The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
A digital twin for rapid qualification of 3D printed metallic components
Open accessAbstract
The customized production of complex components by 3D printing has been hailed as a potentially transformative tool in manufacturing with important applications in health care, automotive and aerospace industries. However, after about a quarter of a century of research and development, only a handful of commercial alloys can be printed and the market value of all 3D printed products now amounts to a negligible portion of the manufacturing economy. This difficulty is attributable to a remarkable diversity in structure and properties of the printed components and susceptibility to defects. In addition, the current practice of qualifying components by prolonged trial and error with expensive printing equipment and feed stock material confine the printed products to a niche market where the high product cost and the delay in the qualification are not critical factors. Here we explain how a digital twin or a digital replica of the printing machine will reduce the number of trial and error tests to obtain desired product attributes and reduce the time required for part qualification to make the printed components cost effective. It is shown that a comprehensive digital twin of 3D printing machine consisting of mechanistic, control and statistical models of 3D printing, machine learning and big data can reduce the volume of trial and error testing, reduce defects and shorten time between the design and production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Self-citation3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Digital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Digital twin and big data towards smart manufacturing and Industry 4.0: 360 degree comparison
Qi, Q., & Tao, F. (2018) · IEEE Access · doi:10.1109/access.2018.2793265 · Cited by 1,716
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
Liu, L., Ding, Q., Zhong, Y., Zou, J., Wu, J., Chiu, Y.-L., Li, J., Zhang, Z., Yu, Q., & Shen, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2017.11.004 · Cited by 1,127
Recent advances and trends in predictive manufacturing systems in big data environment
Lee, J., Lapira, E., Bagheri, B., & Kao, H.-A. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.005 · Cited by 1,090
Alloy design for aircraft engines
Pollock, T. M. (2016) · Nature Materials · doi:10.1038/nmat4709 · Cited by 931
Wang, Z., Palmer, T. A., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.019 · Cited by 789
A strategy to apply machine learning to small datasets in materials science
Zhang, Y., & Ling, C. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0081-z · Cited by 776
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
Neural Networks in Materials Science.
Bhadeshia, H. K. D. H. (1999) · ISIJ International · doi:10.2355/isijinternational.39.966 · Cited by 681
Yadollahi, A., Shamsaei, N., Thompson, S. M., & Seely, D. W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.07.056 · Cited by 650
Evolution of solidification texture during additive manufacturing
Wei, H. L., Mazumder, J., & DebRoy, T. (2015) · Scientific Reports · doi:10.1038/srep16446 · Cited by 557
Self-citationPrintability of alloys for additive manufacturing
Mukherjee, T., Zuback, J. S., De, A., & DebRoy, T. (2016) · Scientific Reports · doi:10.1038/srep19717 · Cited by 523
Self-citationCharacterization of stainless steel parts by Laser Metal Deposition Shaping
Zhang, K., Wang, S., Liu, W., et al. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.09.006 · Cited by 462
Ma, M., Wang, Z., & Zeng, X. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.12.112 · Cited by 431
Sing, S. L., Yeong, W. Y., & Wiria, F. E. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.141 · Cited by 414
Building blocks for a digital twin of additive manufacturing
Knapp, G. L., Mukherjee, T., Zuback, J. S., Wei, H. L., Palmer, T. A., De, A., & DebRoy, T. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.039 · Cited by 414
Self-citationScipioni Bertoli, U., Guss, G., Wu, S., Matthews, M. J., & Schoenung, J. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.044 · Cited by 412
Chen, X., Li, J., Cheng, X., He, B., Wang, H., & Huang, Z. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.05.024 · Cited by 401
Part and material properties in selective laser melting of metals
Kruth, J., Badrossamay, M., Yasa, E., Deckers, J. P., Thijs, L., & Humbeeck, J. V. (2010) · Lirias · Cited by 303
Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.06.006 · Cited by 302
Manvatkar, V., De, A., & DebRoy, T. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000701 · Cited by 282
Self-citationBuilding digital twins of 3D printing machines
DebRoy, T., Zhang, W., Turner, J., & Babu, S. S. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.12.005 · Cited by 259
Self-citationMukherjee, T., Wei, H. L., De, A., & DebRoy, T. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.04.027 · Cited by 259
Self-citationOu, W., Mukherjee, T., Knapp, G. L., Wei, Y., & DebRoy, T. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.111 · Cited by 257
Self-citationMitigation of lack of fusion defects in powder bed fusion additive manufacturing
Mukherjee, T., & DebRoy, T. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.10.028 · Cited by 256
Self-citationGray, G. T., Livescu, V., Rigg, P. A., Trujillo, C. P., Cady, C. M., Chen, S. R., Carpenter, J. S., Lienert, T. J., & Fensin, S. J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.045 · Cited by 238
Mitigation of thermal distortion during additive manufacturing
Mukherjee, T., Manvatkar, V., De, A., et al. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.09.001 · Cited by 230
Self-citationLu, Q. Y., & Wong, C. H. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1351201 · Cited by 198
Dimensionless numbers in additive manufacturing
Mukherjee, T., Manvatkar, V., De, A., & DebRoy, T. (2017) · Journal of Applied Physics · doi:10.1063/1.4976006 · Cited by 196
Self-citationTransport phenomena during direct metal deposition
He, X. L., & Mazumder, J. (2007) · Journal of Applied Physics · doi:10.1063/1.2710780 · Cited by 191
Prabhakar, P., Sames, W. J., Dehoff, R., & Babu, S. S. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.03.003 · Cited by 185
Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2018.08.006 · Cited by 163
A comprehensive analytical model for laser powder-fed additive manufacturing
Huang, Y., Khamesee, M. B., & Toyserkani, E. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.07.001 · Cited by 133
Martukanitz, R. P., Michaleris, P., Palmer, T. A., DebRoy, T., Liu, Z., Otis, R., Heo, T. W., & Chen, L. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.09.002 · Cited by 123
Self-citationAdditive Manufacturing: Policy Needed
Roca, J. B., Vaishnav, P., Fuchs, E. R. H., & Morgan, M. G. (2016) · Nature Materials · doi:10.1038/nmat4658 · Cited by 90
Shuai, C., Xue, L., Gao, C., Yang, Y., Peng, S., & Zhang, Y. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1458991 · Cited by 76
Microstructure and tensile properties of Ti-Mo alloys manufactured via using laser powder bed fusion
Kang, N., Li, Y., Lin, X., Feng, E., & Huang, W. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.09.008 · Cited by 73
Mishra, S., & DebRoy, T. (2007) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.11.149 · Cited by 32
Self-citation
Cited by
Digital twin: values, challenges and enablers from a modeling perspective
Rasheed, A., San, O., & Kvamsdal, T. (2020) · IEEE Access · doi:10.1109/access.2020.2970143 · Cited by 1,952
Digital Twin Networks: A Survey
Wu, Y., Zhang, K., & Zhang, Y. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3079510 · Cited by 847
Digital Economy as a Factor in the Technological Development of the Mineral Sector
Litvinenko, V. S. (2020) · Natural Resources Research · doi:10.1007/s11053-019-09568-4 · Cited by 561
Scientific, technological and economic issues in metal printing and their solutions
DebRoy, T., Mukherjee, T., Milewski, J. O., Elmer, J. W., Ribic, B., Blecher, J. J., & Zhang, W. (2019) · Nature Materials · doi:10.1038/s41563-019-0408-2 · Cited by 543
Self-citationHeat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Metadata
- Authors
- Mukherjee, T., & DebRoy, T.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 14
- Pages
- 59-65
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W2900615132
- Cited by
- 339
- References
- 45
- FWCI
- 13.91
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.