The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Anomalous strengthening by supersaturated solid solutions of selectively laser melted Al–Si-based alloys
Open accessAbstract
Abstract To identify the dominant contributing factor in the anomalously high strength of Al–Si-based alloys fabricated by selective laser melting (SLM), microstructural characteristics of a SLM-built Al–10Si–0.3 Mg alloy (AlSi10Mg) and their changes upon annealing at elevated temperatures were investigated. The as-built AlSi10Mg alloy exhibits a peculiar microstructure comprising of a number of columnar α-Al (fcc) phase with concentrated Si in solution. Numerous nano-sized particles were observed within the α-Al matrix. At elevated temperatures, a number of Si phase (diamond structure) precipitates consumed the solute Si in the columnar α-Al phase, but the microstructure of the α-Al matrix changed slightly. After annealing at elevated temperatures, the tensile strength of the as-built AlSi10Mg alloy substantially decreased accompanied by a reduction in the strain hardening rate. The supersaturated solid solution of the α-Al phase containing numerous nano-sized particles enhanced the strain hardening, resulting in the anomalous strengthening of the SLM-built AlSi10Mg alloy. The microstructural features were formed due to rapid solidification at an extremely high cooling rate in the SLM process, which provides important insights into controlling the strength of Al–Si-based alloys fabricated by SLM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Thermal conductivity of metals and alloys
Klemens, P. G., & Williams, R. K. (1986) · International Metals Reviews · doi:10.1179/imtr.1986.31.1.197 · Cited by 182
Composite biomaterial scaffolds for cardiac tissue engineering
Shapira, A., Feiner, R., & Dvir, T. (2016) · International Materials Reviews · doi:10.1179/1743280415y.0000000012 · Cited by 114
Cited by
Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion
Rometsch, P. A., Zhu, Y., Wu, X., & Huang, A. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110779 · Cited by 330
Zhao, L., Song, L., Santos Macías, J. G., Zhu, Y., Huang, M., Simar, A., & Li, Z. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102914 · Cited by 292
Azami, M., Siahsarani, A., Hadian, A., Kazemi, Z., Rahmatabadi, D., Kashani-Bozorg, S. F., & Abrinia, K. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.03.181 · Cited by 57
Metadata
- Authors
- Takata, N., Liu, M., Kodaira, H., Suzuki, A., & Kobashi, M.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 33
- Pages
- 101152
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3007981412
- Cited by
- 186
- References
- 3
- FWCI
- 12.98
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Anomalous strengthening by supersaturated solid solutions of selectively laser melted Al–Si-based alloys. https://app.cochat.ai/papers/10.1016/j.addma.2020.101152
- The paper
- Takata, N., Liu, M., Kodaira, H., Suzuki, A., & Kobashi, M. (2020). Anomalous strengthening by supersaturated solid solutions of selectively laser melted Al–Si-based alloys. Additive Manufacturing. https://doi.org/10.1016/j.addma.2020.101152
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.