The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Vanadium is an optimal element for strengthening in both fcc and bcc high-entropy alloys
Open accessAbstract
Abstract The element Vanadium (V) appears unique among alloying elements for providing high strengthening in both the fcc Co-Cr-Fe-Mn-Ni-V and bcc Cr-Mo-Nb-Ta-V-W-Hf-Ti-Zr high-entropy alloy families. The origin of Vanadium’s special role is its atomic volume: large in the fcc alloys and small in the bcc alloys, and thus having a large misfit volume in both crystalline structures. A parameter-free theory applicable to both fcc and bcc HEAs rationalizes this finding, with predictions of strength across a range of fcc and bcc alloys in quantitative and qualitative agreement with experiments. In the fcc class, the analysis demonstrates why the newly-discovered NiCoV and Ni0.632V0.368 alloys have far higher strength than any other fcc alloy and are predicted to be the highest attainable. In the bcc class, the analysis demonstrates that the addition of V always increases the strength relative to the same alloys without V. The optimization of complex alloys for high strength should thus center around the inclusion of V as a primary element at concentration levels of around 25 at.%
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook
Simmons, G., & Wang, H. F. (1971) · Medical Entomology and Zoology · Cited by 2,644
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Cited by
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Self-citationAdditive manufacturing of high entropy alloys: A practical review
Ostovari Moghaddam, A., Shaburova, N. A., Samodurova, M. N., Abdollahzadeh, A., & Trofimov, E. A. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.11.029 · Cited by 474
Chen, S., Aitken, Z. H., Pattamatta, S., Wu, Z., Yu, Z. G., Srolovitz, D. J., Liaw, P. K., & Zhang, Y.-W. (2021) · Nature Communications · doi:10.1038/s41467-021-25264-5 · Cited by 392
Yield strength and misfit volumes of NiCoCr and implications for short-range-order
Yin, B., Yoshida, S., Tsuji, N., & Curtin, W. A. (2020) · Nature Communications · doi:10.1038/s41467-020-16083-1 · Cited by 311
Self-citationModeling solid solution strengthening in high entropy alloys using machine learning
Wen, C., Wang, C., Zhang, Y., Antonov, S., Xue, D., Lookman, T., & Su, Y. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.116917 · Cited by 254
Metadata
- Authors
- Yin, B., Maresca, F., & Curtin, W. A.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 188
- Pages
- 486-491
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W3004483368
- Cited by
- 338
- References
- 26
- FWCI
- 18.24
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Vanadium is an optimal element for strengthening in both fcc and bcc high-entropy alloys. https://app.cochat.ai/papers/10.1016/j.actamat.2020.01.062
- The paper
- Yin, B., Maresca, F., & Curtin, W. A. (2020). Vanadium is an optimal element for strengthening in both fcc and bcc high-entropy alloys. Acta Materialia. https://doi.org/10.1016/j.actamat.2020.01.062
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.