CoChat

Experimental and numerical investigations of nano-additives enhanced paraffin in a shell-and-tube heat exchanger: A comparative study

Open access
Khan, Zakir, Ahmad Khan, Zulfiqar · 2018 · Applied Thermal Engineering
Cited by 102

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

The impact of metal oxides, metal nitrides and carbon allotropes based nano-additives on thermal conductivity and thermal storage performance of paraffin based latent heat storage (LHS) system is experimentally and numerically investigated. Aluminium oxide (Al2O3), aluminium nitride (AlN) and graphene nano-platelets (GnP) based nano-PCM were prepared with ultrasonic emulsification technique. Thermal performance enhancements of nano-PCM are investigated by conducting a series of charging and discharging experiments in shell-and-tube heat exchanger at various operating conditions. A numerical model is developed to account for an impact of varying operating temperature, nano-additives particle size and volume fraction on the effective thermal conductivity and dynamic viscosity of nano-PCM. The numerical model is simulated to investigate the influence of effective thermal conductivity and dynamic viscosity on heat transfer and temperature distribution, phase transition rate and total enthalpy of the system. It is noticed that the charging rates for Al2O3, AlN and GnP based nano-PCM are significantly enhanced by 28.01%, 36.47% and 44.57% as compared to pure paraffin, respectively. Likewise, the discharging rates are augmented by 14.63%, 34.95% and 41.46%, respectively. The addition of nano-additives compromises the overall thermal storage capacity and augments the effective dynamic viscosity which has an adverse impact on natural convection. Therefore, an optimum volume fraction of nano-additives is determined by conducting experimental examinations on Al2O3 based nano-PCM with volume fraction of 1%, 3% and 5%, at varied operating conditions. It is observed that by increasing volume fraction from 1% to 3%, the charging and discharging rates are significantly enhanced. However, an insignificant enhancement is noticed with further increase in volume fraction from 3% to 5%. Therefore, the optimum volume fraction of 3% is established. GnP based nano-PCM have demonstrated higher potential for thermal performance enhancement of LHS system and utilisation in both domestic and commercial clean energy applications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.applthermaleng.2018.07.141

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 102

Metadata

Authors
Khan, Z., & Ahmad Khan, Z.
Venue
Applied Thermal Engineering
Publisher
Elsevier BV
Published
2018-10
Volume
143
Pages
777-790
ISSN
1359-4311 (ISSN-L)
OpenAlex
W2885878532
Cited by
102
References
6
FWCI
5.92
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.