The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Pelletization of torrefied sawdust and properties of torrefied pellets
Open accessAbstract
Pelletization of torrefied sawdust from a fluidized bed reactor was investigated to quantify the energy consumption and pellet properties, including moisture adsorption, pellet density and Meyer hardness. Energy consumptions in compaction and extrusion for torrefied sawdust were significantly higher than those for untreated sawdust at the same compression temperature, while the moisture uptake rate of pellets decreased with increasing the severity of torrefaction. The densities of torrefied pellets were lower than the control pellet due to the loss of chemically bonded water and low-melting point compounds during torrefaction which act as a binding agent when softened at ∼100 °C. The properties of pellets were affected by the removal of most low-melting or – softening point components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chen, W.-H., & Kuo, P.-C. (2011) · Energy · doi:10.1016/j.energy.2010.12.036 · Cited by 554
Energy Input and Quality of Pellets Made from Steam-Exploded Douglas Fir (Pseudotsuga menziesii)
Lam, P. S., Sokhansanj, S., Bi, X., Lim, C. J., & Melin, S. (2011) · Energy & Fuels · doi:10.1021/ef101683s · Cited by 142
Self-citation
Cited by
Production and utilization of fuel pellets from biomass: A review
Pradhan, P., Mahajani, S. M., & Arora, A. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.09.021 · Cited by 434
Kambo, H. S., & Dutta, A. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.094 · Cited by 379
Biomass torrefaction technology: Techno-economic status and future prospects
Batidzirai, B., Mignot, A. P. R., Schakel, W. B., Junginger, H. M., & Faaij, A. P. C. (2013) · Energy · doi:10.1016/j.energy.2013.09.035 · Cited by 342
Fuel properties of hydrochar and pyrochar: Prediction and exploration with machine learning
Li, J., Pan, L., Suvarna, M., Tong, Y. W., & Wang, X. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115166 · Cited by 316
A Comprehensive Review on Biomass Torrefaction
Nhuchhen, D., Basu, P., & Acharya, B. (2014) · International Journal of Renewable Energy & Biofuels · doi:10.5171/2014.506376 · Cited by 300
Metadata
- Authors
- Li, H., Liu, X., Legros, R., Bi, X. T., Jim Lim, C., & Sokhansanj, S.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2012-05
- Volume
- 93
- Pages
- 680-685
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W1979498222
- Cited by
- 248
- References
- 2
- FWCI
- 9.94
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.