The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Nano-size IrOx catalyst of high activity and stability in PEM water electrolyzer with ultra-low iridium loading
Open accessAbstract
The balance of catalyst loading, activity and stability remains a challenge for the anode of proton exchange membrane (PEM) water electrolyzers. Here we report a nano-size IrOx/Nafion® composite catalyst that exhibits both outstanding activity for oxygen evolution reaction (OER) and stability in a PEM water electrolyzer. The IrOx/Nafion® catalyst layer is fabricated using a flame-based cost-effect process, reactive spray deposition technology. The IrOx/Nafion® catalyst shows >10 times improvement in OER mass activity compared to IrOx nanoparticles synthesized using the wet chemistry method. The IrOx/Nafion® catalyst also achieved ∼4,500 h of stable operation in MEA electrolyzer at 1.8 A cm−2 and 80 °C with ultra-low iridium loading of 0.08 mg cm−2. Analysis of the IrOx structure and the electrochemical performance revealed three key factors for balancing high stability and activity: (1) high ratio of Ir (IV) to Ir (III) species and high content of hydroxide on the surface; (2) high anodic charge and surface area due to nano-size IrOx particles that are well-dispersed in the Nafion® ionomer electrolyte; (3) homogeneous anode catalyst layer morphology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Universality in Oxygen Evolution Electrocatalysis on Oxide Surfaces
Man, I. C., Su, H., Calle‐Vallejo, F., Hansen, H. A., Martínez, J. I., Inoglu, N. G., Kitchin, J., Jaramillo, T. F., Nørskov, J. K., & Rossmeisl, J. (2011) · ChemCatChem · doi:10.1002/cctc.201000397 · Cited by 4,769
Hosseini, S. E., & Wahid, M. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.112 · Cited by 2,567
Buttler, A., & Spliethoff, H. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.003 · Cited by 2,510
Hydrogen Oxidation and Evolution Reaction Kinetics on Platinum: Acid vs Alkaline Electrolytes
Sheng, W., Gasteiger, H. A., & Shao-Horn, Y. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3483106 · Cited by 1,829
Developments and perspectives of oxide-based catalysts for the oxygen evolution reaction
Fabbri, E., Habereder, A., Waltar, K., Kötz, R., & Schmidt, T. J. (2014) · Catal. Sci. Technol. · doi:10.1039/c4cy00669k · Cited by 1,303
Reier, T., Nong, H. N., Teschner, D., Schlögl, R., & Strasser, P. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601275 · Cited by 1,253
Cited by
Recent advances in proton exchange membrane water electrolysis
Liu, R.-T., Xu, Z.-L., Li, F.-M., Chen, F.-Y., Yu, J.-Y., Yan, Y., Chen, Y., & Xia, B. Y. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00681b · Cited by 701
Is iridium demand a potential bottleneck in the realization of large-scale PEM water electrolysis?
Minke, C., Suermann, M., Bensmann, B., & Hanke-Rauschenbach, R. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.04.174 · Cited by 478
Atomically dispersed hexavalent iridium oxide from MnO 2 reduction for oxygen evolution catalysis
Li, A., Kong, S., Adachi, K., Ooka, H., Fushimi, K., Jiang, Q., Ofuchi, H., Hamamoto, S., Oura, M., Higashi, K., et al. (2024) · Science · doi:10.1126/science.adg5193 · Cited by 456
Perspectives on Low-Temperature Electrolysis and Potential for Renewable Hydrogen at Scale
Ayers, K., Danilovic, N., Ouimet, R., Carmo, M., Pivovar, B., & Bornstein, M. (2019) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-060718-030241 · Cited by 406
Self-citationWang, C. R., Stansberry, J. M., Mukundan, R., Chang, H.-M. J., Kulkarni, D., Park, A. M., Plymill, A. B., Firas, N. M., Liu, C. P., Lang, J. T., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00904 · Cited by 402
Self-citation
Metadata
- Authors
- Yu, H., Danilovic, N., Wang, Y., Willis, W., Poozhikunnath, A., Bonville, L., Capuano, C., Ayers, K., & Maric, R.
- Venue
- Applied Catalysis B: Environmental
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 239
- Pages
- 133-146
- ISSN
- 0926-3373 (ISSN-L)
- OpenAlex
- W2884958793
- Cited by
- 201
- References
- 6
- FWCI
- 3.90
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.