The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Charging nanoparticle enhanced bio-based PCM in open cell metallic foams: An experimental investigation
Abstract
In this paper, an experimental investigation is carried out to examine the melting process of nanoparticle enhanced phase change material (i.e., nano-PCM) inside a metal foam enclosure under constant heat flux boundary condition. Visualization experiments were carried out using a bio-based nano-PCM (i.e., copper oxide (CuO) nanoparticles dispersed in the bio-based coconut oil PCM) inside an open-cell metal foam. Rectangular blocks, made from aluminium metal foam of pore density of 5 PPI and porosities of 88%, 92%, and 96%, were considered. An experimental setup was constructed to track the evolution of the melting process and observe the transient variation in temperature. Temperatures were measured at selected locations inside the nano-PCM filled metal foam. Melt fraction was calculated by means of image analysis. Experimentally obtained images corresponding to the melting process of PCM, nano-PCM, PCM in metal foam, and nano-PCM in metal foam are presented for selected times and applied wall heat fluxes. Corresponding melt fractions and energy storage rates are calculated and presented as well. The results showed that utilizing both nanoparticles and metal foam increase the melting and energy storage rates. The results further show uniform melting for low porosity (88%) porous medium as heat is transferred primarily by conduction. For high porosity (96%) porous medium, non-uniform melting, e.g., more melting at the upper part compared to the lower part is observed as heat is transferred by convection at the upper part and by conduction at the lower part. Outcome of the current research can potentially be applied to latent heat thermal energy storage systems, hybrid-electric vehicles’ rechargeable prismatic-battery thermal management systems, and electronic cooling systems in remote locations. The melting process is enhanced by 1.2% when nanoparticles were added to the PCM; however, higher enhancement was observed, i. e. 41.2%, when the metal foam was embedded in the pure PCM at 1814 W/m2 and 2160 s. The energy stored rate accelerated by utilizing the metal foam in comparison with the pure PCM and the nano-PCM, i. e. 2.61% by adding nanoparticles and 28.81% by utilizing the metal foam at 2835 W/m2 and 2280 s.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ji, H., Sellan, D. P., Pettes, M. T., Kong, X., Ji, J., Shi, L., & Ruoff, R. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42573h · Cited by 592
Review of thermal energy storage technologies based on PCM application in buildings
Pomianowski, M., Heiselberg, P., & Zhang, Y. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.006 · Cited by 474
Harikrishnan, S., Deepak, K., & Kalaiselvam, S. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3472-x · Cited by 66
Cited by
Zhang, S., Feng, D., Shi, L., Wang, L., Jin, Y., Tian, L., Li, Z., Wang, G., Zhao, L., & Yan, Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110127 · Cited by 568
Thermophysical properties and applications of nano-enhanced PCMs: An update review
Yang, L., Huang, J.-N., & Zhou, F. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112876 · Cited by 343
Hybrid heat transfer enhancement for latent-heat thermal energy storage systems: A review
Mahdi, J. M., Lohrasbi, S., & Nsofor, E. C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.03.111 · Cited by 337
Mahdi, J. M., Mohammed, H. I., Hashim, E. T., Talebizadehsardari, P., & Nsofor, E. C. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.113993 · Cited by 323
Li, W. Q., Guo, S. J., Tan, L., Liu, L. L., & Ao, W. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120737 · Cited by 192
Metadata
- Authors
- Al-Jethelah, M., Ebadi, S., Venkateshwar, K., Tasnim, S. H., Mahmud, S., & Dutta, A.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 148
- Pages
- 1029-1042
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2903143220
- Cited by
- 181
- References
- 3
- FWCI
- 8.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Charging nanoparticle enhanced bio-based PCM in open cell metallic foams: An experimental investigation. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2018.11.121
- The paper
- Al-Jethelah, M., Ebadi, S., Venkateshwar, K., Tasnim, S. H., Mahmud, S., & Dutta, A. (2019). Charging nanoparticle enhanced bio-based PCM in open cell metallic foams: An experimental investigation. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2018.11.121
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.