The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Dynamic thermal management for industrial waste heat recovery based on phase change material thermal storage
Open accessAbstract
Abstract To effectively utilize waste heat resulted in industrial production processes, this study investigates the dynamic thermal management using phase change material (PCM) thermal storage technique for the heat recovery system. The heat transfer process of a tube-type PCM storage module is analyzed and the dynamic model is developed for the optimization of system operation. The flag to indicate different working modes of the storage module is introduced as a system decision variable, which is used in developing an intelligent algorithm adopting biogeography-based optimization method for dynamic control of the system. The effectiveness of the dynamic model is verified via real demonstration experimental tests and the maximum relative error is 5.47%. The validation of the algorithm and evaluation of the dynamic thermal management are carried out by applications in the heat recovery of the steel sintering process. The influences of phase change enthalpy on the system performance are further studied to highlight the role of latent heat in thermal management. Results show that the proportions of fuel consumed in the off, flat and high peak energy utilization sections are optimized from the original 1:6.95:21.71 to 1:2.57:7.02 through the peak shaving and the total consumption of fuel per day is decreased from 6.81 t to 6.34 t. When the phase change enthalpy is reduced from 103 kJ kg−1 to 1 kJ kg−1, the decrease of the energy recovered by the PCM modules leads to the additional 0.06 t fuel consumption per day.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mohamed, S. A., Al-Sulaiman, F. A., Ibrahim, N. I., Zahir, M. H., Al-Ahmed, A., Saidur, R., Yılbaş, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.012 · Cited by 759
Cited by
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020) · Energy · doi:10.1016/j.energy.2020.118698 · Cited by 444
Jeje, S. O., Marazani, T., Obiko, J. O., & Shongwe, M. B. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.06.344 · Cited by 290
Recent developments in the passive and hybrid thermal management techniques of lithium-ion batteries
Patel, J. R., & Rathod, M. K. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228820 · Cited by 276
Li, W. Q., Guo, S. J., Tan, L., Liu, L. L., & Ao, W. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120737 · Cited by 192
Metadata
- Authors
- Li, D., Wang, J., Ding, Y., Yao, H., & Huang, Y.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 236
- Pages
- 1168-1182
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2906346966
- Cited by
- 186
- References
- 1
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.