The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion
Open accessAbstract
Laser powder bed fusion (LPBF) is one of the major additive manufacturing techniques that industries have adopted to produce complex metal components. The scientific and industrial literature from the past few years reveals that there is a growing demand for the development of high-strength aluminium alloys for LPBF. However, some major challenges remain for high-strength aluminium alloys, especially in relation to printability and the control of defects. Possible strategies that have been identified to achieve high strength with printability include the adaptation of existing high-strength cast and wrought alloys to LPBF, the design of new alloys specifically for LPBF, and the development of aluminium-based composites to achieve unique combinations of properties and processability. Whilst review papers exist for aluminium alloys in general for the related work up to 2019, the purpose of this paper is to review the latest developments related to high-strength aluminium alloys for LPBF up to early 2022, including alloy and process design strategies to achieve high strength without cracking. It aims to provide fresh insights into the current state-of-the-art based on a review of extensive yield strength data for a wide spectrum of aluminium alloys and tempers that have been studied and/or commercialised for LPBF.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Zhang, J., Song, B., Wei, Q., Bourell, D., & Shi, Y. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.004 · Cited by 1,205
Li, X., Ji, G., Chen, Z., Addad, A., Wu, Y. X., Wang, H., Vleugels, J., Humbeeck, J. V., & Kruth, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.062 · Cited by 893
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Changing the alloy composition of Al7075 for better processability by selective laser melting
Montero-Sistiaga, M. L., Mertens, R., Vrancken, B., Wang, X., Hooreweder, B. V., Kruth, J., & Humbeeck, J. V. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.08.003 · Cited by 590
Inoculation Treatment of an Additively Manufactured 2024 Aluminium Alloy with Titanium Nanoparticles
Tan, Q., Zhang, J., Sun, Q., Fan, Z., Li, G., Yin, Y. J., Liu, Y., & Zhang, M. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.06.026 · Cited by 515
Metallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms
Jia, Q., Rometsch, P. A., Kürnsteiner, P., Qi, C., Huang, A. J., Weyland, M., BOURGEOIS, L. N., & Wu, X. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.04.014 · Cited by 492
Self-citation
Metadata
- Authors
- Rometsch, P. A., Zhu, Y., Wu, X., & Huang, A.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2022-07
- Volume
- 219
- Pages
- 110779
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W4281562759
- Cited by
- 330
- References
- 65
- FWCI
- 23.12
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion. https://app.cochat.ai/papers/10.1016/j.matdes.2022.110779
- The paper
- Rometsch, P. A., Zhu, Y., Wu, X., & Huang, A. (2022). Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion. Materials & Design. https://doi.org/10.1016/j.matdes.2022.110779
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.