The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Investigation of the effect of inclination angle on the melting enhancement of phase change material in finned latent heat thermal storage units
Abstract
Abstract Large-scale deployment of Phase Change Materials (PCMs) based Latent Heat Thermal Storage (LHTS) systems is limited by the low charging and discharging rates of the PCMs. In this paper, the effect of the inclination angle of finned enclosures on the development of buoyancy-driven convection flows is investigated. 1-fin and 3-fin rectangular enclosures heated from one side are studied under different inclination angles varied from 0° to 180°. Transient numerical simulations using a control volume approach are carried out to obtain the phase fields, flow fields, temperature distributions, heat transfer rates, as well as thermal energy storages for different configurations. The results showed that the melting time reduces by decreasing the inclination angle of the enclosure due to the intensification of the natural convection flows and increase in the number of vortices in the liquid PCM. The maximum melting time reduction compared to the unfinned vertical enclosure is 72% obtained by the 0°-3-fin enclosure. There are critical liquid fractions beyond which heat transfer rates in the 1-fin enclosure surpass the 3-fin enclosure when the inclination angle of the former is less than the latter one. It was also found that the total heat content of the enclosures is increased by increasing the inclination angle of the enclosure and decreased by adding the number of fins.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zhang, X., Wen, R., Huang, Z., Tang, C., Huang, Y., Liu, Y., Fang, M., Wu, X., Min, X., & Xu, Y. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.05.037 · Cited by 189
Cited by
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020) · Energy · doi:10.1016/j.energy.2020.118698 · Cited by 444
Choudhari, V. G., Dhoble, A. S., & Panchal, S. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120434 · Cited by 383
Choudhari, V. G., Dhoble, D. A. S., & Sathe, T. M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101729 · Cited by 298
Nakhchi, M. E., Hatami, M., & Rahmati, M. (2021) · Energy · doi:10.1016/j.energy.2020.119112 · Cited by 78
Metadata
- Authors
- Karami, R., & Kamkari, B.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 146
- Pages
- 45-60
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2893391087
- Cited by
- 213
- References
- 1
- FWCI
- 7.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Investigation of the effect of inclination angle on the melting enhancement of phase change material in finned latent heat thermal storage units. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2018.09.105
- The paper
- Karami, R., & Kamkari, B. (2019). Investigation of the effect of inclination angle on the melting enhancement of phase change material in finned latent heat thermal storage units. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2018.09.105
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.