The DOI matches its Crossref record.
Reducing the roughness of internal surface of an additive manufacturing produced 316 steel component by chempolishing and electropolishing
Open accessAbstract
Reducing the surface roughness of an additively manufactured (AM) component is one of the most critical factors in determining the suitability of an AM component. As produced surface roughness of an AM component is very high. This prohibits the direct utilization of AM components for the intended applications. For most of the engineering applications, surface roughness must be reduced significantly. Reducing surface roughness is exponentially more challenging for the internal surfaces of a component. This paper reports research in the area of post processing interior surfaces of an AM component. Electropolishing and chemical polishing (chempolishing) methods were applied to reduce the surface roughness of the internal surface. It was found that chempolishing was very effective in simultaneously reducing the internal and external surface roughness of steel AM components for any complicated AM shape and geometry. The electropolishing methodology employed was very effective in reducing the surface roughness of the internal or external surfaces as long as a counter electrode could be positioned in the proximity of the surface to be polished. However, electropolishing produced better performance on the outer surfaces as compared to chempolishing. This paper summarizes research efforts to tackle the critical issue of reducing the surface roughness of complex AM components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
Maleki, E., Bagherifard, S., Bandini, M., & Guagliano, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101619 · Cited by 528
Metallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
Zerbst, U., Bruno, G., Buffière, J.-Y., Wegener, T., Niendorf, T., Wu, T., Zhang, X., Kashaev, N., Meneghetti, G., Hrabe, N., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100786 · Cited by 263
Post-Process Treatments for Additive-Manufactured Metallic Structures: A Comprehensive Review
Ge, J., Pillay, S., & Ning, H. (2023) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-023-08051-9 · Cited by 157
Metadata
- Authors
- Tyagi, P., Goulet, T., Riso, C., Stephenson, R., Chuenprateep, N., Schlitzer, J., Benton, C., & Garcia-Moreno, F.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 25
- Pages
- 32-38
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2899784047
- Cited by
- 195
- References
- 0
- FWCI
- 7.51
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reducing the roughness of internal surface of an additive manufacturing produced 316 steel component by chempolishing and electropolishing. https://app.cochat.ai/papers/10.1016/j.addma.2018.11.001
- The paper
- Tyagi, P., Goulet, T., Riso, C., Stephenson, R., Chuenprateep, N., Schlitzer, J., Benton, C., & Garcia-Moreno, F. (2019). Reducing the roughness of internal surface of an additive manufacturing produced 316 steel component by chempolishing and electropolishing. Additive Manufacturing. https://doi.org/10.1016/j.addma.2018.11.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.