The DOI matches its Crossref record; 143 of the 143 references it cites were found in a registry or an index.
A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion
Open accessAbstract
Laser powder bed fusion (LPBF) is an emerging additive manufacturing technique that is currently adopted by a number of industries for its ability to directly fabricate complex near-net-shaped components with minimal material wastage. Two major limitations of LPBF, however, are that the process inherently produces components containing some amount of porosity and that fabricated components tend to suffer from poor repeatability. While recent advances have allowed the porosity level to be reduced to a minimum, consistent porosity-free fabrication remains elusive. Therefore, it is important to understand how porosity affects mechanical properties in alloys fabricated this way in order to inform the safe design and application of components. To this aim, this article will review recent literature on the effects of porosity on tensile properties, fatigue life, impact and fracture toughness, creep response, and wear behavior. As the number of alloys that can be fabricated by this technology continues to grow, this overview will mainly focus on four alloys that are commonly fabricated by LPBF—Ti-6Al-4 V, Inconel 718, AISI 316L, and AlSi10Mg.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Read, N., Wang, W., Essa, K., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.044 · Cited by 1,218
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
Amato, K. N., Gaytan, S. M., Murr, L. E., Martinez, E., Shindo, P. W., Hernandez, J., Collins, S., & Medina, F. (2012) · Acta Materialia · doi:10.1016/j.actamat.2011.12.032 · Cited by 1,166
Sanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
Metadata
- Authors
- Kan, W. H., Chiu, L. N. S., Lim, C. V. S., Zhu, Y., Tian, Y., Jiang, D., & Huang, A.
- Venue
- Journal of Materials Science
- Published
- 2022-03-11
- Volume
- 57
- Issue
- 21
- Pages
- 9818-9865
- ISSN
- 0022-2461 (ISSN-L)
- 1573-4803
- OpenAlex
- W4221091034
- Cited by
- 309
- References
- 143
- FWCI
- 18.11
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion. https://app.cochat.ai/papers/10.1007/s10853-022-06990-7
- The paper
- Kan, W. H., Chiu, L. N. S., Lim, C. V. S., Zhu, Y., Tian, Y., Jiang, D., & Huang, A. (2022). A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion. Journal of Materials Science. https://doi.org/10.1007/s10853-022-06990-7
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.