The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High cycle fatigue in selective laser melted Ti-6Al-4V
Abstract
A major drawback of additively manufactured metallic components is their poor high cycle fatigue (HCF) resistance, which is primarily due to the presence of porosity in them. Keeping this in view, the effect of process parameters such as laser power (w), layer thickness (t), and scan rotation (ϕ) on pore size, shape and distribution in selectively laser melted (SLM) Ti-6Al-4V alloy specimens and the influence of such pore characteristics on the HCF life under rotating bending fatigue conditions were investigated in this work. X-ray tomography was used to characterize the porosity in coupons produced using four different w-t-ϕ combinations. The possibility of enhancing the fatigue strength (σf) of the as-fabricated alloy through microstructural modification, via a post-fabrication heat-treatment that substantially improves the threshold for fatigue crack initiation, and subsequent shot peening were explored. Results show that the pore sizes and distribution are sensitive to the process parameters utilized; pores align in the build direction for ϕ = 90° whereas they are randomly distributed for ϕ = 67°, and a higher t results in denser parts. These observations are rationalized by recourse to the combined effect of the Marangoni convection and the Rayleigh instability in adjoining melt-pools. Only a marginal improvement in σf upon heat treatment was noted, whereas shot peening enhances it substantially such that σf is up to 55% of the tensile strength. These results are analyzed using the fracture mechanics-based K-T (Kitagawa-Takahashi) approach that is based on the El-Haddad formula.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cited by
Fracture and fatigue in additively manufactured metals
Becker, T. H., Kumar, P., & Ramamurty, U. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117240 · Cited by 377
Self-citationKan, W. H., Chiu, L. N. S., Lim, C. V. S., Zhu, Y., Tian, Y., Jiang, D., & Huang, A. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06990-7 · Cited by 309
Wang, S., Ning, J., Zhu, L., Yang, Z., Yan, W., Dun, Y., Xue, P., Xu, P., Bose, S., & Bandyopadhyay, A. (2022) · Materials Today · doi:10.1016/j.mattod.2022.08.014 · Cited by 279
Metadata
- Authors
- Kumar, P., & Ramamurty, U.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 194
- Pages
- 305-320
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W3028373266
- Cited by
- 188
- References
- 1
- FWCI
- 12.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High cycle fatigue in selective laser melted Ti-6Al-4V. https://app.cochat.ai/papers/10.1016/j.actamat.2020.05.041
- The paper
- Kumar, P., & Ramamurty, U. (2020). High cycle fatigue in selective laser melted Ti-6Al-4V. Acta Materialia. https://doi.org/10.1016/j.actamat.2020.05.041
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.