The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
Assessing the corrosion of biodegradable magnesium implants: A critical review of current methodologies and their limitations
Open accessAbstract
Magnesium (Mg) and its alloys have been intensively studied as biodegradable implant materials, where their mechanical properties make them attractive candidates for orthopaedic applications. There are several commonly used in vitro tests, from simple mass loss experiments to more complex electrochemical methods, which provide information on the biocorrosion rates and mechanisms. The various methods each have their own unique benefits and limitations. Inappropriate test setup or interpretation of in vitro results creates the potential for flawed justification of subsequent in vivo experiments. It is therefore crucial to fully understand the correct usages of each experiment and the factors that need to be considered before drawing conclusions. This paper aims to elucidate the main benefits and limitations for each of the major in vitro methodologies that are used in examining the biodegradation behaviour of Mg and its alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modern Aspects of Electrochemistry
(2002) · Modern Aspects of Electrochemistry · doi:10.1007/b114168 · Cited by 5,949
Impedance Spectroscopy: Theory, Experiment, and Applications
(2005) · Wiley eBooks · doi:10.1002/0471716243 · Cited by 5,322
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Self-citationStern, M., & Geaby, A. L. (1957) · Journal of The Electrochemical Society · doi:10.1149/1.2428496 · Cited by 3,876
Impedance spectroscopy theory, experiment, and applications
(2005) · Choice Reviews Online · doi:10.5860/choice.43-0327 · Cited by 2,299
Understanding Magnesium Corrosion—A Framework for Improved Alloy Performance
Song, G., & Atrens, A. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310405 · Cited by 2,056
The history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860
Low-pressure solubility of gases in liquid water
Wilhelm, E., Battino, R., & Wilcock, R. J. (1977) · Chemical Reviews · doi:10.1021/cr60306a003 · Cited by 1,807
The development of binary Mg–Ca alloys for use as biodegradable materials within bone
Li, Z., Gu, X., Lou, S., & Zheng, Y. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.021 · Cited by 1,593
Control of biodegradation of biocompatable magnesium alloys
Song, G. (2007) · Corrosion Science · doi:10.1016/j.corsci.2007.01.001 · Cited by 1,514
In vitro and in vivo corrosion measurements of magnesium alloys
Witte, F., Fischer, J., Nellesen, J., Crostack, H.-A., Kaese, V., Pisch, A., Beckmann, F., & Windhagen, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.037 · Cited by 1,386
In vitro corrosion and biocompatibility of binary magnesium alloys
Gu, X., Zheng, Y., Cheng, Y., Zhong, S., & Xi, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.021 · Cited by 1,343
Research on an Mg–Zn alloy as a degradable biomaterial
Zhang, S., Zhang, X., Zhao, C., Li, J., Song, Y., Xie, C., Tao, H., Zhang, Y., He, Y., Jiang, Y., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.028 · Cited by 1,336
Electrochemical Impedance Spectroscopy and its Applications
Lasia, A. (2005) · Modern Aspects of Electrochemistry · doi:10.1007/0-306-46916-2_2 · Cited by 1,214
(1994) · Synthesis and Reactivity in Inorganic and Metal-Organic Chemistry · doi:10.1080/00945719408001398 · Cited by 1,088
Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation
Shi, Z., Liu, M., & Atrens, A. (2010) · Corrosion Science · doi:10.1016/j.corsci.2009.10.016 · Cited by 1,029
MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants
Zberg, B., Uggowitzer, P. J., & Löffler, J. F. (2009) · Nature Materials · doi:10.1038/nmat2542 · Cited by 899
The anodic dissolution of magnesium in chloride and sulphate solutions
Song, G., Atrens, A., John, D. S., Wu, X., & Nairn, J. (1997) · Corrosion Science · doi:10.1016/s0010-938x(97)00090-5 · Cited by 890
Makar, G. L., & Kruger, J. (1993) · International Materials Reviews · doi:10.1179/095066093790326320 · Cited by 803
Progress and Challenge for Magnesium Alloys as Biomaterials
Zeng, R., Dietzel, W., Witte, F., Hort, N., & Blawert, C. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800035 · Cited by 680
Biodegradable magnesium–hydroxyapatite metal matrix composites
Witte, F., Feyerabend, F., Maier, P., Fischer, J., Störmer, M., Blawert, C., Dietzel, W., & Hort, N. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.12.027 · Cited by 642
The electrochemical corrosion of pure magnesium in 1 N NaCl
Song, G., Atrens, A., Stjohn, D., Nairn, J., & Li, Y. (1997) · Corrosion Science · doi:10.1016/s0010-938x(96)00172-2 · Cited by 614
Magnesium alloys as implant materials – Principles of property design for Mg–RE alloys☆
Hort, N., Huang, Y., Fechner, D., Störmer, M., Blawert, C., Witte, F., Vogt, C., Drücker, H., Willumeit‐Römer, R., & Kainer, K. U. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.010 · Cited by 608
Wong, H. M., Yeung, K. W. K., Lam, K. O., Tam, V., Chu, P. K., Luk, K. D. K., & Cheung, K. M. C. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.111 · Cited by 579
Kannan, M. B., & Raman, R. K. S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.02.003 · Cited by 545
Zhang, X., Jiang, Z. H., Yao, Z. P., Song, Y., & Wu, Z. D. (2008) · Corrosion Science · doi:10.1016/j.corsci.2008.12.005 · Cited by 521
Xu, L., Pan, F., Yu, G., Yang, L., Zhang, E., & Yang, K. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.001 · Cited by 505
Alvarez-Lopez, M., Pereda, M. D., del Valle, J. A., Fernandez-Lorenzo, M., García-Alonso, M. C., Ruano, O. A., & Escudero, M. L. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.04.041 · Cited by 492
A Possible Biodegradable Magnesium Implant Material
Song, G., & Song, S. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200600252 · Cited by 487
A survey of bio-corrosion rates of magnesium alloys
Kirkland, N. T., Lespagnol, J., Birbilis, N., & Staiger, M. P. (2010) · Corrosion Science · doi:10.1016/j.corsci.2009.09.033 · Cited by 482
Self-citationZhang, E., Yin, D., Xu, L., Yang, L., & Yang, K. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.08.024 · Cited by 480
An innovative specimen configuration for the study of Mg corrosion
Shi, Z., & Atrens, A. (2011) · Corrosion Science · doi:10.1016/j.corsci.2010.09.016 · Cited by 469
Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41
Zhao, M.-C., Liu, M., Song, G.-L., & Atrens, A. (2008) · Corrosion Science · doi:10.1016/j.corsci.2008.08.023 · Cited by 461
Li, L., Gao, J., & Wang, Y. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2004.01.004 · Cited by 441
Biodegradable behaviors of AZ31 magnesium alloy in simulated body fluid
Song, Y., Shan, D., Chen, R., Zhang, F., & Han, E.-H. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.08.026 · Cited by 394
Effect of inorganic salts, amino acids and proteins on the degradation of pure magnesium in vitro
Yamamoto, A., & Hiromoto, S. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.12.015 · Cited by 368
Vander's Human Physiology The Mechanisms of Body Function
Widmaier, E. P., Raff, H., & Strang, K. T. (2006) · Medical Entomology and Zoology · Cited by 366
Wang, H. X., Guan, S. K., Wang, X., Ren, C. X., & Wang, L. G. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.009 · Cited by 359
Modern Aspects of Electrochemistry
(2002) · Modern Aspects of Electrochemistry · doi:10.1007/b113773 · Cited by 319
In vitro degradation, hemolysis and MC3T3-E1 cell adhesion of biodegradable Mg–Zn alloy
Zhang, S., Li, J., Song, Y., Zhao, C., Zhang, X., Xie, C., Zhang, Y., Tao, H., He, Y., Jiang, Y., et al. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2009.03.001 · Cited by 318
Preparation and characterization of a new biomedical magnesium–calcium alloy
Wan, Y., Xiong, G., Luo, H., He, F., Huang, Y., & Zhou, X. (2008) · Materials & Design · doi:10.1016/j.matdes.2008.04.017 · Cited by 280
Effect of heat treatment on corrosion behaviour of magnesium alloy AZ91D in simulated body fluid
Zhou, W., Shen, T., & Aung, N. N. (2010) · Corrosion Science · doi:10.1016/j.corsci.2009.11.030 · Cited by 257
Biocorrosion behavior of magnesium alloy in different simulated fluids for biomedical application
Yang, L., & Zhang, E. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2009.01.014 · Cited by 250
Mueller, W.-D., Lucia Nascimento, M., & Lorenzo de Mele, M. F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.048 · Cited by 237
Kirkland, N. T., Birbilis, N., Walker, J., Woodfield, T., Dias, G. J., & Staiger, M. P. (2010) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31687 · Cited by 216
Self-citationShi, P., Ng, W. F., Wong, M. H., & Cheng, F. T. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.01.102 · Cited by 215
Impedance Spectroscopy: Theory, Experiment, and Applications, 2nd ed
Nahir, T. M. (2005) · Journal of the American Chemical Society · Cited by 215
High corrosion-resistance nanocrystalline Ni coating on AZ91D magnesium alloy
Gu, C., Lian, J., He, J., Jiang, Z., & Jiang, Q. (2005) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.07.001 · Cited by 205
Corrosion process of pure magnesium in simulated body fluid
Wang, Y., Wei, M., Gao, J., Hu, J., & Zhang, Y. (2008) · Materials Letters · doi:10.1016/j.matlet.2007.11.045 · Cited by 199
Fluoride treatment and in vitro corrosion behavior of an AZ31B magnesium alloy
Yan, T., Tan, L., Xiong, D., Liu, X., Zhang, B., & Yang, K. (2010) · Materials Science and Engineering: C · doi:10.1016/j.msec.2010.03.007 · Cited by 198
Influence of Ca on the corrosion properties of magnesium for biomaterials
Kim, W.-C., Kim, J.-G., Lee, J.-Y., & Seok, H.-K. (2008) · Materials Letters · doi:10.1016/j.matlet.2008.06.028 · Cited by 195
Preparation and properties of high purity Mg–Y biomaterials
Peng, Q., Huang, Y., Zhou, L., Hort, N., & Kainer, K. U. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.065 · Cited by 187
Preparation, mechanical properties and in vitro biodegradation of porous magnesium scaffolds
Zhuang, H., Han, Y., & Feng, A. (2008) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.04.001 · Cited by 185
Liu, C., Xin, Y., Tang, G., & Chu, P. K. (2007) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.12.020 · Cited by 176
Wen, Z., Wu, C., Dai, C., & Yang, F. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.08.147 · Cited by 168
Chun-Yan, Z., Zeng, R., Liu, C., & Jia-Cheng, G. (2010) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2010.04.038 · Cited by 159
In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy
Zheng, Y. F., Gu, X. N., Xi, Y. L., & Chai, D. L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.009 · Cited by 158
Rettig, R., & Virtanen, S. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31550 · Cited by 148
Biodegradable Mg corrosion and osteoblast cell culture studies
Yun, Y., Dong, Z., Yang, D., Schulz, M. J., Shanov, V. N., Yarmolenko, S. N., Xu, Z., Kumta, P. N., & Sfeir, C. S. (2009) · Materials Science and Engineering C · doi:10.1016/j.msec.2009.02.008 · Cited by 146
Müeller, W., de Mele, M. F. L., Nascimento, M. L., & Zeddies, M. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32106 · Cited by 144
Bone-like matrix formation on magnesium and magnesium alloys
Pietak, A. M., Mahoney, P., Dias, G. J., & Staiger, M. P. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3172-9 · Cited by 137
Self-citationCorrosion behavior of ZrN/Zr coated biomedical AZ91 magnesium alloy
Xin, Y., Liu, C., Huo, K., Tang, G., Tian, X., & Chu, P. K.-H. (2009) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2009.02.074 · Cited by 132
Gu, X., Zheng, Y., & Chen, L. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/6/065011 · Cited by 119
Müller, W. D., Nascimento, M. L., Zeddies, M., Córsico, M., Gassa, L. M., & de Mele, M. F. L. (2007) · Materials Research · doi:10.1590/s1516-14392007000100003 · Cited by 114
Wang, Y., Wei, M., & Gao, J. (2008) · Materials Science and Engineering C · doi:10.1016/j.msec.2008.09.051 · Cited by 101
Improvement of corrosion resistance of magnesium alloys by vapor deposition
Yamamoto, A., Watanabe, A., Sugahara, K., et al. (2001) · Scripta Materialia · doi:10.1016/s1359-6462(01)00662-5 · Cited by 90
Testing of General and Localized Corrosion of Magnesium Alloys: A Critical Review
GHALI, E. L., Dietzel, W., & Kainer, K. U. (2004) · Journal of Materials Engineering and Performance · doi:10.1361/10599490420665 · Cited by 77
Calcium phosphate coating on magnesium alloy for modification of degradation behavior
Cui, F., Yang, J., Jiao, Y., Yin, Q., Zhang, Y., & Lee, I.-S. (2008) · Frontiers of Materials Science in China · doi:10.1007/s11706-008-0024-6 · Cited by 70
Establishment of the redox potential of water saturated with hydrogen
Пискарев, И. М., Ushkanov, V. A., Аристова, Н. А., Pp, L., & Myslivets, T. S. (2010) · BIOPHYSICS · doi:10.1134/s0006350910010033 · Cited by 55
A STUDY OF MAGNESIUM WIRE AS AN ABSORBABLE SUTURE AND LIGATURE MATERIAL
SEELIG, M. G. (1924) · Archives of Surgery · doi:10.1001/archsurg.1924.01120050210011 · Cited by 53
Corrosion of Magnesium and Magnesium-Base Alloys
Shaw, B. A., & Wolfe, R. C. (2005) · ASM International eBooks · doi:10.31399/asm.hb.v13b.a0003820 · Cited by 26
Thermodynamics: Pourbaix Diagrams
Revie, R. W., & Uhlig, H. H. (2008) · doi:10.1002/9780470277270.ch4 · Cited by 9
Cited by
Fundamentals and advances in magnesium alloy corrosion
Esmaily, M., Svensson, J. E., Fajardo, S., Birbilis, N., Frankel, G. S., Virtanen, S., Arrabal, R., Thomas, S., & Johansson, L. G. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.011 · Cited by 2,073
Self-citationAgarwal, S., Curtin, J., Duffy, B., & Jaiswal, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.020 · Cited by 955
Review of Recent Developments in the Field of Magnesium Corrosion
Atrens, A., Song, G., Liu, M., Shi, Z., Cao, F., & Dargusch, M. S. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201400434 · Cited by 806
Metallic Biomaterials: Current Challenges and Opportunities
Prasad, K., Bazaka, O., Chua, M., Rochford, M., Fedrick, L., Spoor, J., Symes, R., Tieppo, M., Collins, C., Cao, A., et al. (2017) · Materials · doi:10.3390/ma10080884 · Cited by 662
King, A. D., Birbilis, N., & Scully, J. R. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.12.124 · Cited by 640
Self-citation
Metadata
- Authors
- Kirkland, N. T., Birbilis, N., & Staiger, M. P.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2012-03
- Volume
- 8
- Issue
- 3
- Pages
- 925-936
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2071538975
- Cited by
- 856
- References
- 72
- FWCI
- 17.65
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.