The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy
Open accessAbstract
Additive manufacturing (AM) promises to revolutionize manufacturing by producing complex parts with tailored mechanical properties through local microstructure control. The main challenge is to control or prevent columnar (elongated) growth morphology which is prevalent in AM parts. Here, we elucidate mechanisms of microstructure control that promote favorable equiaxed grains (aspect ratio close to 1) using a laser beam shaping strategy. This requires an accurate thermal profile that is only captured using advanced predictive simulation that couples full laser ray tracing, ultra-fast hydrodynamic melt flow and the cellular automata method for grain growth. We investigate columnar to equiaxed microstructure transition during single-track laser powder bed fusion processing of 316 L stainless steel using Gaussian (circular) and elliptical (transverse and longitudinal) laser beam shapes. We demonstrate that the propensity to produce equiaxed grains through nucleation events correlates with large beam width as delivered by an elliptical transverse laser beam. In addition, we reveal different microstructure evolution mechanisms during transient states such as at start and end of a scan track when the laser is respectively turned on and off. Columnar growth is hard to prevent at the start of a track and the growth morphology in the absence of heat input is dictated by the melt pool width and depth achieved and the degree of thermal undercooling. We expect this fundamental understanding of the physics of local beam shaping for microstructural control would have implications on future complex beam shape designs as well as beam modulation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Self-citationAdditively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Self-citationMetal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Steady state columnar and equiaxed growth of dendrites and eutectic
Hunt, J. D. (1984) · Materials Science and Engineering · doi:10.1016/0025-5416(84)90201-5 · Cited by 1,470
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Self-citationDREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
Groeber, M. A., & Jackson, M. A. (2014) · Integrating Materials and Manufacturing Innovation · doi:10.1186/2193-9772-3-5 · Cited by 1,125
Xu, W., Lui, E. W., Pateras, A., Qian, M., & Brandt, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.027 · Cited by 687
Raghavan, N., Dehoff, R., Pannala, S., Simunovic, S., Kirka, M., Turner, J., Carlson, N., & Babu, S. S. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.063 · Cited by 573
Dehoff, R. R., Kirka, M. M., Sames, W. J., Bilheux, H., Tremsin, A. S., Lowe, L. E., & Babu, S. S. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000734 · Cited by 555
Scientific, technological and economic issues in metal printing and their solutions
DebRoy, T., Mukherjee, T., Milewski, J. O., Elmer, J. W., Ribic, B., Blecher, J. J., & Zhang, W. (2019) · Nature Materials · doi:10.1038/s41563-019-0408-2 · Cited by 543
Modeling of additive manufacturing processes for metals: Challenges and opportunities
Francois, M. M., Sun, A., King, W. E., Henson, N. J., Tourret, D., Bronkhorst, C. A., Carlson, N. N., Newman, C. K., Haut, T., Bakosi, J., et al. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.001 · Cited by 462
Self-citationMicrostructural Control of Additively Manufactured Metallic Materials
Collins, P. C., Brice, D. A., Samimi, P., Ghamarian, I., & Fraser, H. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031816 · Cited by 461
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J. (2017) · JOM · doi:10.1007/s11837-017-2265-2 · Cited by 422
Campbell, I., Diegel, O., Kowen, J., & Wohlers, T. T. (2018) · ResearchSpace (University of Auckland) · Cited by 377
Gandin, C. A., Desbiolles, J. L., Rappaz, M., & Thevoz, P. (1999) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-999-0226-2 · Cited by 360
Ye, J., Khairallah, S. A., Rubenchik, A. M., Crumb, M. F., Guss, G. M., Belak, J. F., & Matthews, M. J. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900185 · Cited by 259
Self-citationThree-dimensional modeling of grain structure evolution during welding of an aluminum alloy
Wei, H., Elmer, J. W., & DebRoy, T. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.073 · Cited by 204
3D multi-layer grain structure simulation of powder bed fusion additive manufacturing
Koepf, J. A., Gotterbarm, M. R., Markl, M., & Körner, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.04.030 · Cited by 188
Tailoring the grain structure of IN718 during selective electron beam melting
Körner, C., Helmer, H., Bauereiß, A., & Singer, R. F. (2014) · MATEC Web of Conferences · doi:10.1051/matecconf/20141408001 · Cited by 174
Li, X., & Tan, W. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.06.019 · Cited by 170
Tan, W., & Shin, Y. C. (2014) · Computational Materials Science · doi:10.1016/j.commatsci.2014.10.063 · Cited by 132
Cited by
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Voisin, T., Forien, J.-B., Perron, A., Aubry, S., Bertin, N., Samanta, A., Baker, A., & Wang, Y. M. (2021) · Acta Materialia · doi:10.1016/j.actamat.2020.11.018 · Cited by 623
Additive manufacturing of steels: a review of achievements and challenges
Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05109-0 · Cited by 622
“With the ability to build material through successive adding of layers with thicknesses of a few tens of microns on top of each other, AM is capable of producing site-specific microstructures with tailored mechanical [25, 26] and corrosion properties [27] that are difficult/impossible to achieve through traditional ma…”
BackgroundAbd-Elaziem, W., Elkatatny, S., Abd-Elaziem, A.-E., Khedr, M., Abd El-baky, M. A., Hassan, M. A., Abu-Okail, M., Mohammed, M., Järvenpää, A., Allam, T., et al. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.085 · Cited by 257
Metadata
- Authors
- Shi, R., Khairallah, S. A., Roehling, T. T., Heo, T. W., McKeown, J. T., & Matthews, M. J.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 184
- Pages
- 284-305
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2990054302
- Cited by
- 365
- References
- 23
- FWCI
- 17.59
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.