The DOI matches its Crossref record.
Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality
Abstract
Abstract Selective laser melting (SLM) is a powder bed fusion additive manufacturing (AM) technique that produces three-dimensional (3D) parts by fusing metallic powders with a high-energy laser. SLM involves numerous process parameters that may influence the properties of the final parts. Hence, establishing the effect of the SLM processing parameters is important for producing parts of high quality. In this study, titanium-tantalum alloy was fabricated by SLM using a customized powder blend to achieve in situ alloying. The influence of processing parameters on the microstructure and properties such as relative density, microhardness and surface roughness was investigated. The results show that fully dense titanium-tantalum parts can be obtained from SLM. With laser power of 360 W, scan speed of 400 mm/s, powder layer thickness of 0.05 mm and hatch spacing of 0.125 mm, the titanium-tantalum alloy produced by SLM has relative density of 99.85 ± 0.18%. Despite the variation in process parameters, titanium-tantalum shows laminar β grains in random directions in both xy and yz-plane from optical microscope (OM) analysis in all the parts produced. This observation is further confirmed using x-ray diffraction (XRD).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Sanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Self-citationAdditive manufacturing of functionally graded materials: A review
Zhang, C., Chen, F., Huang, Z., Jia, M., Chen, G., Ye, Y., Lin, Y., Liu, W., Chen, B., Shen, Q., et al. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138209 · Cited by 612
The Potential of Additive Manufacturing in the Smart Factory Industrial 4.0: A Review
Mehrpouya, M., Dehghanghadikolaei, A., Fotovvati, B., Vosooghnia, A., Emamian, S. S., & Gisario, A. (2019) · Applied Sciences · doi:10.3390/app9183865 · Cited by 419
A digital twin for rapid qualification of 3D printed metallic components
Mukherjee, T., & DebRoy, T. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2018.11.003 · Cited by 339
Metadata
- Authors
- Sing, S. L., Wiria, F. E., & Yeong, W. Y.
- Venue
- International Journal of Refractory Metals and Hard Materials
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 77
- Pages
- 120-127
- ISSN
- 0263-4368 (ISSN-L)
- OpenAlex
- W2886652653
- Cited by
- 163
- References
- 0
- FWCI
- 14.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality. https://app.cochat.ai/papers/10.1016/j.ijrmhm.2018.08.006
- The paper
- Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018). Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality. International Journal of Refractory Metals and Hard Materials. https://doi.org/10.1016/j.ijrmhm.2018.08.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.