The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A versatile PDMS submicrobead/graphene oxide nanocomposite ink for the direct ink writing of wearable micron-scale tactile sensors
Open accessAbstract
Abstract Although direct ink writing (DIW) is a versatile 3D printing technique, progress in DIW has been constrained by the stringent rheological requirements for printable conductive nanocomposites, particularly at smaller length scales. In this work, we overcome these challenges using an aqueous nanocomposite ink with polydimethylsiloxane (PDMS) submicrobeads and an electrochemically derived graphene oxide (EGO) nanofiller. This nanocomposite ink possesses a thixotropic, self-supporting viscoelasticity. It can be easily extruded through very small nozzle openings (as small as 50 μm) allowing for the highest resolution PDMS DIW reported to date. With a mild thermal annealing, the DIW-printed device exhibits low resistivity (1660 Ω·cm) at a low percolation threshold of EGO (0.83 vol.%) owing to the unique nanocomposite structure of graphene-wrapped elastomeric beads. The nanocomposite ink was used to print wearable, macro-scale strain sensing patches, as well as remarkably small, micron-scale pressure sensors. The large-scale strain sensors have excellent performance over a large working range (up to 40% strain), with high gauge factor (20.3) and fast responsivity (83 ms), while the micron-scale pressure sensors demonstrated high pressure sensitivity (0.31 kPa−1) and operating range (0.248–500 kPa). Ultrahigh resolution, multi-material layer-by-layer deposition allows the engineering of microscale features into the devices, features which can be used to tune the piezoresistive mechanism and degree of piezoresistivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A wearable and highly sensitive pressure sensor with ultrathin gold nanowires
Gong, S., Schwalb, W., Wang, Y., Chen, Y., Tang, Y., Si, J., Shirinzadeh, B., & Cheng, W. (2014) · Nature Communications · doi:10.1038/ncomms4132 · Cited by 2,064
Cited by
Stretchable Electronics Based on PDMS Substrates
Qi, D., Zhang, K., Tian, G., Jiang, B., & Huang, Y. (2021) · Advanced Materials · doi:10.1002/adma.202003155 · Cited by 663
Wearable piezoresistive pressure sensors based on 3D graphene
Cao, M., Su, J., Fan, S., Qiu, H., Su, D., & Li, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126777 · Cited by 373
3D-printed sensors: Current progress and future challenges
Khosravani, M. R., & Reinicke, T. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.111916 · Cited by 331
3D Printing of Multilayered and Multimaterial Electronics: A Review
Goh, G. L., Zhang, H., Chong, T. H., & Yeong, W. Y. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100445 · Cited by 319
Printed aerogels: chemistry, processing, and applications
Feng, J., Su, B.-L., Xia, H., Zhao, S., Gao, C., Wang, L., Ogbeide, O., Feng, J., & Hasan, T. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00757a · Cited by 313
Metadata
- Authors
- Shi, G., Lowe, S. E., Teo, A. J. T., Dinh, T. K., Tan, S. H., Qin, J., Zhang, Y., Zhong, Y. L., & Zhao, H.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 16
- Pages
- 482-492
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W2966922659
- Cited by
- 170
- References
- 1
- FWCI
- 6.79
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A versatile PDMS submicrobead/graphene oxide nanocomposite ink for the direct ink writing of wearable micron-scale tactile sensors. https://app.cochat.ai/papers/10.1016/j.apmt.2019.06.016
- The paper
- Shi, G., Lowe, S. E., Teo, A. J. T., Dinh, T. K., Tan, S. H., Qin, J., Zhang, Y., Zhong, Y. L., & Zhao, H. (2019). A versatile PDMS submicrobead/graphene oxide nanocomposite ink for the direct ink writing of wearable micron-scale tactile sensors. Applied Materials Today. https://doi.org/10.1016/j.apmt.2019.06.016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.