The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Design of effective fins for fast PCM melting and solidification in shell-and-tube latent heat thermal energy storage through topology optimization
Open accessAbstract
This paper presents a unique solution to the problem of heat transfer intensification in shell-and-tube latent heat thermal energy storage units by means of high conducting fins. We developed a design approach using topology optimization and multi-phase computational fluid dynamics. No assumption is made about the fins layout, which freely evolves along the optimization process resulting in more efficient non-trivial geometries. At each optimization iteration, the fluid-dynamic response in the phase change material is computed by solving the transient Navier-Stokes equations augmented with a phase-change porosity term. Coupling large design freedom to detailed physics modeling allowed studying the effect of convective transport on both design and performance of latent heat thermal storage units. Results indicate that accounting for fluid flow in design optimization studies is crucial for performance. It is shown that melting and solidification can be enhanced remarkably through natural convection by using well engineered fins with specific design features, that could hardly be revealed with alternative design routes. These features make designs optimized for melting fundamentally different from those optimized for solidification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Brooks, A. N., & Hughes, T. J. R. (1982) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(82)90071-8 · Cited by 5,332
Optimal shape design as a material distribution problem
Bendsøe, M. P. (1989) · Structural Optimization · doi:10.1007/bf01650949 · Cited by 4,521
Topology optimization approaches: A comparative review
Sigmund, O., & Maute, K. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0978-6 · Cited by 2,890
Self-citationSigmund, O., & Petersson, J. (1998) · Structural Optimization · doi:10.1007/bf01214002 · Cited by 2,118
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
On projection methods, convergence and robust formulations in topology optimization
Wang, F., Lazarov, B. S., & Sigmund, O. (2011) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-010-0602-y · Cited by 1,859
The COC algorithm, Part II: Topological, geometrical and generalized shape optimization
Zhou, M., & Rozvany, G. I. N. (1991) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(91)90046-9 · Cited by 1,827
Morphology-based black and white filters for topology optimization
Sigmund, O. (2007) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-006-0087-x · Cited by 1,727
Hughes, T. J. R., Franca, L. P., & Balestra, M. (1986) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(86)90025-3 · Cited by 1,450
A survey of structural and multidisciplinary continuum topology optimization: post 2000
Deaton, J. D., & Grandhi, R. V. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0956-z · Cited by 1,405
Topology optimization of non-linear elastic structures and compliant mechanisms
Bruns, T. E., & Tortorelli, D. A. (2001) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(00)00278-4 · Cited by 1,385
Topology optimization of fluids in Stokes flow
Borrvall, T., & Petersson, J. (2003) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.426 · Cited by 1,234
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Fan, L., & Khodadadi, J. M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.007 · Cited by 1,003
An Introduction to the Adjoint Approach to Design
Giles, M. B., & Pierce, N. A. (2000) · Flow, Turbulence and Combustion · doi:10.1023/a:1011430410075 · Cited by 989
Multifrontal parallel distributed symmetric and unsymmetric solvers
Amestoy, P. R., Duff, I. S., & L'Excellent, J.-Y. (2000) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(99)00242-x · Cited by 948
Thermal energy storage: Recent developments and practical aspects
Zhang, H., Baeyens, J., Cáceres, G., Degrève, J., & Lv, Y. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.003 · Cited by 910
Liu, M., Saman, W., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 864
Performance enhancement in latent heat thermal storage system: A review
Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 702
Melting and Solidification of a Pure Metal on a Vertical Wall
Gau, C., & Viskanta, R. (1986) · Journal of Heat Transfer · doi:10.1115/1.3246884 · Cited by 655
A review of potential materials for thermal energy storage in building applications
Tatsidjodoung, P., Le Pierrès, N., & Luo, L. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.025 · Cited by 643
Enhance heat transfer for PCM melting in triplex tube with internal–external fins
Mat, S., Al-Abidi, A. A., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.003 · Cited by 604
Maximization of performance of a PCM latent heat storage system with innovative fins
Sciacovelli, A., Gagliardi, F., & Verda, V. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.07.015 · Cited by 603
Self-citationAgyenim, F., Eames, P., & Smyth, M. (2009) · Solar Energy · doi:10.1016/j.solener.2009.04.007 · Cited by 596
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Topology optimization of channel flow problems
Gersborg-Hansen, A., Sigmund, O., & Haber, R. B. (2005) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-004-0508-7 · Cited by 553
Bridging topology optimization and additive manufacturing
Zegard, T., & Paulino, G. H. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1274-4 · Cited by 457
Melting in a vertical cylindrical tube: Numerical investigation and comparison with experiments
Shmueli, H., Ziskind, G., & Letan, R. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.05.028 · Cited by 436
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
Rathod, M. K., & Banerjee, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.074 · Cited by 427
Experimental study of melting and solidification of PCM in a triplex tube heat exchanger with fins
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2013.09.007 · Cited by 402
Large scale three-dimensional topology optimisation of heat sinks cooled by natural convection
Alexandersen, J., Sigmund, O., & Aage, N. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.05.013 · Cited by 358
Rabienataj Darzi, A. A., Jourabian, M., & Farhadi, M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.016 · Cited by 329
Topological design of heat dissipating structure with forced convective heat transfer
Yoon, G. H. (2010) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-010-0328-1 · Cited by 272
Thermal energy storage system integration forms for a sustainable future
Li, G., & Zheng, X. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.076 · Cited by 218
Development of high temperature phase-change-material storages
Laing, D., Bauer, T., Breidenbach, N., Hachmann, B., & Johnson, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.063 · Cited by 197
Sciacovelli, A., Colella, F., & Verda, V. (2013) · International Journal of Energy Research · doi:10.1002/er.2974 · Cited by 186
Self-citationTopology optimization for heat transfer enhancement in Latent Heat Thermal Energy Storage
Pizzolato, A., Sharma, A., Maute, K. K., Sciacovelli, A., & Verda, V. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.05.098 · Cited by 170
Self-citationAbokersh, M. H., Osman, M., El-Baz, O., El-Morsi, M., & Sharaf, O. (2018) · International Journal of Energy Research · doi:10.1002/er.3765 · Cited by 159
Natural convection in high temperature flat plate latent heat thermal energy storage systems
Vogel, J., Felbinger, J., & Johnson, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.10.001 · Cited by 149
Experimental validation of a CFD model for tubes in a phase change thermal energy storage system
Tay, N. H. S., Bruno, F., & Belusko, M. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.10.054 · Cited by 120
Analysis of industrial-scale high-temperature combined sensible/latent thermal energy storage
Geissbühler, L., Kolman, M., Zanganeh, G., Haselbacher, A., & Steinfeld, A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.12.031 · Cited by 116
Numerical analysis of a medium scale latent energy storage unit for district heating systems
Colella, F., Sciacovelli, A., & Verda, V. (2012) · Energy · doi:10.1016/j.energy.2012.03.043 · Cited by 95
Self-citationA level-set method for steady-state and transient natural convection problems
Coffin, P., & Maute, K. K. (2015) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1377-y · Cited by 85
Self-citationExperimental investigation of dynamic melting in a tube-in-tank PCM system
Tay, N. H. S., Bruno, F., & Belusko, M. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.11.035 · Cited by 84
A design approach for integrating thermoelectric devices using topology optimization
Soprani, S., Haertel, J. H. K., Lazarov, B. S., Sigmund, O., & Engelbrecht, K. L. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.024 · Cited by 81
An effectiveness-NTU technique for characterising a finned tubes PCM system using a CFD model
Tay, N. H. S., Belusko, M., Castell, A., Cabeza, L. F., & Bruno, F. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.06.041 · Cited by 79
Latent heat storage using renewable saturated diesters as phase change materials
Floros, M. C., & Narine, S. S. (2016) · Energy · doi:10.1016/j.energy.2016.09.085 · Cited by 42
Level set topology optimization of scalar transport problems
Makhija, D. S., & Maute, K. K. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-014-1142-7 · Cited by 28
Self-citationGalerkin gradient least-squares formulations for transient conduction heat transfer
Ilinca, F., & Hétu, J. ‐. (2002) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00242-6 · Cited by 25
Cited by
Wang, X., Li, W., Luo, Z., Wang, K., & Shah, S. P. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111923 · Cited by 493
Jayathunga, D. S., Karunathilake, H. P., Narayana, M., & Witharana, S. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113904 · Cited by 298
Kalapala, L., & Devanuri, J. K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.10.024 · Cited by 269
Li, Q., Li, C., Du, Z., Jiang, F., & Ding, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113806 · Cited by 221
Hosseinzadeh, K., Erfani Moghaddam, M. A., Asadi, A., Mogharrebi, A. R., Jafari, B., Hasani, M. R., & Ganji, D. D. (2021) · Alexandria Engineering Journal · doi:10.1016/j.aej.2020.12.001 · Cited by 171
Metadata
- Authors
- Pizzolato, A., Sharma, A., Maute, K., Sciacovelli, A., & Verda, V.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2017-12
- Volume
- 208
- Pages
- 210-227
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2765291333
- Cited by
- 344
- References
- 48
- FWCI
- 17.93
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.