Compression stress-strain curves of a number of refractory high entropy alloys (RHEAs) were generated at temperatures ranging from room temperature to 1000 °C. It is shown that solid-solution strengthening in these alloys has both an athermal and a thermal component. Results from mechanical testing are combined with literature data to develop solid-solution strengthening models for both components that incorporate the particularities of single-phase body centered cubic (BCC) materials. The athermal component is affected by a combination of atomic size mismatch and elastic modulus mismatch, which depend upon average values from each alloy, thereby allowing this component to be estimated in a high-throughput fashion. On the other hand, the thermally-activated yield stress component does not correlate with any parameter that can be calculated by averaging pure elemental atomic properties and it is observed to be larger than the values found for pure BCC refractory metals and their dilute alloys. Overall, RHEAs are found to have larger thermal and athermal yield stress components compared to pure or conventional refractory alloys, which explains their relatively high strengths at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Takeuchi, A., & Inoue, A. (2005) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.46.2817 · Cited by 4,909
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
High-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lu, J., Liu, C. T., & Yang, Y. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,016
Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook
Simmons, G., & Wang, H. F. (1971) · Medical Entomology and Zoology · Cited by 2,644
Materials Properties Handbook: Titanium Alloys
Boyer, R. R., Welsch, G. E., & Collings, E. W. (1994) · Medical Entomology and Zoology · Cited by 2,637
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
GUO, S., & LIU, C. T. (2011) · Progress in Natural Science: Materials International · doi:10.1016/s1002-0071(12)60080-x · Cited by 2,534
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
Hull, D., & Bacon, D. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70217-6 · Cited by 1,501
(2001) · Elsevier eBooks · doi:10.1016/b978-0-7506-4681-9.x5000-7 · Cited by 1,417
Laplanche, G., Kostka, A., Reinhart, C., Hunfeld, J., Eggeler, G., & George, E. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.036 · Cited by 1,379
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
Cordero, Z. C., Knight, B. E., & Schuh, C. A. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1191808 · Cited by 1,209
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
Laplanche, G., Kostka, A., Horst, O. M., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.038 · Cited by 1,198
Overview No. 104 The physical and mechanical properties of NiAl
Miracle, D. B. (1993) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(93)90001-9 · Cited by 1,066
Otto, F., Dlouhý, A., Pradeep, K. G., Kuběnová, M., Raabe, D., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.005 · Cited by 932
Strengthening Mechanisms in Crystal Plasticity
Argon, A. (2007) · Oxford University Press eBooks · doi:10.1093/acprof:oso/9780198516002.001.0001 · Cited by 920
Theory of strengthening in fcc high entropy alloys
Varvenne, C., Luque, A., & Curtin, W. A. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.040 · Cited by 908
Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys
Senkov, O. N., Senkova, S. V., & Woodward, C. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.029 · Cited by 857
(1932) · Nature · doi:10.1038/129717b0 · Cited by 830
Temperature Dependence of the Elastic Constants
Varshni, Y. P. (1970) · Physical Review B · doi:10.1103/physrevb.2.3952 · Cited by 792
Senkov, O. N., Senkova, S. V., Woodward, C., & Miracle, D. B. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.032 · Cited by 674
Elastic constants of cubic crystals
Jamal, M., Jalali Asadabadi, S., Ahmad, I., & Rahnamaye Aliabad, H. A. (2014) · Computational Materials Science · doi:10.1016/j.commatsci.2014.08.027 · Cited by 648
Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys
Juan, C.-C., Tsai, M.-H., Tsai, C.-W., Lin, C.-M., Wang, W.-R., Yang, C.-C., Chen, S.-K., Lin, S.-J., & Yeh, J.-W. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.03.013 · Cited by 633
Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy
Zou, Y., Maiti, S., Steurer, W., & Spolenak, R. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.11.049 · Cited by 541
Mechanical properties of refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Hawk, J. A., Zhou, H. F., Chen, M. W., & Gao, M. C. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.188 · Cited by 528
Han, Z. D., Chen, N., Zhao, S. F., Fan, L. W., Yang, G. N., Shao, Y., & Yao, K. F. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.01.007 · Cited by 528
Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.015 · Cited by 508
The plastic deformation of metals
(1969) · Non-Destructive Testing · doi:10.1016/0029-1021(69)90092-9 · Cited by 490
Solute strengthening in random alloys
Varvenne, C., Leyson, G. P. M., Ghazisaeidi, M., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.046 · Cited by 427
Li, B., Bian, K., Lane, J. M. D., Salerno, K. M., Grest, G. S., Ao, T., Hickman, R., Wise, J., Wang, Z., & Fan, H. (2017) · Nature Communications · doi:10.1038/ncomms15574 · Cited by 371
Maiti, S., & Steurer, W. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.018 · Cited by 331
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
Tracy, C. L., Park, S., Rittman, D. R., Zinkle, S. J., Bei, H., Lang, M., Ewing, R. C., & Mao, W. L. (2017) · Nature Communications · doi:10.1038/ncomms15634 · Cited by 329
On the room temperature deformation mechanisms of a TiZrHfNbTa refractory high-entropy alloy
Couzinié, J.-P., Lilensten, L., Champion, Y., Dirras, G., Perrière, L., & Guillot, I. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.08.024 · Cited by 284
Rao, S. I., Varvenne, C., Woodward, C., Parthasarathy, T. A., Miracle, D., Senkov, O. N., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.011 · Cited by 236
A lightweight single-phase AlTiVCr compositionally complex alloy
Qiu, Y., Hu, Y. J., Taylor, A., Styles, M. J., Marceau, R. K. W., Ceguerra, A. V., Gibson, M. A., Liu, Z. K., Fraser, H. L., & Birbilis, N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.10.037 · Cited by 226
Design of Refractory High-Entropy Alloys
Gao, M. C., Carney, C. S., Doğan, Ö. N., Jablonksi, P. D., Hawk, J. A., & Alman, D. E. (2015) · JOM · doi:10.1007/s11837-015-1617-z · Cited by 201
Laplanche, G., Bonneville, J., Varvenne, C., Curtin, W. A., & George, E. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.014 · Cited by 199
Recent advances in aerospace refractory metal alloys
Wadsworth, J., Nieh, T. G., & Stephens, J. J. (1988) · International Materials Reviews · doi:10.1179/imr.1988.33.1.131 · Cited by 179
Dirras, G., Couque, H., Lilensten, L., Heczel, A., Tingaud, D., Couzinié, J.-P., Perrière, L., Gubicza, J., & Guillot, I. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.11.018 · Cited by 171
Flow stress of commercially pure niobium over a broad range of temperatures and strain rates
Nemat‐Nasser, S., & Guo, W. (2000) · Materials Science and Engineering A · doi:10.1016/s0921-5093(00)00740-1 · Cited by 143
High-Throughput Solid Solution Strengthening Characterization in High Entropy AlloysPreprint
Coury, F. G., Wilson, P., Clarke, K. D., Kaufman, M. J., & Clarke, A. J. (2018) · SSRN Electronic Journal · doi:10.2139/ssrn.3301208 · Cited by 122
Self-citationHigh Throughput Discovery and Design of Strong Multicomponent Metallic Solid Solutions
Coury, F. G., Clarke, K. D., Kiminami, C. S., Kaufman, M. J., & Clarke, A. J. (2018) · Scientific Reports · doi:10.1038/s41598-018-26830-6 · Cited by 99
Self-citationStrengthening mechanism of aluminum on elastic properties of NbVTiZr high-entropy alloys
Qiu, S. Y., Miao, N., Zhou, J., Guo, Z., & Sun, Z. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.09.003 · Cited by 62
Ab-initio calculations for the structural properties of Zr-Nb alloys
Харченко, & Kharchenko, D. O. (2013) · Condensed Matter Physics · doi:10.5488/cmp.16.13801 · Cited by 36
Ulitchny, M. G., & Gíbala, R. (1973) · Journal of the Less Common Metals · doi:10.1016/0022-5088(73)90061-1 · Cited by 36
The solid state portion of the Hf-Ta phase diagram
Krug, M. P., Oden, L. L., & Romans, P. A. (1975) · Metallurgical Transactions A · doi:10.1007/bf02661352 · Cited by 15
Matschat, R., & Czerwensky, M. (1997) · physica status solidi (a) · doi:10.1002/1521-396x(199704)160:2<329::aid-pssa329>3.0.co;2-o · Cited by 11
The solid state portion of the Hf-Ta phase diagram
Krug, M. P., Oden, L. L., & Romans, P. A. (1975) · Metallurgical and Materials Transactions A · doi:10.1007/bf02645523 · Cited by 3
Cited by
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.015 · Cited by 508
Mechanically alloyed high entropy alloys: existing challenges and opportunities
Kumar, A., Singh, A., & Suhane, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.01.141 · Cited by 294
Strength can be controlled by edge dislocations in refractory high-entropy alloys
Lee, C., Maresca, F., Feng, R., Chou, Y., Ungar, T., Widom, M., An, K., Poplawsky, J. D., Chou, Y.-C., Liaw, P. K., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25807-w · Cited by 262
Modeling solid solution strengthening in high entropy alloys using machine learning
Wen, C., Wang, C., Zhang, Y., Antonov, S., Xue, D., Lookman, T., & Su, Y. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.116917 · Cited by 254
Metadata
- Authors
- Coury, F. G., Kaufman, M., & Clarke, A. J.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 175
- Pages
- 66-81
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2950425307
- Cited by
- 290
- References
- 51
- FWCI
- 13.12
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.