The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A novel crack-free Ti-modified Al-Cu-Mg alloy designed for selective laser melting
Abstract
A novel crack-free Ti-modified Al-Cu-Mg alloy for SLM was developed here, based on the thermodynamic calculations of the crack susceptibility index and growth-restriction factor. We found that the introduction of Ti into the Al-Cu-Mg alloy effectively promoted the grain refinement and columnar-to-equiaxed grain transition as a result of the heterogeneous nucleation provided by Al3Ti precipitates. The hot tearing cracks were eliminated after Ti modification due to the formation of the homogeneous and fine equiaxed microstructure. We created a new high-strength Al-Cu-Mg-Ti alloy with a tensile strength of 426.4 MPa, yield strength of 293.2 MPa and ductility of 9.1%. This novel Ti-modified Al alloy with fine equiaxed grains and highly-enhanced mechanical properties offers a new compositional space for the printable lightweight material categories specifically for the SLM technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Thermo-Calc & DICTRA, computational tools for materials science
Andersson, J.-O., Helander, T., Höglund, L., Shi, P., & Sundman, B. (2002) · Calphad · doi:10.1016/s0364-5916(02)00037-8 · Cited by 4,322
Cited by
Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion
Rometsch, P. A., Zhu, Y., Wu, X., & Huang, A. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110779 · Cited by 330
Metadata
- Authors
- Zhang, J., Gao, J., Song, B., Zhang, L., Han, C., Cai, C., Zhou, K., & Shi, Y.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 38
- Pages
- 101829
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3116437754
- Cited by
- 249
- References
- 2
- FWCI
- 19.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A novel crack-free Ti-modified Al-Cu-Mg alloy designed for selective laser melting. https://app.cochat.ai/papers/10.1016/j.addma.2020.101829
- The paper
- Zhang, J., Gao, J., Song, B., Zhang, L., Han, C., Cai, C., Zhou, K., & Shi, Y. (2021). A novel crack-free Ti-modified Al-Cu-Mg alloy designed for selective laser melting. Additive Manufacturing. https://doi.org/10.1016/j.addma.2020.101829
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.