The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
High thermal conductivity phase change composite with a metal-stabilized carbon-fiber network
Open accessOverview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Erythritol/CF composite PCMs without indium particles partially collapse after 5 cycles and are completely destroyed after 10 cycles.
“As shown in Figure 13c, the composite PCMs without indium particles partially collapse after 5 cycles and were destroyed completely after 10 cycles.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [85]
When the volume fraction of carbon fibers increases, the thermal conductivity of hot-pressing-prepared composite PCMs increases exponentially, while that of melt-dispersion-prepared composite PCMs gradually increases.
“As a result, when the volume fraction of CFs increased, the thermal conductivity of composite PCMs prepared by HP exponentially increased, while those of composite PCMs prepared by MD gradually increased (Figure 13e).”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [85]
Melted indium particles weld carbon fibers into a stable percolating network, improving the thermal conductivity and cyclic endurance of erythritol/CF composite PCMs.
“The melted indium particles welded the CFs to construct a stable percolating network, which improved the thermal conductivity and cyclic endurance of composite PCMs.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [85]
Compared with the conventional melt-dispersion method, the hot-pressing method makes it easier to form the percolating filler network in composite PCMs.
“Compared to the conventional MD method, the HP method made it easier to form the percolating filler network in composite PCMs.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [85]
The network structure of erythritol/CF composite PCMs with indium particles is maintained even after 10 cycles.
“In contrast, the network structure of composite PCMs with indium particles was maintained even after 10 cycles.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [85]
MEPCMs with 24 wt% EG reached a thermal conductivity of 8.86 W mK−1, about 24 times higher than pure paraffin, due to a dense and continuous carbon network structure.
“As a result, the thermal conductivity of MEPCMs with 24 wt% EG reached 8.86 W mK−1 due to the constructed dense and continuous carbon network structure,[ 85 , 180 ] which was ≈24 times higher than that of pure paraffin.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [85]
The change in thermal performance of MPCMs was negligible after 500 thermal cycling tests due to an extraordinarily stable 3D network structure.
“Additionally, the change in the thermal performance of MPCMs was negligible after 500 thermal cycling tests due to the extraordinarily stable 3D network structure.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [85]
Citations
Cites
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2002) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,758
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, Á., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,908
Gil, A., Medrano, M., Martorell, I., Lázaro, A., Dolado, P., Zalba, B., & Cabeza, L. F. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.035 · Cited by 1,768
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,213
Self-citationPreparation and thermal characterization of paraffin/metal foam composite phase change material
Xiao, X., Zhang, P., & Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.050 · Cited by 636
Thermal conductivity enhancement of phase change materials using a graphite matrix
Mills, A., Farid, M. M., Selman, J. R., & Al‐Hallaj, S. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.11.022 · Cited by 628
Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material
Py, X., Olivès, R., & Mauran, S. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00309-4 · Cited by 623
Ji, H., Sellan, D. P., Pettes, M. T., Kong, X., Ji, J., Shi, L., & Ruoff, R. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42573h · Cited by 592
Zhang, P., Xiao, X., & Ma, Z. W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.043 · Cited by 555
Zhang, P., Meng, Z., Zhu, H., Wang, Y.-L., & Peng, S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.075 · Cited by 499
Highly conductive composites made of phase change materials and graphite for thermal storage
Pincemin, S., Olivès, R., Py, X., & Christ, M. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.11.010 · Cited by 339
Microencapsulation of Metal-based Phase Change Material for High-temperature Thermal Energy Storage
Nomura, T., Zhu, C., Sheng, N., Saito, G., & Akiyama, T. (2015) · Scientific Reports · doi:10.1038/srep09117 · Cited by 225
Self-citationTechnology of Latent Heat Storage for High Temperature Application: A Review
Nomura, T., Okinaka, N., & Akiyama, T. (2010) · ISIJ International · doi:10.2355/isijinternational.50.1229 · Cited by 218
Self-citationThermal conductivity enhancement of erythritol as PCM by using graphite and nickel particles
Oya, T., Nomura, T., Tsubota, M., Okinaka, N., & Akiyama, T. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.05.033 · Cited by 215
Self-citationFukahori, R., Nomura, T., Zhu, C., Sheng, N., Okinaka, N., & Akiyama, T. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.106 · Cited by 197
Self-citationZhang, P., Xiao, X., Meng, Z., & Li, M. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.10.004 · Cited by 176
Li, Y., Li, J., Deng, Y., Guan, W., Wang, X., & Qian, T. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.03.010 · Cited by 176
High thermal conductivity phase change composite with percolating carbon fiber network
Nomura, T., Tabuchi, K., Zhu, C., Sheng, N., Wang, S., & Akiyama, T. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.05.042 · Cited by 175
Self-citationZhong, Y., Li, S., Wei, X., Liu, Z., Guo, Q., Shi, J., & Liu, L. (2009) · Carbon · doi:10.1016/j.carbon.2009.09.033 · Cited by 170
Polyols as phase change materials for surplus thermal energy storage
Gunasekara, S. N., Pan, R., Chiu, J. N., & Martin, V. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.064 · Cited by 166
Encapsulation of copper-based phase change materials for high temperature thermal energy storage
Zhang, G., Li, J., Chen, Y., Xiang, H., Ma, B., Xu, Z., & Ma, X. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.05.012 · Cited by 166
Phase change composite based on porous nickel and erythritol
Oya, T., Nomura, T., Okinaka, N., & Akiyama, T. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.02.033 · Cited by 160
Self-citationAcem, Z., Lopez, J., & del Barrio, E. P. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.03.013 · Cited by 157
Thermal and flow behaviors in heat transportation container using phase change material
Kaizawa, A., Kamano, H., Kawai, A., Jozuka, T., Senda, T., Maruoka, N., & Akiyama, T. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.07.022 · Cited by 152
Self-citationFukahori, R., Nomura, T., Zhu, C., Sheng, N., Okinaka, N., & Akiyama, T. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.164 · Cited by 142
Self-citationExperimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit
Fleming, E., Wen, S., Shi, L., & da Silva, A. K. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.022 · Cited by 140
Xiao, X., Zhang, P., & Li, M. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.04.007 · Cited by 134
Moreno, P., Miró, L., Solé, A., Barreneche, C., Solé, C., Martorell, I., & Cabeza, L. F. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.022 · Cited by 125
Unidirectional freezing of phase change materials saturated in open-cell metal foams
Feng, S., Zhang, Y., Shi, M., Wen, T., & Lu, T. J. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.09.055 · Cited by 112
Hong, S. ‐., & Herling, D. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200700023 · Cited by 85
Exergy recovery from steelmaking off-gas by latent heat storage for methanol production
Maruoka, N., & Akiyama, T. (2005) · Energy · doi:10.1016/j.energy.2005.05.023 · Cited by 82
Self-citationPincemin, S., Py, X., Olivès, R., Christ, M., & Öttinger, O. (2007) · Journal of Solar Energy Engineering · doi:10.1115/1.2804620 · Cited by 67
Tao, Y. B., Lin, C. H., & He, Y. L. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.07.058 · Cited by 64
High performance storage composite for the enhancement of solar domestic hot water systems
Haillot, D., Goetz, V., Py, X., & Benabdelkarim, M. (2011) · Solar Energy · doi:10.1016/j.solener.2011.02.016 · Cited by 61
Thermophysical properties of high-density graphite foams and their paraffin composites
Song, J., Guo, Q., Zhong, Y., Gao, X., Feng, Z., Fan, Z., Shi, J., & Liu, L. (2012) · New Carbon Materials · doi:10.1016/s1872-5805(12)60002-x · Cited by 56
Gokon, N., Nakamura, S., Yamaguchi, T., & Kodama, T. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.03.145 · Cited by 37
Ma, F., Zhang, P., Xia, Z. Z., & Li, M. (2015) · Energy · doi:10.1016/j.energy.2015.05.006 · Cited by 11
Flagged first, then by citations
Cited by
Sorted by citations
Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion
Chen, X., Cheng, P., Tang, Z., Xu, X., Gao, H., & Wang, G. (2021) · Advanced Science · doi:10.1002/advs.202001274 · Cited by 483
Cheng, P., Chen, X., Gao, H., Zhang, X., Tang, Z., Li, A., & Wang, G. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105948 · Cited by 350
Zhang, J., Shao, D., Jiang, L., Zhang, G., Wu, H., Day, R., & Jiang, W. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112207 · Cited by 263
Solvothermal synthesis and applications of micro/nano carbons: A review
Huo, Y., Xiu, S., Meng, L., & Quan, B. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138572 · Cited by 254
Bahiraei, F., Fartaj, A., & Nazri, G. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.065 · Cited by 246
Arshad, A., Jabbal, M., & Yan, Y. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112444 · Cited by 222
Tian, H., Du, L., Wei, X., Deng, S., Wang, W., & Ding, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.07.027 · Cited by 151
Sheng, N., Nomura, T., Zhu, C., Habazaki, H., & Akiyama, T. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.12.018 · Cited by 135
Self-citationKurnia, J. C., & SASMITO, A. P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.087 · Cited by 132
Jiang, Z., Ouyang, T., Yang, Y., Chen, L., Fan, X., Chen, Y., Li, W., & Fei, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.052 · Cited by 127
Wang, J., Jia, X., Atinafu, D. G., Wang, M., Wang, G., & Lu, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05594c · Cited by 109
Dong, K., Sheng, N., Zou, D., Wang, C., Shimono, K., Akiyama, T., & Nomura, T. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114685 · Cited by 93
Self-citationGao, L., Zhao, J. L., An, Q., Zhao, D., Feng, M., & Liu, X. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.073 · Cited by 83
Talluri, T., Kim, T. H., & Shin, K. J. (2020) · Energies · doi:10.3390/en13030507 · Cited by 73
Experimental study on effective thermal conductivity of microcapsules based phase change composites
Wang, T., Wang, S., & Wu, W. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.02.068 · Cited by 72
Self-citationWang, T., Jiang, Y., Huang, J., & Wang, S. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.02.108 · Cited by 69
Self-citationZhang, H., Cheng, J., Wang, Q., Xiong, D., Song, J., Tang, Z., & Liu, X. (2021) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2021.111135 · Cited by 67
Ali, S. A., Habib, K., Younas, M., Saidur, R., Das, L., Rubbi, F., Mulk, W. U., & Rezakazemi, M. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c03634 · Cited by 68
Li, Z., Wu, Y., Zhuang, B., Zhao, X., Tang, Y. Z., Ding, X., & Chen, K. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.10.046 · Cited by 66
Atinafu, D. G., Dong, W., Wang, J., Huang, X., Wang, J., Gao, H., & Wang, G. (2018) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201800811 · Cited by 63
High heat storing and thermally diffusive artificial skin for wearable thermal management
Jung, Y., Ha, I., Kim, M., Ahn, J., Lee, J., & Ko, S. H. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107979 · Cited by 59
Accelerating the solar-thermal energy storage via inner-light supplying with optical waveguide
Zhang, Y., Tang, J., Chen, J., Zhang, Y., Chen, X., Ding, M., Zhou, W., Xu, X., Liu, H., & Xue, G. (2023) · Nature Communications · doi:10.1038/s41467-023-39190-1 · Cited by 57
Maruoka, N., Tsutsumi, T., Ito, A., Hayasaka, M., & Nogami, H. (2020) · Energy · doi:10.1016/j.energy.2020.118055 · Cited by 51
Kang, S., Cha, J. H., Seo, K., Kim, S., Cha, Y., Lee, H., Park, J., & Choi, W. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.127 · Cited by 49
He, S., Wang, W., Wei, L., & Ding, J. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101665 · Cited by 43
Zhang, J., Li, X., He, F., He, J., Zhong, Z., & Zhang, G. (2017) · International Journal of Photoenergy · doi:10.1155/2017/2929473 · Cited by 37
Xie, F., Dai, X., Zhuo, L., Dai, Q., He, C., & Lu, Z. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117479 · Cited by 32
Thermal conductivity of highly filled polymer nanocomposites
Drozdov, A. D., & Christiansen, J. D. C. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107717 · Cited by 29
Wang, K., Cai, N., Yu, F., & Wang, M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105335 · Cited by 27
Zhu, C., Kim, C. G., Aoki, Y., & Habazaki, H. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700583 · Cited by 26
Self-citationPore-scale heat transfer of heat sink filled with stacked 2D metal fiber-PCM composite
Ren, Q., Wang, Z., Zhu, J., & Qu, Z. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2020.106739 · Cited by 26
Zhang, G., Hu, P., & Liu, M. (2017) · Science China Technological Sciences · doi:10.1007/s11431-016-9001-x · Cited by 25
Lei, H., Fu, C., Zou, Y.-J., Guo, S., & Huo, J.-C. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11753e · Cited by 19
Mohan, M., Manjunath, V., Mehdi, S. M. Z., Soni, S. K., Dewangan, S. K., Lee, H., Awasthi, A., Sharma, A., Sharma, A., Song, E., et al. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104142 · Cited by 21
Numerical Investigation on Melting Process of a Phase Change Material Under Supergravity
Xu, Y., Zhu, Z., Li, S., & Wang, J. (2020) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4047524 · Cited by 20
Development of Novel Microencapsulated Hybrid Latent/Chemical Heat Storage Material
Koide, H., Takahashi, T., Sakai, H., Kurniawan, A., Chiu, J. N., & Nomura, T. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c01159 · Cited by 19
Self-citationFabiani, C., & Pisello, A. L. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.09.008 · Cited by 19
Li, L., Huang, Y., Li, W., Zou, L., Wu, X., Li, Y., & Cheng, X. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107668 · Cited by 15
Ma, Z., Song, Z., Jiang, Q., & Lv, W. (2020) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2020.125064 · Cited by 14
Zhang, X., Zhang, B., Sun, M., Li, J., & Liu, C. (2022) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-021-07680-x · Cited by 13
Bao, R., Yan, S., Wang, R., & Li, Y. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45555 · Cited by 13
Xie, H., Zhao, Y., Ma, Y., Wen, B., Zhao, L., Han, B., Li, Z., Deng, Q., & Zhang, K. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112604 · Cited by 11
Novel form-stable phase change material composite for high-efficiency room temperature control
Chernousov, A. A., & Chan, B. Y. B. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.05.039 · Cited by 11
Improvement of Thermal Performance of Electric Vehicle Battery Pack with Phase-change Material
Angani, A., Kim, E., & Shin, K. (2020) · Sensors and Materials · doi:10.18494/sam.2020.2695 · Cited by 11
Hu, S., Yao, M., Zhu, B., Zhang, N., & Yuan, R. (2022) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4055930 · Cited by 10
Experimental and Numerical Studies on Phase Change Materials
Wang, C., & Zhu, Y. P. (2018) · InTech eBooks · doi:10.5772/intechopen.76807 · Cited by 8
Advances in erythritol-based composite phase change materials
Peng, F., Zhu, X., Lin, R., Lu, R., & Lü, F. (2024) · Sustainable Energy & Fuels · doi:10.1039/d4se00171k · Cited by 7
Mba, J. C., Shimizu, Y., Kawaguchi, T., Sato, Y., Dong, K., Jeem, M., & Nomura, T. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.115626 · Cited by 7
Self-citationQin, Y., Ding, L., Jiang, Z., Zhang, Y., Ye, C., Liu, J., Zhang, Y., Balogun, M.-S., & Ouyang, T. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta05190d · Cited by 7
Aslani, H., & Moghiman, M. (2018) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2018.01.009 · Cited by 7
Said, L. B., Basem, A., Sultan, A. J., Singh, P. K., Jasim, D. J., Anqi, A. E. M., Rajab, H., Ahmed, M., & Rajhi, W. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.108537 · Cited by 7
Kaleni, A., Lebelo, K., Mochane, M. J., Mokhena, T. C., & Motloung, M. T. (2022) · Journal of Polymer Engineering · doi:10.1515/polyeng-2022-0020 · Cited by 6
Fouzi, M. S. A., Amin, N., Mohamad, A., Mohamad, M. S., Majid, M. S. A., Aziz, N. A., Belusko, M., & Bruno, F. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.120995 · Cited by 5
Microwave-Heated Graphene Realizes Ultrafast Energy Conversion and Thermal Storage
Yang, C., Yang, H., Bai, Y., Wu, X., Guo, W., Li, M., Zhang, F., Wang, P., & Han, X. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03739 · Cited by 5
Zhang, S., Wang, Y., Deng, F., Tian, D., Xu, Y., Zhao, T., Sun, R., & Hu, Y. (2025) · Small · doi:10.1002/smll.202500973 · Cited by 4
Biomimetic design and modelling of hybrid short and long carbon fibres reinforced PPS/PES composites
Wang, K., Liu, Y., Bai, J., Wang, H., Chang, Z., & Le, H. (2026) · Composite Structures · doi:10.1016/j.compstruct.2026.120234 · Cited by 3
Patel, J., & Patel, R. (2020) · Green energy and technology · doi:10.1007/978-981-15-9251-5_7 · Cited by 3
Mohan, M., Ramasamy, R., Josline, M. J., Shridharan, T. S., Awasthi, A., Dewangan, S. K., Lee, H., Song, E., Lee, J., Cho, I. S., et al. (2025) · International Journal of Energy Research · doi:10.1155/er/9983214 · Cited by 3
CFD and Thermal Analysis of Electric Vehicle Battery Pack
Goyal, D., Kaur, R., Sood, A., Sain, I., Bhandari, S., & Kumar, A. (2024) · IEEE India Council International Subsections Conference (INDISCON) · doi:10.1109/indiscon62179.2024.10744203 · Cited by 2
Remya, P. K., & Manju, M. S. (2025) · Energy Storage · doi:10.1002/est2.70235 · Cited by 2
Forced convective heat transfer for laminar flow of paraffin: A numerical and experimental study
Ni, L., Qv, D., Wang, J., Shang, R., & Yao, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.118 · Cited by 2
Ni, L., Qv, D., Wang, J., Shang, R., & Yao, Y. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.04.001 · Cited by 2
Yang, P., Yang, X., Chen, S., Zhu, H., Zhao, Z., Yan, C., & Wang, Y. (2026) · Polymer · doi:10.1016/j.polymer.2026.130236 · Cited by 1
Thermal-charging characteristics of a rotatable finned tube based phase-change heat storage device
Lu, S., Wu, S., Fan, C., Guo, X., Cui, H., Li, J., & Wang, F. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123173 · Cited by 1
Kim, C. B., Song, S. S., Talluri, T., Angani, A., & Shin, K. J. (2020) · IEEE International Conference on Architecture, Construction, Environment and Hydraulics (ICACEH) · doi:10.1109/icaceh51803.2020.9366266
Metal-organic frameworks and covalent-organic frameworks in thermal transport
Xu, P., Bao, Y., Liu, C., Nastic, S., & Xu, B. (2026) · Nano Research · doi:10.26599/nr.2026.94908524
Jayathunga, D., Karunathilake, H., Narayana, M., & Witharana, S. (2026) · Frontiers in Energy Research · doi:10.3389/fenrg.2026.1865512
Sahu, M., & Bhattacharya, J. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.112275
Yılmaz, Y., Özdemir, M., Özdemir, S., Ermis, E., & Hassan, Y. (2026) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2026.2734521
Ou, L., Zheng, L., Lin, P., & Chen, Y. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.133404
Metadata
- Authors
- Nomura, T., Zhu, C., Nan, S., Tabuchi, K., Wang, S., & Akiyama, T.
- Affiliations
- Hokkaido University (JP)
- South China University of Technology (CN)
- Corresponding author
- Nomura, Takahiro
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2016-10
- Volume
- 179
- Pages
- 1-6
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2474093774
- Cited by
- 71
- References
- 37
- Citations by year
- 2026: 9 · 2025: 6 · 2024: 5 · 2023: 3 · 2022: 7 · 2021: 3 · 2020: 13 · 2019: 3 · 2018: 8 · 2017: 12 · 2016: 2
- FWCI
- 7.41
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- www.elsevier.com/open-access/userlicense/1.0/ (am, 637 d)
- doi.org/10.15223/policy-017 (stm-asf)
- doi.org/10.15223/policy-037 (stm-asf)
- doi.org/10.15223/policy-012 (stm-asf)
- doi.org/10.15223/policy-029 (stm-asf)
- doi.org/10.15223/policy-004 (stm-asf)
- Locations
- Applied Energy (acceptedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- Japan Science and Technology Agency
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Keywords
- composite phase change materials, thermal conductivity, erythritol, carbon fiber, percolation network, thermal cycling stability, hot pressing, sugar alcohols, molten salts, latent heat storage
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
