CoChat
Cited by 177

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Biphasic solvent for CO2 capture: Amine property-performance and heat duty relationship

Shen, Yao, Jiang, Chenkai, Zhang, Shihan, Chen, Jun, Wang, Lidong, Chen, Jianmeng · 2018 · Applied Energy

Abstract

The main issue related to the deployment of the absorption based technology for CO2 capture is the intensive energy penalty. Biphasic solvent is regarded as a promising candidate for CO2 capture due to its potential in significant reduction of the energy consumption. However, currently, the development of biphasic solvents relies on the intensity of solvent screening work. To address this issue, this work investigated the relationships between the solvent properties and CO2 capture performance such as absorption capacity, phase separation behavior, kinetics, and thermodynamics. Ten primary/secondary amines and eight tertiary amines with different alkalinity (pKa) and hydrophobicity (Log P) were used as the main components of the biphasic solvent. Experimental results revealed that the tertiary amine’s alkalinity determines the absorption capacity of the biphasic solvent. The maximum CO2 absorption capacity was achieved by the tested biphasic solvent with a tertiary amine of a pKa around 9.8. Compared with the tertiary amine, the primary amine’s hydrophobicity was more sensible to the phase separation behavior of the solvent. The low Log P value of the primary amine and the high Log P value of the tertiary amine befitted the phase separation. Kinetic analysis indicate that the total mass transfer resistance of the rich solution decreased with the increase in the Log P value of the tertiary amine. Interestingly, the highest enhancement factor was achieved by the tertiary amine (2-(diethylamino)ethanol) with the pKa of 9.79. Further increase of the tertiary amine’s pKa decreased the enhancement factor of the biphasic solvent. This was attributed to the limitation of mass transfer of tertiary amine from the upper phase to lower phase. Furthermore, thermodynamic analysis showed that the sensible heat and the latent heat of the solvents decreased and increased, respectively, with the increase of log P value of the tertiary amines. The lowest reaction enthalpy and heat duty of the tested biphasic solvents were 45.8% and 52% lower than those of the benchmark monoethanolamine solution, respectively. Overall, compared with the primary amine, the selection of the tertiary amine is more important to achieve a great performance for CO2 capture. Therefore, the tertiary amine with a moderate pKa and Log P is beneficial to achieve a high absorption capacity, fast absorption rate, and low heat duty of the biphasic solvent.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.apenergy.2018.09.005

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 177

Metadata

Authors
Shen, Y., Jiang, C., Zhang, S., Chen, J., Wang, L., & Chen, J.
Venue
Applied Energy
Publisher
Elsevier BV
Published
2018-11
Volume
230
Pages
726-733
ISSN
0306-2619 (ISSN-L)
OpenAlex
W2892095127
Cited by
177
References
1
FWCI
8.63
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.