The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fatigue behavior of additive manufactured 316L stainless steel parts: Effects of layer orientation and surface roughness
Open accessAbstract
The effects of layer orientation and surface roughness on the mechanical properties and fatigue life of 316L stainless steel (SS) fabricated via a laser beam powder bed fusion (LB-PBF) additive manufacturing process were investigated. Quasi-static tensile and uniaxial fatigue tests were conducted on LB-PBF 316L SS specimens fabricated in vertical and diagonal directions in their as-built surface condition, as well as in horizontal, vertical, and diagonal directions where the surface had been machined to remove any effects of surface roughness. In the machined condition, horizontally built LB-PBF specimens possessed higher fatigue resistance, followed by vertically built specimens, while the lowest fatigue resistance was obtained for diagonal specimens. Similarly, in the as-built condition, vertical specimens demonstrated better fatigue resistance when compared to diagonal specimens. Furthermore, the detrimental effects of surface roughness on fatigue life of LB-PBF 316L SS specimens was not significant, which may be due to the presence of large internal defects in the specimens. Anisotropy of LB-PBF 316L SS specimens was attributed to the variation in layer orientation, affecting defects’ directionality with respect to the loading direction. These defect characteristics can significantly influence the stress concentration and, consequently, fatigue behavior of additive manufactured parts. Therefore, the elastic-plastic energy release rates, a fracture mechanics-based concept that incorporates size, location, and projected area of defects on the loading plane, were determined to correlate the fatigue data and acceptable results were achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J. (2017) · JOM · doi:10.1007/s11837-017-2265-2 · Cited by 422
Self-citation
Cited by
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Additive manufacturing of steels: a review of achievements and challenges
Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05109-0 · Cited by 622
“[94] Shrestha R, Simsiriwong J, Shamsaei N (2019) Fatigue behavior of additive manufactured 316L stainless steel”
BackgroundHeat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Self-citationAdditive manufacturing for energy: A review
Sun, C., Wang, Y., McMurtrey, M. D., Jerred, N. D., Liou, F., & Li, J. (2021) · Applied Energy · doi:10.1016/j.apenergy.2020.116041 · Cited by 405
Metadata
- Authors
- Shrestha, R., Simsiriwong, J., & Shamsaei, N.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 28
- Pages
- 23-38
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2938241692
- Cited by
- 227
- References
- 1
- FWCI
- 14.24
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fatigue behavior of additive manufactured 316L stainless steel parts: Effects of layer orientation and surface roughness. https://app.cochat.ai/papers/10.1016/j.addma.2019.04.011
- The paper
- Shrestha, R., Simsiriwong, J., & Shamsaei, N. (2019). Fatigue behavior of additive manufactured 316L stainless steel parts: Effects of layer orientation and surface roughness. Additive Manufacturing. https://doi.org/10.1016/j.addma.2019.04.011
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.