The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
A coupled discrete droplet and SPH model for predicting spray impingement onto surfaces and into fluid pools
Open accessAbstract
Abstract In this paper we detail the development of a combined DEM-SPH model for spray impingement into a pool of water or onto a flat surface on which a pool of water can build up. The spray is represented by discrete particles which can collide with solid objects, each other and also merge with liquid surfaces. The liquid pool dynamics are solved for using the SPH method. The proposed coupling allows momentum to be transferred from the discrete spray phase into the fluid phase in the pool. The performance of this coupled DEM-SPH method is evaluated by comparing to experiments performed for simple spray arrangements in which the pressure in the pool just above the solid surface is carefully measured by a probe that is moved systematically across the surface. A comparison of the simulated pressure distribution with those from the experiments shows very good agreement for the size of the high pressure region, the average pressure the pressure distribution within this region generated by the spray impingement for cases with one, two and three overlapping sprays. Collisions between spray droplets in the case of multiple sprays are found to have a small but noticeable effect on the details of the high pressures in the regions of overlap of the sprays.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Cleary et al. [37] employed the DEM method to solve the discrete problem with excellent results.”
From Cold Spray Process for Co-Deposition of Copper and Aluminum Particles (2023) · cites this paper as [37]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Smoothed particle hydrodynamics: theory and application to non-spherical stars
Gingold, R. A., & Monaghan, J. J. (1977) · Monthly Notices of the Royal Astronomical Society · doi:10.1093/mnras/181.3.375 · Cited by 7,388
Simulating Free Surface Flows with SPH
Monaghan, J. J. (1994) · Journal of Computational Physics · doi:10.1006/jcph.1994.1034 · Cited by 3,388
Smoothed particle hydrodynamics
Monaghan, J. J. (2005) · Reports on Progress in Physics · doi:10.1088/0034-4885/68/8/r01 · Cited by 2,754
Spray cooling heat transfer: The state of the art
Kim, J. (2006) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2006.09.003 · Cited by 984
Development of Methodology for Spray Impingement Simulation
Bai, C., & Gosman, A. D. (1995) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/950283 · Cited by 570
Moreira, A. L. N., Moita, A., & Panão, M. R. O. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.01.002 · Cited by 566
Computer simulation of granular shear flows
Campbell, C. S., & Brennen, C. E. (1985) · Journal of Fluid Mechanics · doi:10.1017/s002211208500091x · Cited by 388
Large scale industrial DEM modelling
Cleary, P. W. (2004) · Engineering Computations · doi:10.1108/02644400410519730 · Cited by 348
Self-citationModelling confined multi-material heat and mass flows using SPH
Cleary, P. W. (1998) · Applied Mathematical Modelling · doi:10.1016/s0307-904x(98)10031-8 · Cited by 323
Self-citation
Research works printed but not linked: 2
- Cleary, 2009, Industrial particle flow modelling using DEM, Eng. Compos., 26, 698
- Hewitt, 1998, Boiling, Chapter 15 in: Handbook of Heat Transfer
Cited by
Cold Spray Process for Co-Deposition of Copper and Aluminum Particles
Hu, S., Li, H., Zhang, L., & Xu, Y. (2023) · Coatings · doi:10.3390/coatings13111953 · Cited by 3
Metadata
- Authors
- Cleary, P. W., & Serizawa, Y.
- Affiliations
- Commonwealth Scientific and Industrial Research Organisation (AU)
- Nippon Steel (Japan) (JP)
- Corresponding author
- Cleary, Paul W.
- Venue
- Applied Mathematical Modelling
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 69
- Pages
- 301-329
- ISSN
- 0307-904X (ISSN-L)
- OpenAlex
- W2907677324
- Cited by
- 13
- References
- 52
- Citations by year
- 2026: 1 · 2024: 2 · 2023: 2 · 2022: 1 · 2021: 6 · 2020: 1
- FWCI
- 1.29
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- www.elsevier.com/open-access/userlicense/1.0/ (vor, 1461 d)
- doi.org/10.15223/policy-017 (stm-asf)
- doi.org/10.15223/policy-037 (stm-asf)
- doi.org/10.15223/policy-012 (stm-asf)
- doi.org/10.15223/policy-029 (stm-asf)
- doi.org/10.15223/policy-004 (stm-asf)
- Locations
- Applied Mathematical Modelling (publishedVersion)
- Topics
- Physical Sciences › Engineering › Computational Mechanics › Fluid Dynamics Simulations and Interactions
- Physical Sciences › Engineering › Computational Mechanics › Fluid Dynamics and Heat Transfer
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Particle Dynamics in Fluid Flows
- Keywords
- spray impingement, discrete element method, smoothed particle hydrodynamics, droplet collision, droplet coalescence, surface pressure distribution
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A coupled discrete droplet and SPH model for predicting spray impingement onto surfaces and into fluid pools. https://app.cochat.ai/papers/10.1016/j.apm.2018.12.024
- The paper
- Cleary, P. W., & Serizawa, Y. (2019). A coupled discrete droplet and SPH model for predicting spray impingement onto surfaces and into fluid pools. Applied Mathematical Modelling. https://doi.org/10.1016/j.apm.2018.12.024
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
