The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy
Open accessAbstract
Additive manufacturing offers an exclusive way of anisotropic microstructure control with a high degree of freedom regarding variation in process parameters. This study demonstrates a unique texture formation in Inconel 718 (IN718) using a bidirectional laser scan in a laser powder bed fusion (LPBF) process for tailoring the mechanical properties. We developed three distinctive textures in IN718 using LPBF: a single-crystal-like microstructure (SCM) with a <110> orientation in the build direction (BD), crystallographic lamellar microstructure (CLM) with a <110>-oriented main layer and <100>-oriented sub-layer in the BD, and polycrystalline with a weak orientation. The microstructure observations and finite element simulations showed that the texture evolution of the SCM and CLM was dominated by the melt-pool shape and related heat-flow direction. The specimen with CLM exhibited a simultaneous improvement in strength and ductility owing to the stress-transfer coefficient between the <110>-oriented main and <100>-oriented sub-grains, showing superior mechanical properties compared to cast-IN718. This behavior is largely attributed to the presence of the boundary between the main and sub-layers (crystallographic grain boundary) lying parallel to the BD uniquely formed under the LPBF process. Furthermore, the strength–ductility balance of the part with the CLM can be controlled by changing the stress-transfer coefficient and the Schmidt factor through an alteration of the loading axis. Control of the crystallographic texture, including the CLM formation, is beneficial for tailoring and improving the mechanical performance of the structural materials, which can be a promising methodology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
Amato, K. N., Gaytan, S. M., Murr, L. E., Martinez, E., Shindo, P. W., Hernandez, J., Collins, S., & Medina, F. (2012) · Acta Materialia · doi:10.1016/j.actamat.2011.12.032 · Cited by 1,166
Single-crystal laser deposition of superalloys: processing–microstructure maps
Gäumann, M., Bezençon, C., Canalis, P., & Kurz, W. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00367-0 · Cited by 1,091
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Cherry, J. A., Davies, H. M., Mehmood, S., Lavery, N. P., Brown, S. G. R., & Sienz, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6297-2 · Cited by 755
Carter, L. N., Martin, C., Withers, P. J., & Attallah, M. M. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.06.172 · Cited by 751
Parry, L., Ashcroft, I. A., & Wildman, R. D. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.014 · Cited by 739
Selective laser melting of stainless steel 316L with low porosity and high build rates
Sun, Z., Tan, X., Tor, S. B., & Yeong, W. Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.035 · Cited by 714
Sun, Z., Tan, X., Tor, S. B., & Chua, C. K. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0018-5 · Cited by 627
Qi, H., Azer, M. N., & Ritter, A. M. (2009) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-009-9949-3 · Cited by 618
Yadollahi, A., Shamsaei, N., Thompson, S. M., Elwany, A., & Bian, L. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.03.014 · Cited by 609
Popovich, V., Borisov, E. V., Popovich, A., Sufiiarov, V. S., Masaylo, D. V., & Alzina, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.10.075 · Cited by 580
Raghavan, N., Dehoff, R., Pannala, S., Simunovic, S., Kirka, M., Turner, J., Carlson, N., & Babu, S. S. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.063 · Cited by 573
Evolution of solidification texture during additive manufacturing
Wei, H. L., Mazumder, J., & DebRoy, T. (2015) · Scientific Reports · doi:10.1038/srep16446 · Cited by 557
Ishimoto, T., Hagihara, K., Hisamoto, K., Sun, S., & Nakano, T. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.12.038 · Cited by 446
Self-citationSun, S.-H., Ishimoto, T., Hagihara, K., Tsutsumi, Y., Hanawa, T., & Nakano, T. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.09.017 · Cited by 441
Self-citationSun, S.-H., Hagihara, K., & Nakano, T. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.060 · Cited by 364
Self-citationMetallurgy of high-silicon steel parts produced using Selective Laser Melting
Garibaldi, M., Ashcroft, I., Simonelli, M., & Hague, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.037 · Cited by 358
Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture
Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.06.061 · Cited by 280
Todai, M., Nakano, T., Liu, T., Yasuda, H. Y., Hagihara, K., Cho, K., Ueda, M., & Takeyama, M. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.11.001 · Cited by 255
Self-citationRashid, R., Masood, S. H., Ruan, D., Palanisamy, S., Rahman Rashid, R. A., & Brandt, M. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.06.023 · Cited by 240
Effects of processing parameters on consolidation and microstructure of W–Cu components by DMLS
Gu, D., & Shen, Y. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.05.065 · Cited by 224
Ghorbanpour, S., Alam, M. E., Ferreri, N. C., Kumar, A., McWilliams, B., Vogel, S. C., Bicknell, J., Beyerlein, I. J., & Knežević, M. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2019.09.002 · Cited by 224
Bontha, S., Klingbeil, N. W., Kobryn, P. A., & Fraser, H. L. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.02.019 · Cited by 198
Srivatsan, T. S., & Sudarshan, T. S. (2015) · CRC Press eBooks · doi:10.1201/b19360 · Cited by 151
Nagase, T., Hori, T., Todai, M., Sun, S., & Nakano, T. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107771 · Cited by 146
Self-citationKöhnen, P., Létang, M., Voshage, M., Schleifenbaum, J. H., & Haase, C. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100914 · Cited by 125
Gokcekaya, O., Hayashi, N., Ishimoto, T., Ueda, K., Narushima, T., & Nakano, T. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101624 · Cited by 97
Self-citationSuccessful additive manufacturing of MoSi2 including crystallographic texture and shape control
Hagihara, K., Nakano, T., Suzuki, M., Ishimoto, T., Suyalatu, & Sun, S. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.191 · Cited by 77
Self-citationCarluccio, D., Demir, A. G., Bermingham, M. J., & Dargusch, M. S. (2020) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-020-05796-z · Cited by 74
Andani, M. T., Lakshmanan, A., Sundararaghavan, V., Allison, J. E., & Misra, A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.08.079 · Cited by 74
Cited by
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Bareth, T., Eder, D., Lehmann, M., Schlick, G., & Seidel, C. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114010 · Cited by 4
Metadata
- Authors
- Gokcekaya, O., Ishimoto, T., Hibino, S., Yasutomi, J., Narushima, T., & Nakano, T.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 212
- Pages
- 116876
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W3155382531
- Cited by
- 459
- References
- 32
- FWCI
- 27.57
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.