Design and operating evaluation of a finned shell-and-tube thermal energy storage unit filled with metal foam
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
This paper introduced a further heat transfer enhancement technique by inserting porous metal foam into the fin interstitials for a shell-and-tube thermal energy storage unit. The energy charging/discharging were evaluated by means of indicators including complete melting/solidification time, heat transfer coefficient, temperature response and energy storage density. To squarely justify the contribution of fin and metal foam to phase change improvement, smooth tube, finned tube and metal foam tube were examined for comparison, as well. The thermal performance of the four thermal energy storage units were evaluated by numerical models that was validated by comparison with experimental results. Based on the smooth tube, the complete melting/solidification time significantly decreased by 85.83% and 95.83%, and the average heat flux increased by 655.09% and 1834.61%, and the mean Nusselt number greatly increased by 795.93% and 4731.99%, at an inlet velocity of 0.15 m/s for heat transfer fluid. In addition, the charging/discharging capacity of the four thermal energy storage units can be significantly enhanced by increasing the flow rate. The proposed novel finned shell-and-tube thermal energy storage unit filled with metal foam outperformed other competing heat transfer structures, favoring the potentials for further advances in thermal energy storage applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Latent Heat Thermal Energy Storage Systems with Solid–Liquid Phase Change Materials: A Review
Zhang, N., Yuan, Y., Cao, X., Du, Y., Zhang, Z., & Gui, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700753 · Cited by 504
Role of porous metal foam on the heat transfer enhancement for a thermal energy storage tube
Yang, X., Yu, J., Guo, Z., Jin, L., & He, Y.-L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.075 · Cited by 257
Self-citation
Cited by
Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit
Yang, X., Guo, J., Yang, B., Cheng, H., Wei, P., & He, Y.-L. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115772 · Cited by 309
Self-citationSenobar, H., Aramesh, M., & Shabani, B. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101911 · Cited by 111
Khatibi, M., Nemati-Farouji, R., Taheri, A., Kazemian, A., Ma, T., & Niazmand, H. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.102055 · Cited by 84
Effect of geometric parameter and nanoparticles on PCM melting in a vertical shell-tube system
Nie, C., Liu, J., & Deng, S. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116290 · Cited by 75
Metadata
- Authors
- Yang, X., Yu, J., Xiao, T., Hu, Z., & He, Y.-L.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 261
- Pages
- 114385
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2996936554
- Cited by
- 182
- References
- 2
- FWCI
- 14.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design and operating evaluation of a finned shell-and-tube thermal energy storage unit filled with metal foam. https://app.cochat.ai/papers/10.1016/j.apenergy.2019.114385
- The paper
- Yang, X., Yu, J., Xiao, T., Hu, Z., & He, Y.-L. (2020). Design and operating evaluation of a finned shell-and-tube thermal energy storage unit filled with metal foam. Applied Energy. https://doi.org/10.1016/j.apenergy.2019.114385
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.