The DOI matches its Crossref record; 77 of the 77 references it cites were found in a registry or an index.
Review on solid-solid phase change materials for thermal energy storage: Molecular structure and thermal properties
Open accessOverview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The use of Thermal Energy Storage (TES) in the energy system allows to conserving energy, increase the overall efficiency of the systems by eliminating differences between supply and demand for energy [4]”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“Materials changing the solid-solid phase are characterised by high energy storage density and small volume changes.”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“The use of Thermal Energy Storage (TES) in the energy system allows to conserving energy, increase the overall efficiency of the systems by eliminating differences between supply and demand for energy [4]”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“In addition, they are not at risk of leakage and do not require encapsulation.”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“Thus, they are more likely to be used than solids and liquids [4].”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“The nucleation process begins depending on the cooling rate, the type of particles and the presence of impurities when the temperature drops below the phase transition temperature [4].”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“and additionally it was found that in the presence of air exhibit slow decomposition at temperatures above 500 K.”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“PCMs have the potential to store thermal energy, during phase change, at an nearly constant temperature”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“Organometallic SS-PCMs (solid-solid transition) are a group of layer perovskite organometallics.They have a crystalline structure in which organic and inorganic layers alternate [4].”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“In study [4], the SS-PCM organometallic transition was found to be chemically stable at moderately high temperatures, completely reversible after 1000 thermal cycles, with a small volume change of 5À10% during the transition”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“and they ensure a much higher density of thermal energy storage than sensible thermal energy storage material therefore are widely used to store latent heat [4,12].”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“Therefore, they are best suited for industrial plants to recover heat from hightemperature waste heat [4].”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“Inorganic solids PCM (SS-PCM) are able to store/release heat energy in the solid phase through one or a combination of energy storage techniques such as magnetic transformations, crystallographic structure transformations, orderÀdisorder transformations, transformations between amorphous structure and crystal structure”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“Organic molecules that are capable of reorganising supramolecular interactions, can theoretically experience highly exothermic solid-solid phase transitions based on temperature.”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
In the citing paper
“These are indicated to be made of extremely symmetrical and voluminous alcohols namely as neopentyl glycol (NPG), pentaerythritol (PE), trimethylol propane (TMP), and pentaglycine (PG) [4].”
From Latent thermal energy storage technologies and applications: A review (2020) · cites this paper as [4]
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2002) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,758
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Phase change materials for smart textiles – An overview
Mondal, S. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.08.009 · Cited by 1,179
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
Plastic crystals: A historical review
Timmermans, J. (1961) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(61)90076-2 · Cited by 850
Phase change materials and thermal energy storage for buildings
de Gracia, Á., & Cabeza, L. F. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.007 · Cited by 696
Micro-encapsulated phase-change materials integrated into construction materials
Schossig, P., Henning, H., Gschwander, S., & HAUSSMANN, T. (2005) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2005.01.017 · Cited by 606
Fundamental principles of polymeric materials
(2012) · Choice Reviews Online · doi:10.5860/choice.50-2091 · Cited by 492
Flagged first, then by citations
Research works printed but not linked: 4
- Lorsch, 1976, Thermal energy storage for heating and air conditioning, future energy production system, Heat Mass Transf. Process., 69
- A. Bascetincelik, H.O. Paksoy, H.H. Ozturk, Y. Demirel, Seasonal latent heat storage system for greenhouse heating, in: Phase Change Materials and Chemical Reactions for Thermal Energy Storage First Workshop, Adana Turkey, 1998.
- Sarı, 2012, Synthesis and thermal properties of poly(styrene-co-ally alcohol)-graft-stearic acid copolymers as novel solid–solid PCMs for thermal energy storage, Sol. Energy, 86, 2282, 10.1016/j.solener.2012.04.018 · DOI
- Wang, 2000, Heat storage performance of the binary systems neopentyl glycol/pentaerythritol and neopentyl glycol/trihydroxy methyl-aminomethane as solid–solid phase change materials, Energy Convers. Manage., 41, 129, 10.1016/S0196-8904(99)00097-7 · DOI
Cited by
Sorted by citations
Items 401–500 of 502
ISOTHERMAL COMPRESSION IN A LIQUID PISTON CYLINDER WITH DENDRITIC PCM INSERTS
Athadkar, M., & Lorente, S. (2026) · Proceeding of Second Thermal and Fluids Engineering Conference · doi:10.1615/tfec2026.mes.061335 · Cited by 1
Muhammad, A., Iorio, L., Campagnoli, E., Giaretto, V., Morciano, M., Chiavazzo, E., Quadrini, F., & Fasano, M. (2026) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2026.108265 · Cited by 1
Intrinsic latent heat of the metal-insulator transition in W-doped VO2
Kong, M., Cho, S., An, M., Jo, Y., Jang, D., & Ok, J. M. (2026) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2026.132824 · Cited by 1
Liang, C., Xing, H., Bao, D., Gao, Y., Chen, H., Ma, Z., Hou, S., Liu, W. V., & Zhou, Z. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.147236 · Cited by 1
Yadav, M. K., Srivastava, R., Sharma, T., & Trivedi, J. J. (2026) · Chemical Papers · doi:10.1007/s11696-026-05311-5 · Cited by 1
Today, Tomorrow, and the Future of Energy Storage Materials for Solar Energy
Ali, D., Kaya, M. F., & Şendoğdular, L. (2020) · Mühendis ve Makina · doi:10.46399/muhendismakina.797433 · Cited by 1
Desalination of sea water using solar still
Panuganti, L. (2022) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/982/1/012035 · Cited by 1
Zhang, T., Zhang, C., Xu, B., Ren, W., & Chen, Z. (2022) · Heat Transfer Research · doi:10.1615/heattransres.2022042108 · Cited by 1
Villegas-Méndez, J. R., Figueroa-Torres, M. Z., Guerra-Cossio, M., & Ruvalcaba-Ayala, F. R. (2022) · Revista de Ingeniería Civil · doi:10.35429/jce.2022.16.6.32.45 · Cited by 1
Sanz, L. F., González, J. A., Hevia, F., de la Fuenté, I. G., & Cobos, J. C. (2023) · Journal of Solution Chemistry · doi:10.1007/s10953-023-01310-2 · Cited by 1
Chen, H., Cheng, J., Wei, J., Feng, H., & Ran, L. (2023) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas58692.2023.10394817 · Cited by 1
Nayak, G., Maroliya, M., Qadeer, M., Midhun, V. C., Saha, S. K., & Subramaniam, C. (2024) · National and International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC) · doi:10.1615/ihmtc-2023.1590 · Cited by 1
(2024) · Journal of Chemical Biological and Physical Sciences · doi:10.24214/jcbps.c.14.3.20111 · Cited by 1
Cheng, Z., Zhang, J., Gao, Y., Li, Y., Zhu, J., & Chen, T. (2025) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2025.103566 · Cited by 1
Evaluation of Imidazolium Ionenes: Solid–Solid Phase Change Materials as Heat Sinks
Arriaza-Echanes, C., Krüger, G. I., Comesaña‐Gándara, B., Terraza, C. A., Sanhueza, L., & Ortiz, P. A. (2025) · Polymers · doi:10.3390/polym17131782 · Cited by 1
Designing Nature-Inspired Liquid-Repellent Surfaces
Stogin, B. B., Wang, L., & Wong, T. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.013 · Cited by 1
Bioinspired and Biomimetic Design of Multilayered and Multiscale Structures
Salifu, A. A., Mannoor, M. S., & Soboyejo, W. O. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.002 · Cited by 1
Piston-Type Optical Modulator for Dynamic Thermal Radiation Tuning Applications
Caratenuto, A., & Zheng, Y. (2021) · Materials · doi:10.3390/ma14164372 · Cited by 1
Kiaee, K., Jodat, Y. A., & Mannoor, M. S. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.008 · Cited by 1
eview on the general technical approaches as an effective ways to fabricate inorganic nanomaterials
(2020) · Journal of Chemical Biological and Physical Sciences · doi:10.24214/jcbps.a.10.3.33657
Polymer Composites for Thermal Energy Storage
Yang, J., Feng, C., Bai, L., Bao, R., Yang, M., & Yang, W. M. (2021) · Wiley eBooks · doi:10.1002/9781119719687.ch2 · Cited by 1
Exploring the Properties of User-defined Phase Change Materials for Thermal Energy Storage
Sevilla, L. T., & Radulović, J. (2020) · Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering · doi:10.11159/htff20.143
Bioinspired Building Envelopes
Dessel, S. V., Tao, M., & Granados-Fócil, S. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.015
Self-citationBioinspired Design of Multilayered Composites
Askarinejad, S., & Rahbar, N. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.004
Shan, W., & Shen, Y. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.014
Bioinspired Design of Nanostructures
Anuku, N., Obayemi, J. D., Odusanya, O. S., Malatesta, K. A., & Soboyejo, W. O. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.010
Human Cortical Bone as a Structural Material
Zimmermann, E. A., & Ritchie, R. O. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.003
Solar thermal and electricity. A state of the art
Hidalgo, D. B., & Hernández, A. B. (2020) · CIENCIA EN DESARROLLO · doi:10.19053/01217488.v11.n2.2020.10656
Bioinspired Design for Energy Storage Devices
Tadesse, L. F., & Abate, I. I. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.009
Bioinspired Design of Dental Functionally Graded Multilayer Structures
Du, J. H., Niu, X., & Soboyejo, W. O. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.007
A Study on Latent Thermal Energy Storage (LTES) using Phase Change Materials (PCMs) 2020
Dixit, R. (2021) · ScholarWorks@UMassAmherst (University of Massachusetts Amherst) · doi:10.7275/18400452
Ali, S. H., Eidan, A. A., Sahlani, A. A., & Hayder, A. M. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1058/1/012044
Sevilla, L. T., & Radulović, J. (2021) · Springer proceedings in energy · doi:10.1007/978-3-030-63916-7_4
A Short Review On Solar Stills Using Nano Phase Change Materials And Their Enhanced Properties
Sasilatha, T., Gopalakrishnan, S., Karthikeyan, V., & Elavarasi, R. (2021) · Int. J. of Aquatic Science
Jouhara, H. (2021) · Wiley eBooks · doi:10.1002/9783527830008.ch2
A Study on the Design of Vaccine Cooling Boxes for Remote and Border Areas
Rosyadi, I., Haryadi, H., & Satria, D. (2022) · Advances in engineering research/Advances in Engineering Research · doi:10.2991/aer.k.220131.063
Soboyejo, W. O., & Daniel, L. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.001
Кенжегазиновна, А. Ш., Frolova, S. A., Маратович, Ш. Р., Uali, A. S., Belgibayeva, D. S., & Kusepova, L. (2022) · International Journal of Sustainable Energy · doi:10.1080/14786451.2022.2051507
Soboyejo, W. O., & Daniel, L. (2020) · Cambridge University Press eBooks · doi:10.1017/9781139058995.016
Conjugated polymer and phase-change materials for energy storage and green buildings
Huseien, G. F., Shah, K. W., Yuan, J. C., & Quan, T. Z. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824094-6.00001-7
Latent Heat Thermal Storage of Solid-State Phase Transition in Thermally Stabilized Hexagonal FeSPreprint
Wang, X., Zhang, X., Tong, P., Yang, C., Si, J., Xiong, T., Dong, B., Xie, L., Pan, C., Wang, M., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4102461
Latent Heat Thermal Storage of Solid-State Phase Transition in Thermally Stabilized Hexagonal FeSPreprint
Wang, X., Zhang, X., Tong, P., Yang, C., Si, J., Xiong, T., Dong, B., Xie, L., Pan, C., Wang, M., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4102467
Application of nanomaterials to enhance the performance of wastewater treatment processes
Arkatkar, A., Chhatbar, M., Patel, A., Mungray, A. A., & Mungray, A. K. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-90564-0.00013-1
Analysis of Cascade Thermal Energy Storage System
Gupta, H., Verma, P., Dhiman, K., Chaudhary, P., & Khandelwal, N. (2022) · Lecture notes in mechanical engineering · doi:10.1007/978-981-19-3498-8_12
Comparative Heat Transfer Data for Solid-Liquid Phase Change of D-Mannitol and Adipic Acid
Horbatyuk, U., Magalhães, A., Ferreira, V. J., & Pinho, C. (2022) · Energy and Power Engineering · doi:10.4236/epe.2022.1411037
Zhang, T., & Chen, Z. (2023) · Environmental science and engineering · doi:10.1007/978-981-19-9822-5_108
Zhang, Y., Sun, J., Xiao, Q., Han, Y., Luo, X., & Zhang, L. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4659433
Introduction to Phase Change Materials
(2023) · Advances in chemical and materials engineering book series · doi:10.4018/979-8-3693-0932-2.ch006
Akhanda, M. S., Das, S. S., Lenox, M., Aronson, B., Fields, S., Bennett, S. P., Choi, J. W., Cho, J., Shivaram, B. S., Lee, S., et al. (2026) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-026-01830-9
Yufeng, Z. H. A. O., & Chen, Y. (2024) · Materials Science · doi:10.5755/j02.ms.36560
Heat capacities of solid and liquid phases
Harikrishnan, S., Ali, H. M., & Dhass, A. D. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13687-0.00005-9
Jin, Q., Sun, Q., & Long, X. (2024) · Annual Modeling and Simulation Conference (ANNSIM) · doi:10.23919/annsim61499.2024.10732173
Research Progress of High Mechanical Strength Phase Change Materials
朱, 浩. (2024) · Journal of Advances in Physical Chemistry · doi:10.12677/japc.2024.134071
Liu, Z., Babaei, M., Song, C., & Zhang, C. (2024) · Urban sustainability · doi:10.1007/978-981-97-8483-7_6
Applications of Predictive Modeling for Selected Properties of Polymers
Keshavarz, M. H. (2025) · Challenges and advances in computational chemistry and physics · doi:10.1007/978-3-031-78724-9_4
An introduction to thermal energy storage
Yang, X., Li, M., & Yan, J. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-16096-7.00001-x
Perovskite Materials for Efficient Utilization of Thermal Energy
Gaikwad, V. M., & Kakde, A. S. (2025) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.70029
Wang, Q., Jiang, B., Chen, D., Wang, L., & Yang, W. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c00322
Subramaniam, B. S. K., Dhas, S. S. J., Almansour, A. I., & Aswathappa, S. (2025) · Journal of Food Science and Technology · doi:10.1007/s13197-025-06341-9
Simulation Analysis of Press-Pack IGBT Modules with Embedded Phase Change Material
Li, D., Liao, Y., Zhong, X., Jiang, H., Zheng, X., & Liu, J. (2025) · IEEE International Conference on Power Science and Technology (ICPST) · doi:10.1109/icpst65050.2025.11089043
Study on the building energy analysis with the Phase changing Material
Christy, C. F., Lokesh, K., & Reddy, A. V. M. (2025) · Journal of Physics Conference Series · doi:10.1088/1742-6596/3047/1/012006
Time-dependent solid-state phase transition enables efficient latent heat storage in Ni1-Fe S
Wang, X., Bai, J., Zhang, X., Shen, X., Xia, Z., & Yu, H. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.183086
Influence of Phase Change Materials on Ice and Snow Melting Effects of Asphalt Mixture
Song, Y., & Liu, Y. (2025) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-19879
Oil-based phase change emulsions with reduced viscosity for thermal energy storage
Li, Q., Chen, Y., Mo, S., Yang, Z., Jia, L., Du, Y., & Chen, Y. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.119124
Largiller, G., Saad, A., Archinard, C., Weick, C., Pietri, T., Hernandez, O., & Devic, T. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5784372
Gong, Z., Liu, X., Liu, S., & Zhao, J. (2025) · Thermochimica Acta · doi:10.1016/j.tca.2025.180173
van Steen, E., Featherstone, N. S., & Callanan, L. H. (2026) · doi:10.1002/9783527849574.ch4
Arasteh, H., Maref, W., & Saber, H. H. (2026) · Lecture notes in civil engineering · doi:10.1007/978-3-032-14011-1_62
Alkan, C., Anayurt, R. A., Ensari, Ö. F., & Alakara, E. H. (2026) · Vietnam Journal of Chemistry · doi:10.1002/vjch.70135
Shape-stabilized phase change materials: solving the issue of leakage
Ismail, M. F., Lascelles, E., Arshad, A., & Landini, S. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-27484-8.00007-8
Phase change materials for thermal energy storage: classification, challenges, and advances
Bizualem, Y. D., Cui, X., Gu, X., Ren, G., Stagno, L. M., Xiong, T., Dong, K., & Ibrar, M. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-27484-8.00003-0
Davis, E. M., & Mukherjee, D. (2026) · RSC Advances · doi:10.1039/d5ra07897k
Wang, Z., Zhu, H., Zhang, H., García‐Salaberri, P. A., Wu, R., & Tao, Y. (2026) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2026.110781
Review on triple pipe heat exchanger with solid-solid thermal energy storage system
Hayder, S. H., Hussien, F. M., & Faraj, J. J. (2026) · AIP conference proceedings · doi:10.1063/5.0305828
Yadav, M. K., Singh, A., Abdullah, M. M. S., Hirani, H., Sharma, T., & Iglauer, S. (2026) · Energy Storage · doi:10.1002/est2.70388
Saad, A., Archinard, C., Weick, C., Pietri, T., Hernandez, O., Devic, T., & Largiller, G. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.121999
Rana, S., Quamer, A., & Pearce, J. M. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6592812
Barocaloric and magnetocaloric effects in the A-site layer-ordered double perovskite YBaCo 2 O 5.5
Ito, M., Goto, M., Iputera, K., & Shimakawa, Y. (2026) · Materials Advances · doi:10.1039/d6ma00234j
Maroliya, M., & Saha, S. K. (2026) · Energy Conversion and Management · doi:10.1016/j.enconman.2026.121556
Kargaran, M., Mousavi, S. B., Goshayeshi, H. R., & Khazaei, F. S. (2026) · Research Square · doi:10.21203/rs.3.rs-9560463/v1
Solving an inverse heat conduction problem with phase transitions using Tikhonov regularization
Ngendahayo, J. P., Froduald, M., Thim, J., & Berntsson, F. (2026) · Research in Mathematics · doi:10.1080/27684830.2026.2670816
Wang, Y., Guo, Y., Qu, F., Liu, B., Miao, Y., Deng, Z., Tiwari, R., & Li, W. (2026) · Intelligent Transportation Infrastructure · doi:10.1093/iti/liag007 · Cited by 1
Nieto‐Castro, D., Silva, A. N. A. D. A., da Silva, R. X., Pato‐Doldán, B., Abdellattef, A., Llamas-Saiz, A. L., & Gomez-Aguirre, L. C. (2026) · ACS Applied Energy Materials · doi:10.1021/acsaem.6c01047
Vitale, A., Chen, W., Staffolani, A., Marcaccio, M., Venuti, E., Salzillo, T., & D’Agostino, S. (2026) · Chemistry of Materials · doi:10.1021/acs.chemmater.6c00948
Gelpi, M., González-Novo, D., Alonso-Marañón, L., García‐Ben, J., Insua, Á. B., Zaragoza, S., Walker, J., McMonagle, C. J., Castro‐García, S., Señarı́s-Rodrı́guez, M. A., et al. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c07093
Bayad, I. J., & Jain, N. (2026) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2026.129184
Mirahmad, A., Kumar, R. S., Pato‐Doldán, B., & Díez-Sierra, J. (2026) · ACS Omega · doi:10.1021/acsomega.6c00060
Wang, X., Ge, C., Peng, C., Tong, S., Wang, Y., Zhang, Z., Tian, X., & Zhang, X. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c01947
Jayathunga, D., Karunathilake, H., Narayana, M., & Witharana, S. (2026) · Frontiers in Energy Research · doi:10.3389/fenrg.2026.1865512
García-Márquez, B., Partal, P., Navarro, F. J., Delgado-Sánchez, C., & Cuadri, A. A. (2026) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2026.104885
Alqawasmeh, Q. I., Fei, W., Narsilio, G. A., & Li, Z. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7300709
Vaca-Oviedo, A., Durán, M., Serrano, Á., Orue, A., Dauvergne, J., Arias, P. L., & del Barrio, E. P. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.124410
Artificial Intelligence in the Discovery and Design of Ionic Liquids for Thermal Energy Applications
Chhipa, P., Baird, Z. S., Abranches, D. O., & Järvik, O. (2026) · Journal of Chemical Information and Modeling · doi:10.1021/acs.jcim.6c02407 · Cited by 1
PCM-based photovoltaic thermal management: a comparative review
Ozdemir, Y., Aydın, H., & Kayri, İ. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.133283
Pan, Y., & Li, M. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.124890
Zhang, K., Bai, S., Zhang, Q., Zhao, Y., Li, X., Wang, T., Wei, J., Wang, X., & Wang, R. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.182845
Liu, X., Liu, H., 王周福, Liu, W., Xu, X., Tang, M., Lei, W., Ma, Y., & Wang, X. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.182937
Metadata
- Authors
- Fallahi, A., Guldentops, G., Tao, M., Granados-Focil, S., & Van Dessel, S.
- Affiliations
- Worcester Polytechnic Institute (US)
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2017-12
- Volume
- 127
- Pages
- 1427-1441
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2750691930
- Cited by
- 502
- References
- 77
- Citations by year
- 2026: 55 · 2025: 77 · 2024: 67 · 2023: 66 · 2022: 67 · 2021: 53 · 2020: 67 · 2019: 34 · 2018: 15 · 2017: 1
- FWCI
- 24.87
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- www.elsevier.com/open-access/userlicense/1.0/ (am, 278 d)
- doi.org/10.15223/policy-017 (stm-asf)
- doi.org/10.15223/policy-037 (stm-asf)
- doi.org/10.15223/policy-012 (stm-asf)
- doi.org/10.15223/policy-029 (stm-asf)
- doi.org/10.15223/policy-004 (stm-asf)
- Locations
- Applied Thermal Engineering (acceptedVersion)
- Clark Digital Commons (Clark University) (submittedVersion)
- Funders
- National Science Foundation (CMMI-1662903, 1662675)
- Directorate for Engineering, Division of Civil, Mechanical and Manufacturing Innovation (CMMI)
- Structural and Architectural Engineering and Materials program (SAEM)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- solid-solid phase change materials, thermal energy storage, molecular structure, thermal properties, phase transitions, structure-property relationships, latent heat storage
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
