The DOI matches its Crossref record; 133 of the 133 references it cites were found in a registry or an index.
Understanding melt pool characteristics in laser powder bed fusion: An overview of single- and multi-track melt pools for process optimization
Open accessAbstract
Laser powder bed fusion (LPBF) has made significant progress in producing solid and porous metal parts with complex shapes and geometries. However, LPBF produced parts often have defects (e.g., porosity, residual stress, and incomplete melting) that hinder its large-scale industrial commercialization. The LPBF process involves complex heat transfer and fluid flow, and the melt pool is a critical component of the process. The melt pool stability is a critical factor in determining the microstructure, mechanical properties, and corrosion resistance of LPBF produced metal parts. Furthermore, optimizing process parameters for new materials and designed structures is challenging due to the complexity of the LPBF process. This requires numerous trial-and-error cycles to minimize defects and enhance properties. This review examines the behavior of the melt pool during the LPBF process, including its effects and formation mechanisms. This article summarizes the experimental results and simulations of melt pool and identifies various factors that influence its behavior, which facilitates a better understanding of the melt pool's behavior during LPBF. This review aims to highlight key aspects of the investigation of melt pool tracks and microstructural characterization, with the goal of enhancing a better understanding of the relationship between alloy powder-process-microstructure-properties in LPBF from both single- and multi-melt pool track perspectives. By identifying the challenges and opportunities in investigating single- and multi-melt pool tracks, this review could contribute to the advancement of LPBF processes, optimal process window, and quality optimization, which ultimately improves accuracy in process parameters and efficiency in qualifying alloy powders.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to Fluid Dynamics
Batchelor, G. K. (2000) · doi:10.1017/cbo9780511800955 · Cited by 12,360
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties
Pollock, T. M., & Tin, S. (2006) · Journal of Propulsion and Power · doi:10.2514/1.18239 · Cited by 2,581
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Theory of microstructural development during rapid solidification
Kurz, W., Giovanola, B., & Trivedi, R. (1986) · Acta Metallurgica · doi:10.1016/0001-6160(86)90056-8 · Cited by 1,491
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Self-citationGu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Qiu, C., Panwisawas, C., Ward, R., Basoalto, H., Brooks, J. W., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.004 · Cited by 1,041
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Liverani, E., Toschi, S., Ceschini, L., & Fortunato, A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.05.042 · Cited by 990
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Yang, J., Yu, H., Yin, J., Gao, M. X., Wang, Z., & Zeng, X. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.06.117 · Cited by 913
Li, X., Ji, G., Chen, Z., Addad, A., Wu, Y. X., Wang, H., Vleugels, J., Humbeeck, J. V., & Kruth, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.062 · Cited by 893
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.01.009 · Cited by 858
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Leung, C. L. A., Marussi, S., Atwood, R. C., Towrie, M., Withers, P. J., & Lee, P. D. (2018) · Nature Communications · doi:10.1038/s41467-018-03734-7 · Cited by 817
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Self-citationBalling behavior of stainless steel and nickel powder during selective laser melting process
Li, R., Liu, J., Shi, Y., Wang, L., & Jiang, W. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3566-1 · Cited by 722
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Self-citationHarrison, N. J., Todd, I., & Mumtaz, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.035 · Cited by 690
3D printing in aerospace and its long-term sustainability
Joshi, S. C., & Sheikh, A. A. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1111519 · Cited by 628
Yan, C., Hao, L., Hussein, A., Young, P., & Raymont, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.10.027 · Cited by 622
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Self-citationLu, Y., Wu, S., Gan, Y., Huang, T., Yang, C., Junjie, L., & Lin, J. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2015.07.009 · Cited by 600
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Self-citationYu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.006 · Cited by 586
Attar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Self-citationLiu, Y. J., Li, S. J., Wang, H. L., Hou, W. T., Hao, Y. L., Yang, R., Sercombe, T. B., & Zhang, L. C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.029 · Cited by 584
Self-citationDirect selective laser sintering of metals
Agarwala, M., Bourell, D., Beaman, J., Marcus, H., & Barlow, J. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510078113 · Cited by 571
Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
Dai, N., Zhang, L.-C., Zhang, J., Chen, Q., & Wu, M. (2016) · Corrosion Science · doi:10.1016/j.corsci.2015.10.041 · Cited by 570
Self-citationZhang, H., Zhu, H., Qi, T., Hu, Z., & Zeng, X. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.12.101 · Cited by 565
Fluid and particle dynamics in laser powder bed fusion
Bidare, P., Bitharas, I., Ward, R. M., Attallah, M. M., & Moore, A. J. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.051 · Cited by 555
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.018 · Cited by 553
Suryawanshi, J., Prashanth, K. G., Scudino, S., Eckert, J., Prakash, O., & Ramamurty, U. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.009 · Cited by 549
Ly, S., Rubenchik, A. M., Khairallah, S. A., Guss, G. M., & Matthews, M. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-04237-z · Cited by 521
Lee, Y., & Zhang, W. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.05.003 · Cited by 514
Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
Facchini, L., Magalini, E., Robotti, P., Molinari, A., Höges, S., & Wissenbach, K. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011083371 · Cited by 512
Trapp, J., Rubenchik, A. M., Guss, G., & Matthews, M. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.08.006 · Cited by 509
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Zhang, L., Liu, Y., Li, S., & Hao, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700842 · Cited by 486
Self-citationLi, R., Shi, Y., Wang, Z., Wang, L., Liu, J., & Jiang, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.02.030 · Cited by 473
Yadroitsev, I., Krakhmalev, P., Yadroitsava, I., Johansson, S., & Smurov, I. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.014 · Cited by 471
Keller, T., Lindwall, G., Ghosh, S., Ma, L., Lane, B. M., Zhang, F., Kattner, U. R., Lass, E. A., Heigel, J. C., Idell, Y., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.003 · Cited by 457
Effect of molten pool boundaries on the mechanical properties of selective laser melting parts
Shifeng, W., Shuai, L., Qingsong, W., Yan, C., Sheng, Z., & Yusheng, S. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.002 · Cited by 449
Sun, S.-H., Ishimoto, T., Hagihara, K., Tsutsumi, Y., Hanawa, T., & Nakano, T. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.09.017 · Cited by 441
Physical Aspects of Process Control in Selective Laser Sintering of Metals
Das, S. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310099 · Cited by 434
Sing, S. L., Yeong, W. Y., & Wiria, F. E. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.141 · Cited by 414
Processing AlSi10Mg by selective laser melting: Parameter optimisation and material characterisation
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000702 · Cited by 410
Tan, J. H., Wong, W. L. E., & Dalgarno, K. W. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.011 · Cited by 407
Balling phenomena in selective laser melted tungsten
Zhou, X., Liu, X., Zhang, D., Shen, Z., & Liu, W. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.032 · Cited by 399
On the Texture Formation of Selective Laser Melted Ti-6Al-4V
Simonelli, M., Tse, Y. Y., & Tuck, C. J. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2218-0 · Cited by 391
Qiu, C., Yue, S., Adkins, N. J. E., Ward, M., Hassanin, H., Lee, P. D., Withers, P. J., & Attallah, M. M. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.031 · Cited by 385
A review of powder additive manufacturing processes for metallic biomaterials
Harun, W. S. W., Kamariah, M. S. I. N., Muhamad, N., Ghani, S. A. C., Ahmad, F., & Mohamed, Z. (2018) · Powder Technology · doi:10.1016/j.powtec.2017.12.058 · Cited by 379
Calculation of laser absorption by metal powders in additive manufacturing
Boley, C. D., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Optics · doi:10.1364/ao.54.002477 · Cited by 371
Liu, Y. J., Wang, H. L., Li, S. J., Wang, S. G., Wang, W. J., Hou, W. T., Hao, Y. L., Yang, R., & Zhang, L. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.052 · Cited by 368
Self-citationGradient in microstructure and mechanical property of selective laser melted AlSi10Mg
Liu, Y., Liu, Z., Jiang, Y., Wang, G. W., Yang, Y., & Zhang, L. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.020 · Cited by 352
Self-citationYang, J., Han, J. C., Yu, H., Yin, J., Gao, M. X., Wang, Z., & Zeng, X. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.036 · Cited by 346
Yuan, P., & Gu, D. (2015) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/48/3/035303 · Cited by 345
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
Sallica-Leva, E., Jardini, A. L., & Fogagnolo, J. B. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.05.011 · Cited by 340
Aboulkhair, N. T., Maskery, I., Tuck, C., Ashcroft, I., & Everitt, N. M. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.11.016 · Cited by 329
Fundamental consolidation mechanisms during selective beam melting of powders
Körner, C., Bauereiß, A., & Attar, E. (2013) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/21/8/085011 · Cited by 323
Maskery, I., Aboulkhair, N. T., Corfield, M. R., Tuck, C., Clare, A. T., Leach, R. K., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.12.001 · Cited by 317
Heat transfer modelling and stability analysis of selective laser melting
Gusarov, A. V., Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.074 · Cited by 314
Röttger, A., Geenen, K., Windmann, M., Binner, F., & Theisen, W. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.10.012 · Cited by 310
Wei, P., Wei, Z., Chen, Z., Du, J., He, Y., Li, J., & Zhou, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.02.215 · Cited by 307
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Uzan, N. E., Shneck, R., Yeheskel, O., & Frage, N. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.08.027 · Cited by 302
Selective laser melting of Invar 36: Microstructure and properties
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.020 · Cited by 292
Gu, D., Wang, H., Dai, D., Yuan, P., Meiners, W., & Poprawe, R. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.10.011 · Cited by 279
The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
Wang, X. J., Zhang, L., Fang, M., & Sercombe, T. B. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.012 · Cited by 277
Self-citationSaboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P. (2020) · Applied Sciences · doi:10.3390/app10093310 · Cited by 275
Distributed Optimization for Linear Multiagent Systems: Edge- and Node-Based Adaptive Designs
Zhao, Y., Liu, Y., Wen, G., & Chen, G. (2017) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2017.2669321 · Cited by 270
Self-citationCai, C., Wu, X., Liu, W., Zhu, W., Chen, H., Qiu, J. C. D., Sun, C.-N., Liu, J., Wei, Q., & Shi, Y. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.05.004 · Cited by 260
Mukherjee, T., Wei, H. L., De, A., & DebRoy, T. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.04.027 · Cited by 259
Peritectic titanium alloys for 3D printing
Barriobero-Vila, P., Gussone, J., Stark, A., Schell, N., Haubrich, J., & Requena, G. (2018) · Nature Communications · doi:10.1038/s41467-018-05819-9 · Cited by 257
Zhang, L.-C., Chen, L.-Y., & Wang, L. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202070017 · Cited by 257
Self-citationAlMangour, B., Grzesiak, D., Borkar, T., & Yang, J.-M. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.039 · Cited by 246
Zhao, S., Li, S. J., Wang, S. G., Hou, W. T., Li, Y., Zhang, L. C., Hao, Y. L., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.060 · Cited by 239
Self-citationEffects of processing parameters on consolidation and microstructure of W–Cu components by DMLS
Gu, D., & Shen, Y. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.05.065 · Cited by 224
Microstructure and tensile properties of iron parts fabricated by selective laser melting
Song, B., Dong, S., Deng, S., Liao, H., & Coddet, C. (2014) · Optics & Laser Technology · doi:10.1016/j.optlastec.2013.09.017 · Cited by 219
3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT
Zhou, X., Wang, D., Liu, X., Zhang, D., Qu, S., Ma, J., London, G., Shen, Z., & Liu, W. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.014 · Cited by 216
Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
Di, W., Yongqiang, Y., Xubin, S., & Yonghua, C. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3443-y · Cited by 213
Chang, F., Gu, D., Dai, D., & Yuan, P. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.04.029 · Cited by 210
Yang, T., Liu, T., Liao, W., MacDonald, E. W., Wei, H., Chen, X., & Jiang, L. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.10.015 · Cited by 210
Wang, J. C., Liu, Y. J., Qin, P., Liang, S. X., Sercombe, T. B., & Zhang, L. C. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.06.001 · Cited by 208
Self-citationCorrosion Behaviour of Selective Laser Melted Ti-TiB Biocomposite in Simulated Body Fluid
Chen, Y., Zhang, J., Dai, N., Qin, P., Attar, H., & Zhang, L.-C. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.02.112 · Cited by 207
Self-citationOn the use of spatter signature for in-situ monitoring of Laser Powder Bed Fusion
Repossini, G., Laguzza, V., Grasso, M., & Colosimo, B. M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.004 · Cited by 206
Spatter formation in selective laser melting process using multi-laser technology
Andani, M. T., Dehghani, R., Karamooz-Ravari, M. R., Mirzaeifar, R., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.040 · Cited by 203
Pang, S., Chen, X., Zhou, J., et al. (2015) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2015.05.003 · Cited by 201
Ahmadi, A., Mirzaeifar, R., Moghaddam, N. S., Turabi, A. S., Karaca, H. E., & Elahinia, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.09.043 · Cited by 199
Mussatto, A., Groarke, R., O’Neill, A., Obeidi, M. A., Delaure, Y., & Brabazon, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101807 · Cited by 199
Effect of Fluid Convection on Dendrite Arm Spacing in Laser Deposition
Lee, Y., Nordin, M., Babu, S. S., & Farson, D. F. (2014) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-014-0054-7 · Cited by 196
Wang, Q., Han, C., Choma, T., Wei, Q., Yan, C., Song, B., & Shi, Y. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.026 · Cited by 194
Darvish, K., Chen, Z. W., & Pasang, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.09.086 · Cited by 193
Müller, A. V., Schlick, G., Neu, R., Anstätt, C., Klimkait, T., Lee, J., Pascher, B., Schmitt, M., & Seidel, C. (2019) · Nuclear Materials and Energy · doi:10.1016/j.nme.2019.02.034 · Cited by 189
Selective laser melting of aluminium and aluminium metal matrix composites: review
Sercombe, T. B., & Li, X. (2015) · Materials Technology · doi:10.1179/1753555715y.0000000078 · Cited by 188
Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring
Craeghs, T., Clijsters, S., Yasa, E., Bechmann, F., Berumen, S., & Kruth, J.-P. (2011) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2011.06.016 · Cited by 187
AlMangour, B., Grzesiak, D., & Yang, J.-M. (2017) · Powder Technology · doi:10.1016/j.powtec.2016.12.073 · Cited by 176
Dadbakhsh, S., & Hao, L. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.06.097 · Cited by 163
Dai, D., & Gu, D. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.07.044 · Cited by 147
Rochus, P., Plesseria, J.-Y., Van Elsen, M., Kruth, J.-P., Carrus, R., & Dormal, T. (2007) · Acta Astronautica · doi:10.1016/j.actaastro.2007.01.004 · Cited by 141
Attar, H., Bönisch, M., Calin, M., Zhang, L., Zhuravleva, K., Funk, A., Scudino, S., Yang, C. Q., & Eckert, J. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.122 · Cited by 139
Self-citationAlrbaey, K., Wimpenny, D. I., Tosi, R., Manning, W. J., & Moroz, A. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0993-9 · Cited by 136
Shi, X., Ma, S., Liu, C., & Wu, Q. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.11.002 · Cited by 130
Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Qin, P., Liu, Y., Sercombe, T. B., Li, Y., Zhang, C., Cao, C., Sun, H., & Zhang, L. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00319 · Cited by 128
Self-citationDense Pure Tungsten Fabricated by Selective Laser Melting
Wang, D., Yu, C., Zhou, X., et al. (2017) · Applied Sciences · doi:10.3390/app7040430 · Cited by 117
Guo, M., Gu, D., Xi, L., Du, L., Zhang, H., & Zhang, J. (2018) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2018.11.003 · Cited by 115
3D Printing: An Industrial Revolution
Prince, J. D. (2014) · Journal of Electronic Resources in Medical Libraries · doi:10.1080/15424065.2014.877247 · Cited by 112
Pang, S., Chen, W., Zhou, J., & Liao, D. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.11.013 · Cited by 110
Hafeez, N., Liu, S., Lu, E., Wang, L., Liu, R., Lü, W., & Zhang, L. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.03.138 · Cited by 109
Self-citationWang, J., Liu, Y., Liang, S., Zhang, Y., Wang, L., Sercombe, T. B., & Zhang, L. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.07.021 · Cited by 109
Self-citationDeprez, K., Vandenberghe, S., Audenhaege, K. V., et al. (2012) · Medical Physics · doi:10.1118/1.4769122 · Cited by 104
Valles, G., Panizo-Laiz, M., González, C., Martin‐Bragado, I., González-Arrabal, R., Gordillo, N., Iglesias, R., Guerrero, C. L., Perlado, J. M., & Rivera, A. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.10.007 · Cited by 95
Combinatorial development of antibacterial Zr-Cu-Al-Ag thin film metallic glasses
Liu, Y., Padmanabhan, J., Cheung, B. H., Liu, J., Chen, Z., Scanley, B. E., Wesolowski, D., Pressley, M., Broadbridge, C. C., Altman, S., et al. (2016) · Scientific Reports · doi:10.1038/srep26950 · Cited by 94
Self-citationSuzuki, A., Nishida, R., Takata, N., Kobashi, M., & Kato, M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.04.018 · Cited by 90
High-strength silicon brass manufactured by selective laser melting
Yang, C. Q., Zhao, Y., Kang, L. M., Li, D. D., Zhang, W. W., & Zhang, L. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.09.011 · Cited by 88
Self-citationZhang, L., Chen, L., Zhou, S., & Luo, Z. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.168099 · Cited by 87
Self-citationThe investigation of plume and spatter signatures on melted states in selective laser melting
Ye, D., Zhu, K., Fuh, J. Y. H., Zhang, Y., & Soon, H. G. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.10.019 · Cited by 81
Liu, H., Yang, D., Jiang, Q., Jiang, Y., Yang, W., Liu, L., & Zhang, L. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.09.006 · Cited by 81
Self-citationCai, C., Guo, S., Li, B., Tian, Y., Qiu, J. C. D., Sun, C., Yan, C., Qi, H. J., & Zhou, K. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c14076 · Cited by 76
Cook, P., & Ritchie, D. (2023) · Optics & Laser Technology · doi:10.1016/j.optlastec.2023.109247 · Cited by 69
The potential of 3D printing in urological research and patient care
Colaco, M. A., Igel, D. A., & Atala, A. (2018) · Nature Reviews Urology · doi:10.1038/nrurol.2018.6 · Cited by 59
Li, B., Jin, D., Sun, Y., Zhang, S., & Zhang, Q. (2022) · Optics & Laser Technology · doi:10.1016/j.optlastec.2022.108806 · Cited by 47
Melt pool dynamics and pores formation in multi-track studies in laser powder bed fusion process
Li, E., Zhou, Z., Wang, L., Zheng, Q., Zou, R., & Yu, A. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117533 · Cited by 37
Liu, Y. J., Zhang, J., Liu, X. C., Wu, X. G., Wang, J., Zhang, Y., Wang, L. Q., & Zhang, L. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.141696 · Cited by 32
Self-citation
Metadata
- Authors
- Wang, J., Zhu, R., Liu, Y., & Zhang, L.
- Venue
- Advanced Powder Materials
- Publisher
- Elsevier BV
- Published
- 2023-10
- Volume
- 2
- Issue
- 4
- Pages
- 100137
- ISSN
- 2772-834X (ISSN-L)
- OpenAlex
- W4367625586
- Cited by
- 484
- References
- 133
- FWCI
- 47.60
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.