The DOI matches its Crossref record; 163 of the 163 references it cites were found in a registry or an index.
Influence of operational and design parameters on the performance of a PCM based heat exchanger for thermal energy storage – A review
Abstract
Abstract Thermal energy storage using phase change materials (PCM) proved to be a promising technology because of its relative advantages over the other types of energy storage methods. Along with thermophysical properties of PCM, the performance of latent heat based thermal energy storage system depends on the design of the heat exchanger. Although extensive research is being carried out over the past few years, an integrated study on the design of PCM heat exchanger is scarce. This review presents the in-depth analysis of various operating conditions and design parameters that need to be considered in the design of a PCM based heat exchanger. Shell and tube type, triple concentric tube type heat exchangers are discussed along with the various heat transfer techniques employed in both the types of heat exchangers. In each enhancement technique, the influencing geometric parameters are summarized, and the recommended values of those parameters are provided. The present article is expected to be a helpful reference for the researchers working in the field of thermal energy storage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Investigation on Convective Heat Transfer and Flow Features of Nanofluids
Xuan, Y., & Li, Q. (2003) · Journal of Heat Transfer · doi:10.1115/1.1532008 · Cited by 4,644
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Review on phase change materials (PCMs) for cold thermal energy storage applications
Oró, E., de Gracia, A., Castell, A., Farid, M. M., & Cabeza, L. F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.03.058 · Cited by 1,144
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
Sarı, A., & Karaipekli, A. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.004 · Cited by 978
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
Zhao, C. Y., Lu, W., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 757
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Cited by
Sadeghi, G. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.01.017 · Cited by 380
Jayathunga, D. S., Karunathilake, H. P., Narayana, M., & Witharana, S. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113904 · Cited by 298
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Li, Q., Li, C., Du, Z., Jiang, F., & Ding, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113806 · Cited by 221
Akhmetov, B., Navarro, M. E., Seitov, A., Kaltayev, A., Bakenov, Z., & Ding, Y. (2019) · Solar Energy · doi:10.1016/j.solener.2019.10.015 · Cited by 65
Metadata
- Authors
- Kalapala, L., & Devanuri, J. K.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 20
- Pages
- 497-519
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W2898624949
- Cited by
- 269
- References
- 163
- FWCI
- 13.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of operational and design parameters on the performance of a PCM based heat exchanger for thermal energy storage – A review. https://app.cochat.ai/papers/10.1016/j.est.2018.10.024
- The paper
- Kalapala, L., & Devanuri, J. K. (2018). Influence of operational and design parameters on the performance of a PCM based heat exchanger for thermal energy storage – A review. Journal of Energy Storage. https://doi.org/10.1016/j.est.2018.10.024
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.