The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion
Abstract
Abstract Lattice structures can add value to high-performance components manufactured by laser powder bed fusion due to their high specific strength and stiffness. A further use of lattice structures is in thermo-mechanical applications, where the high surface area of the lattice may aid heat transfer. However, little characterisation of lattices under thermal loading is currently available in the literature. In this study, a custom-built test rig was used to characterise the thermal conduction for three triply periodic minimal surface lattice types, namely: gyroid, diamond and Schwarz primitives, with unit cell size and volume fraction being varied. Results show that thermal conductivity is primarily a function of the material properties and volume fraction of the sample. However, some effects of the geometry, such as surface area to volume ratio, can be used to explain slight differences in the measured conductivity. The Schwarz primitive unit cell consistently gave the highest conductivity, with diamond and gyroid unit cells being marginally lower. Larger cell sizes typically gave higher conductivity than smaller cells, which can be attributed to greater intra-cell convective heat transfer and better interface coupling with the testing apparatus. The experimental results are used to derive equations that allow samples with a specified thermal conductivity to be designed, thus demonstrating how a component may be manufactured with a custom thermal profile by varying the volume fraction of the lattice.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
Cited by
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
State-of-the-art in heat exchanger additive manufacturing
Kaur, I., & Singh, P. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121600 · Cited by 319
Metadata
- Authors
- Catchpole-Smith, S., Sélo, R. R. J., Davis, A. W., Ashcroft, I. A., Tuck, C. J., & Clare, A.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 30
- Pages
- 100846
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2971605186
- Cited by
- 234
- References
- 1
- FWCI
- 10.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion. https://app.cochat.ai/papers/10.1016/j.addma.2019.100846
- The paper
- Catchpole-Smith, S., Sélo, R. R. J., Davis, A. W., Ashcroft, I. A., Tuck, C. J., & Clare, A. (2019). Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion. Additive Manufacturing. https://doi.org/10.1016/j.addma.2019.100846
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.