Evolutionary design of a satellite thermal control system: Real experiments for a CubeSat mission
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
This paper studies the use of artificial evolution to automate the design of a satellite passive thermal control system. This type of adaptation often requires the use of computer simulations to evaluate fitness of a large number of candidate solutions. Simulations are required to be expedient and accurate so that solutions can be successfully transferred to reality. We explore a design process that involves three steps. On a first step candidate solutions (implemented as surface paint tiling patterns) are tested using a FEM model and ranked according to their quality to meet mission temperature requirements. On a second step the best individual is implemented as a real physical satellite mockup and tested inside a vacuum chamber, having light sources imitating the effect of solar light. On a third step the simulation model is adapted with data obtained during the real evaluation. These updated models can be further employed for continuing genetic search. Current differences between our simulation and our real physical setup are in the order of 1.45 K mean squared error for faces pointing toward the light source and 2.4 K mean squared errors for shadowed faces. We found that evolved tiling patterns can be 5 K below engineered patterns and 8 K below using unpainted aluminum satellite surfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Genetic Algorithms and Engineering Optimization
Gen, M., & Cheng, R. (1999) · doi:10.1002/9780470172261 · Cited by 2,548
Resilient Machines Through Continuous Self-Modeling
Bongard, J., Zykov, V., & Lipson, H. (2006) · Science · doi:10.1126/science.1133687 · Cited by 709
Cited by
Deep Reinforcement Learning Method for Satellite Range Scheduling Problem
Ou, J., Xing, L., Yao, F., Li, M., Lv, J., He, Y., Song, Y., Wu, J., & Zhang, G. (2023) · Swarm and Evolutionary Computation · doi:10.1016/j.swevo.2023.101233 · Cited by 91
Thermal analysis of the SMOG-1 PocketQube satellite
Kovács, R., & Józsa, V. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.05.020 · Cited by 50
“Note that advanced numerical approaches like genetic algorithm [15], differential evolution, or other metaheuristic Fig.”
BackgroundMorsch Filho, E., Nicolau, V. D. P., Paiva, K. V. D., & Possamai, T. S. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114859 · Cited by 17
Metadata
- Authors
- Escobar, E., Diaz, M., & Zagal, J. C.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2016-07
- Volume
- 105
- Pages
- 490-500
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2304685647
- Cited by
- 61
- References
- 2
- FWCI
- 4.86
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.