The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy
Open accessAbstract
The additive manufacturing (AM) of the γ` precipitation strengthened Ni-base superalloys still remains a challenge due to their susceptibility to micro-cracking. Post-processing, such as HIPing, has been shown to heal the micro-cracks but it remains desirable to prevent the micro-cracking from even occurring. Numerous studies highlighting potential mechanisms for micro-cracking exist but few solutions have been demonstrated. The intent of this study was to identify the micro-crack mechanisms and demonstrate how process and alloy modifications can reduce the micro-cracking. The micro-crack surfaces exhibit a dendritic appearance that is indicative of solidification cracking. Additionally, Gleeble experiments, simulating the L-PBF induced Heat Affected Zone (HAZ), were conducted below the γ` solvus temperature and reveal the existence of grain boundary liquation, indicative of liquation cracking. Two cracking mechanisms are thus coexisting during Laser Powder Bed Fusion (L-PBF) of CM247LC. Based on experimental evidence, reduction in the solidification interval of CM247LC was investigated as a candidate for micro-crack mitigation and a new alloy was developed. As Hf is found to have a significant influence on the freezing range of the alloy, a new CM247LC without Hf was produced and tested. The study also involved two separate and distinct processing conditions to highlight the importance of melt pool geometry on micro-crack density. Samples fabricated with the Hf-free CM247LC, CM247LC NHf, in combination with optimized processing conditions exhibit a reduction in crack density of 98 %. This study demonstrates the importance of both processing conditions and alloy chemistry on micro-cracking in L-PBF fabricated γ` hardening Ni-base superalloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
NIH Image to ImageJ: 25 years of image analysis
Schneider, C. A., Rasband, W. S., & Eliceiri, K. W. (2012) · Nature Methods · doi:10.1038/nmeth.2089 · Cited by 64,638
Cited by
Alloys-by-design: Application to new superalloys for additive manufacturing
Tang, Y. T., Panwisawas, C., Ghoussoub, J. N., Gong, Y., Clark, J. W. G., Németh, A. A. N., McCartney, D. G., & Reed, R. C. (2021) · Acta Materialia · doi:10.1016/j.actamat.2020.09.023 · Cited by 678
Powder Bed Fusion of nickel-based superalloys: A review
Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W., Ashcroft, I. A., Chen, H., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103729 · Cited by 541
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
About metastable cellular structure in additively manufactured austenitic stainless steels
Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101804 · Cited by 528
Metadata
- Authors
- Griffiths, S., Ghasemi Tabasi, H., Ivas, T., Maeder, X., De Luca, A., Zweiacker, K., Wróbel, R., Jhabvala, J., Logé, R. E., & Leinenbach, C.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 36
- Pages
- 101443
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3041544781
- Cited by
- 184
- References
- 1
- FWCI
- 10.41
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy. https://app.cochat.ai/papers/10.1016/j.addma.2020.101443
- The paper
- Griffiths, S., Ghasemi Tabasi, H., Ivas, T., Maeder, X., De Luca, A., Zweiacker, K., Wróbel, R., Jhabvala, J., Logé, R. E., & Leinenbach, C. (2020). Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy. Additive Manufacturing. https://doi.org/10.1016/j.addma.2020.101443
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.