The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
High-resolution PLA-based composite scaffolds via 3-D printing technology
Open accessAbstract
Fabrication of new biodegradable scaffolds that guide and stimulate tissue regeneration is still a major issue in tissue engineering approaches. Scaffolds that possess adequate biodegradability, pore size, interconnectivity, bioactivity and mechanical properties in accordance with the injured tissue are required. This work aimed to develop and characterize three-dimensional (3-D) scaffolds that fulfill the aforementioned requirements. For this, a nozzle-based rapid prototyping system was used to combine polylactic acid and a bioactive CaP glass to fabricate 3-D biodegradable scaffolds with two patterns (orthogonal and displaced double layer). Scanning electron microscopy and micro-computer tomography showed that 3-D scaffolds had completely interconnected porosity, uniform distribution of the glass particles, and a controlled and repetitive architecture. Surface properties were also assessed, showing that the incorporation of glass particles increased both the roughness and the hydrophilicity of the scaffolds. Mechanical tests indicated that compression strength is dependent on the scaffold geometry and the presence of glass. Preliminary cell response was studied with primary mesenchymal stem cells (MSC) and revealed that CaP glass improved cell adhesion. Overall, the results showed the suitability of the technique/materials combination to develop 3-D porous scaffolds and their initial biocompatibility, both being valuable characteristics for tissue engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Hutmacher, D. W., Schantz, J. T., Lam, C. X. F., Tan, K. C., & Lim, T. C. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.24 · Cited by 1,007
Polymeric biomaterials for tissue and organ regeneration
Seal, B. (2001) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(01)00035-3 · Cited by 892
Rapid prototyping in tissue engineering: challenges and potential
Yeong, W.-Y., Chua, C.-K., Leong, K.-F., & Chandrasekaran, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.10.004 · Cited by 807
Taboas, J. M., Maddox, R. D., Krebsbach, P. H., & Hollister, S. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00276-4 · Cited by 691
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
Crystallization, structure and properties of plasticized poly(l-lactide)
Kulinski, Z., & Piorkowska, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.101 · Cited by 540
Moroni, L., de Wijn, J. R., & van Blitterswijk, C. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.023 · Cited by 534
Role of interconnections in porous bioceramics on bone recolonization in vitro and in vivo
LU, J. X., FLAUTRE, B., ANSELME, K., HARDOUIN, P., GALLUR, A., DESCAMPS, M., & THIERRY, B. (1999) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1008973120918 · Cited by 530
Shor, L., Güçeri, S., Wen, X., Gandhi, M., & Sun, W. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.018 · Cited by 494
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L., & Müller, R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 459
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition
Xiong, Z. (2002) · Scripta Materialia · doi:10.1016/s1359-6462(02)00071-4 · Cited by 307
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00609-8 · Cited by 238
Effect of polyethylene glycol on the liquid–liquid phase transition in aqueous protein solutions
Annunziata, O., Asherie, N., Lomakin, A., Pande, J., Ogun, O., & Benedek, G. B. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.212507199 · Cited by 209
Physicochemical Degradation of Titania‐Stabilized Soluble Phosphate Glasses for Medical Applications
Navarro, M., Ginebra, M., Clément, J., Salvador, M., Gloria, A., & Planell, J. A. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03474.x · Cited by 148
Self-citationAdditive manufacturing of wet-spun polymeric scaffolds for bone tissue engineering
Puppi, D., Mota, C., Gazzarri, M., Dinucci, D., Gloria, A., Myrzabekova, M., Ambrosio, L., & Chiellini, E. (2012) · Biomedical Microdevices · doi:10.1007/s10544-012-9677-0 · Cited by 131
Direct writing of chitosan scaffolds using a robotic system
Li, G., Feng, W., Hutmacher, D. W., Wong, Y. S., Loh, H. T., & Fuh, J. Y. H. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510589458 · Cited by 125
Cellular response to calcium phosphate glasses with controlled solubility
Navarro, M., Ginebra, M., & Planell, J. A. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.20014 · Cited by 114
Self-citationBiomaterials engineered for integration
Moroni, L., & Elisseeff, J. H. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70089-0 · Cited by 100
Aguirre, A., González, A., Navarro, M., Castaño, Ó., Planell, J. A., & Engel, E. (2012) · European Cells and Materials · doi:10.22203/ecm.v024a07 · Cited by 84
Self-citationA PLA/calcium phosphate degradable composite material for bone tissue engineering: an in vitro study
Charles-Harris, M., Koch, M. A., Navarro, M., Lacroix, D., Engel, E., & Planell, J. A. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3390-9 · Cited by 80
Self-citationOf the in vivo behavior of calcium phosphate cements and glasses as bone substitutes
Sanzana, E. S., Navarro, M., Maculé, F., Suso, S., Planell, J. A., & Ginebra, M. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.04.023 · Cited by 76
Self-citationCharles-Harris, M., del Valle, S., HENTGES, E., Bleuet, P., Lacroix, D., & Planell, J. A. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.06.029 · Cited by 72
Self-citationSurface characterization and cell response of a PLA/CaP glass biodegradable composite material
Navarro, M., Engel, E., Planell, J. A., Amaral, I. F., Barbosa, M. A., & Ginebra, M. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31546 · Cited by 56
Self-citation
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Normal Bone Anatomy and Physiology
Clarke, B. (2008) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.04151206 · Cited by 2,192
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Metadata
- Authors
- Serra, T., Planell, J. A., & Navarro, M.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2013-03
- Volume
- 9
- Issue
- 3
- Pages
- 5521-5530
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2065844243
- Cited by
- 479
- References
- 29
- FWCI
- 8.20
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.