The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
The impact of thermal mass on building energy consumption
Open accessAbstract
This paper presents new metrics to measure the effect of thermal mass on the energy required to heat and cool buildings. Previous studies have been flawed as they have not considered the interaction between intermittent occupancy and thermal mass, which has a significant impact on overall energy use. However, existing parameters do not adequately capture these effects, so the new metrics developed in this paper are used to analyse the impact of thermal mass in hot climates with active cooling, and cold climates with active heating. The results agree with existing literature that high thermal mass structures are likely to be effective in hot climates; however, in cold climates the drawbacks of high thermal mass likely outweigh the advantages, and high thermal mass can cause an increase in energy use. This finding has implications for the design of buildings in cold climates, and contradicts the commonly-held assumption that high thermal mass is correlated with low energy use. The new metrics (transient energy ratio and effective U-value) provide a generalisable method to quantify these effects. They are further used here to analyse the dynamic performance of heavily insulated buildings and show that high thermal mass often leads to higher energy use in cold climates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The American National Standards Institute
Andersen, F. A. (1984) · IEEE Engineering in Medicine and Biology Magazine · doi:10.1109/memb.1984.5006016 · Cited by 1,212
A general theory of an elastic-plastic continuum
Green, A. E., & Naghdi, P. M. (1965) · Archive for Rational Mechanics and Analysis · doi:10.1007/bf00251666 · Cited by 935
Aste, N., Angelotti, A., & Buzzetti, M. (2009) · Energy and Buildings · doi:10.1016/j.enbuild.2009.06.005 · Cited by 313
Influence of insulation configuration on heating and cooling loads in a continuously used building
Kossecka, E., & Kosny, J. (2002) · Energy and Buildings · doi:10.1016/s0378-7788(01)00121-9 · Cited by 248
Galvin, R. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2013.11.004 · Cited by 206
Gregory, K., Moghtaderi, B., Sugo, H., & Page, A. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2007.04.001 · Cited by 178
Johra, H., & Heiselberg, P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.145 · Cited by 158
van Hooff, T., Blocken, B. J. E., Timmermans, H. J. P., & Hensen, J. J. (2015) · Energy · doi:10.1016/j.energy.2015.11.036 · Cited by 131
An improved lumped parameter method for building thermal modelling
Underwood, C. P. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.05.001 · Cited by 84
Gori, V., Marincioni, V., Biddulph, P., & Elwell, C. A. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.10.043 · Cited by 66
Byrne, A. R., Byrne, G., Davies, A. R., & Robinson, A. J. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.02.044 · Cited by 54
Hoes, P.-J., & Hensen, J. J. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.10.036 · Cited by 46
The optimisation of intermittent heating
Bloomfield, D. P., & Fisk, D. (1977) · Building and Environment · doi:10.1016/0360-1323(77)90006-3 · Cited by 44
Evaluation of passive ventilation provision in domestic housing retrofit
Kinnane, O., Sinnott, D., & Turner, W. J. N. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.06.032 · Cited by 41
Self-citationHeim, D., & Wieprzkowicz, A. (2016) · Journal of Building Performance Simulation · doi:10.1080/19401493.2015.1126649 · Cited by 37
Cetin, K. S., Manuel, L., & Novoselac, A. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.11.012 · Cited by 35
A new transient method for determining thermal properties of wall sections
Robinson, A. J., Lesage, F. J., Reilly, A., et al. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.02.029 · Cited by 35
Self-citationExploring the optimal thermal mass to investigate the potential of a novel low-energy house concept
Hoes, P.-J., Trcka, M. M., Hensen, J. J., & Bonnema, B. H. (2010) · TU/e Research Portal · Cited by 11
Thermal Performance of Buildings with Heavy Walls
Bellamy, L., & Mackenzie, D. W. R. (2001) · Cited by 9
Cited by
Kuczyński, T., & Staszczuk, A. (2020) · Energy · doi:10.1016/j.energy.2020.116984 · Cited by 131
Metadata
- Authors
- Reilly, A., & Kinnane, O.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2017-07
- Volume
- 198
- Pages
- 108-121
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2608706652
- Cited by
- 266
- References
- 19
- FWCI
- 29.63
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.