The DOI matches its Crossref record; 133 of the 133 references it cites were found in a registry or an index.
Understanding melt pool characteristics in laser powder bed fusion: An overview of single- and multi-track melt pools for process optimization
Open accessAbstract
Laser powder bed fusion (LPBF) has made significant progress in producing solid and porous metal parts with complex shapes and geometries. However, LPBF produced parts often have defects (e.g., porosity, residual stress, and incomplete melting) that hinder its large-scale industrial commercialization. The LPBF process involves complex heat transfer and fluid flow, and the melt pool is a critical component of the process. The melt pool stability is a critical factor in determining the microstructure, mechanical properties, and corrosion resistance of LPBF produced metal parts. Furthermore, optimizing process parameters for new materials and designed structures is challenging due to the complexity of the LPBF process. This requires numerous trial-and-error cycles to minimize defects and enhance properties. This review examines the behavior of the melt pool during the LPBF process, including its effects and formation mechanisms. This article summarizes the experimental results and simulations of melt pool and identifies various factors that influence its behavior, which facilitates a better understanding of the melt pool's behavior during LPBF. This review aims to highlight key aspects of the investigation of melt pool tracks and microstructural characterization, with the goal of enhancing a better understanding of the relationship between alloy powder-process-microstructure-properties in LPBF from both single- and multi-melt pool track perspectives. By identifying the challenges and opportunities in investigating single- and multi-melt pool tracks, this review could contribute to the advancement of LPBF processes, optimal process window, and quality optimization, which ultimately improves accuracy in process parameters and efficiency in qualifying alloy powders.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to Fluid Dynamics
Batchelor, G. K. (2000) · doi:10.1017/cbo9780511800955 · Cited by 12,360
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties
Pollock, T. M., & Tin, S. (2006) · Journal of Propulsion and Power · doi:10.2514/1.18239 · Cited by 2,581
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Metadata
- Authors
- Wang, J., Zhu, R., Liu, Y., & Zhang, L.
- Venue
- Advanced Powder Materials
- Publisher
- Elsevier BV
- Published
- 2023-10
- Volume
- 2
- Issue
- 4
- Pages
- 100137
- ISSN
- 2772-834X (ISSN-L)
- OpenAlex
- W4367625586
- Cited by
- 484
- References
- 133
- FWCI
- 47.60
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Understanding melt pool characteristics in laser powder bed fusion: An overview of single- and multi-track melt pools for process optimization. https://app.cochat.ai/papers/10.1016/j.apmate.2023.100137
- The paper
- Wang, J., Zhu, R., Liu, Y., & Zhang, L. (2023). Understanding melt pool characteristics in laser powder bed fusion: An overview of single- and multi-track melt pools for process optimization. Advanced Powder Materials. https://doi.org/10.1016/j.apmate.2023.100137
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.