Microstructural analysis and blowing agent concentration in aged polyurethane and polyisocyanurate foams

CRC handbook of chemistry and physics: a ready-reference book of chemical and physical data

(1991) · Choice Reviews Online · doi:10.5860/choice.29-0016 · Cited by 1,468 · see citing works

CRC handbook of chemistry and physics: a ready-reference book of chemical and physical data

(1995) · Choice Reviews Online · doi:10.5860/choice.32-3627 · Cited by 1,040 · see citing works

Szycher's Handbook of Polyurethanes

(2012) · CRC Press eBooks · doi:10.1201/b12343 · Cited by 613 · see citing works

Szycher's handbook of polyurethanes

(1999) · Choice Reviews Online · doi:10.5860/choice.37-1570 · Cited by 556 · see citing works

A Basic Study of Heat Transfer Through Foam Insulation

Schuetz, M. A., & Glicksman, L. R. (1984) · Journal of Cellular Plastics · doi:10.1177/0021955x8402000203 · Cited by 292 · see citing works

Experimental study of the thermal conductivity of polyurethane foams

Zhang, H., Fang, W., Li, Y., & Tao, W. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.12.057 · Cited by 251 · see citing works

The impact of the temperature dependent thermal conductivity of insulating materials on the effective building envelope performance

Berardi, U., & Naldi, M. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.03.052 · Cited by 207 · see citing works

Characterization of the cellular structure based on user-interactive image analysis procedures

Pinto, J., Solorzano, E., Rodríguez‐Pérez, M. Á., & de Saja, J. A. (2013) · Journal of Cellular Plastics · doi:10.1177/0021955x13503847 · Cited by 178 · see citing works

Effects of cell size and cell wall thickness variations on the stiffness of closed-cell foams

Chen, Y., Das, R. K., & Battley, M. (2014) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2014.09.022 · Cited by 166 · see citing works

Effects of cell shape and strut cross-sectional area variations on the elastic properties of three-dimensional open-cell foams

Li, K., Gao, X.-L., & Subhash, G. (2005) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2005.10.007 · Cited by 155 · see citing works

Numerical investigation on thermal insulation layer of a tunnel in seasonally frozen regions

Ma, Q., Luo, X., Lai, Y., Niu, F., & Gao, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.063 · Cited by 124 · see citing works

The impact of aging and environmental conditions on the effective thermal conductivity of several foam materials

Berardi, U. (2019) · Energy · doi:10.1016/j.energy.2019.06.022 · Cited by 122 · see citing works

Thermal Conductivity and Life of Polymer Foams

Norton, F. J. (1967) · Journal of Cellular Plastics · doi:10.1177/0021955x6700300101 · Cited by 111 · see citing works

Experimental study on composite insulation system of spray on foam insulation and variable density multilayer insulation

Zheng, J., Chen, L., Cui, C., Guo, J., Zhu, W., Zhou, Y., & Wang, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.11.050 · Cited by 77 · see citing works

The impact of changes in thermal conductivity of polystyrene insulation material under different operating temperatures on the heat transfer through the building envelope

Khoukhi, M., Fezzioui, N., Draoui, B., & Larbi, S. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.03.065 · Cited by 77 · see citing works

Preparation and characterization of granular silica aerogel/polyisocyanurate rigid foam composites

Zhao, C., Yan, Y., Hu, Z., Li, L.-P., & Fan, X. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.129 · Cited by 67 · see citing works

Aging of polyurethane foams

Ostrogorsky, A. G., Glicksman, L. R., & Reitz, D. W. (1986) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(86)90148-1 · Cited by 65 · see citing works

Diffusion of Gases in Polymeric Foams

Cuddihy, E. F., & MOACANIN, J. (1967) · Journal of Cellular Plastics · doi:10.1177/0021955x6700300202 · Cited by 35 · see citing works

A Method for Evaluating the Effect of Blowing Agent Condensation on Sprayed Polyurethane Foams

Kumaran, M. K., Bomberg, M. T., Marchand, R. G., Ascough, M. R., & Creazzo, J. A. (1989) · Journal of Thermal Insulation · doi:10.1177/109719638901300207 · Cited by 22 · see citing works

A Method for Analysing the Gas Phase in Polyurethane Foam

Svanström, M., & Ramnäs, O. (1995) · Journal of Cellular Plastics · doi:10.1177/0021955x9503100405 · Cited by 22 · see citing works

Vapor-Phase Thermal Conductivity, Vapor Pressure, and Liquid Density of R365mfc

Marrucho, I. M., Oliveira, N. S., & Dohrn, R. (2002) · Journal of Chemical & Engineering Data · doi:10.1021/je015534+ · Cited by 20 · see citing works

Simulation intricacies of open-cell metal foam fin subjected to convective flow

Dixit, T., & Ghosh, I. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.011 · Cited by 19 · see citing works

Image Analysis and the Characterization of Cellular Plastics

Schwartz, N. V., & Bomberg, M. T. (1991) · Journal of Thermal Insulation · doi:10.1177/109719639101500204 · Cited by 19 · see citing works

Thermal and mechanical optimization of nano-foams for sprayed insulation

Stazi, F., Urlietti, C., Perna, C. D., Chiappini, G., Rossi, M., & Tittarelli, F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.177 · Cited by 13 · see citing works

Diffusivity and Climatic Simulation of Hybrid Foams

Desai, A. A., Basbagill, J. P., Nutt, S., & Alonso, M. V. (2010) · Journal of Cellular Plastics · doi:10.1177/0021955x10373641 · Cited by 13 · see citing works

Five-Year Field Study Confirms Accelerated Thermal Aging Method for Polyisocyanurate Insulation

Christian, J. E., Desjarlais, A. O., Graves, R. S., & Smith, T. L. (1998) · Journal of Cellular Plastics · doi:10.1177/0021955x9803400103 · Cited by 13 · see citing works

Contribution to the gas chromatographic analysis for both refrigerants composition and cell gas in insulating foams – Part II: Aging of insulating foams

Macchi-Tejeda, H., Opatovà, H., & Guilpart, J. (2006) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2006.04.004 · Cited by 11 · see citing works

Effective Diffusion Coefficients of CO2 and HCFC-22 in Polyurethane and Polyisocyanurate Foams

Bhattacharjee, D., & Booth, J. R. (1995) · Journal of Cellular Plastics · doi:10.1177/0021955x9503100305 · Cited by 9 · see citing works

Effect of Time and Temperature on R-Value of Rigid Polyurethane Foam Insulation Manufactured with Alternative Blowing Agents

Bomberg, M. T., Kumaran, M. K., Ascough, M. R., & Sylvester, R. G. (1991) · Journal of Thermal Insulation · doi:10.1177/109719639101400306 · Cited by 9 · see citing works

Contribution to the gas chromatographic analysis for both refrigerants composition and cell gas in insulating foams – Part I: Method

Macchi-Tejeda, H., Opatovà, H., & Leducq, D. (2006) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2006.04.003 · Cited by 8 · see citing works

Effects of Humidity and Elevated Temperature on the Density and Thermal Conductivity of a Rigid Polyisocyanurate Foam

Zarr, R. R., & Nguyen, T. (1994) · Journal of Cellular Plastics · doi:10.1177/0021955x9403000408 · Cited by 7 · see citing works

Determination of the Blowing Agent Distribution in Rigid Polyurethane Foam

Svanström, M., & Ramnäs, O. (1996) · Journal of Cellular Plastics · doi:10.1177/0021955x9603200204 · Cited by 6 · see citing works

Some Laboratory Studies On the Use of Polyurethane Rigid Foam as a Thermal Insulation Material in Low Temperature Service

Hilado, C. J. (1977) · Journal of Thermal Insulation · doi:10.1177/109719637700100103 · Cited by 5 · see citing works

Classical Theory of Diffusion and Seepage Problems in Porous Media

Ichikawa, Y., & Selvadurai, A. P. S. (2011) · Springer eBooks · doi:10.1007/978-3-642-25333-1_5 · Cited by 3 · see citing works

Predicting the thermal conductivity of porous building materials with nanopores or reduced gas pressures

Walle, W. V. D., & Janßen, H. (2018) · Healthy, Intelligent and Resilient Buildings and Urban Environments · doi:10.14305/ibpc.2018.be-1.04 · Cited by 2 · see citing works

Comparative analysis of building insulation material properties and performance

Kumar, D., Alam, M., Zou, P. X. W., Sanjayan, J., & Memon, R. A. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110038 · Cited by 512 · see citing works

Structure-properties relationships of cellular materials from biobased polyurethane foams

Peyrton, J., & Avérous, L. (2021) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2021.100608 · Cited by 290 · see citing works

Engineering bioactive synthetic polymers for biomedical applications: a review with emphasis on tissue engineering and controlled release

Bolívar‐Monsalve, E. J., Álvarez, M. M., Hosseini, S., Espinosa-Hernandez, M. A., Ceballos‐González, C. F., Sánchez‐Domínguez, M., Shin, S. R., Çeçen, B., Hassan, S., Maio, E. D., et al. (2021) · Materials Advances · doi:10.1039/d1ma00092f · Cited by 113 · see citing works

Identifying the Most Efficient Natural Fibre for Common Commercial Building Insulation Materials with an Integrated PSI, MEREC, LOPCOW and MCRAT Model

Ulutaş, A., Balo, F., & Topal, A. (2023) · Polymers · doi:10.3390/polym15061500 · Cited by 108 · see citing works

Influences of turkey feather fiber loading on significant characteristics of rigid polyurethane foam: Thermal degradation, heat insulation, acoustic performance, air permeability and cellular structure

Khaleel, M., Soykan, U., & Çetin, S. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125014 · Cited by 74 · see citing works

Rigid composite bio-based polyurethane foams: From synthesis to LCA analysis

Recupido, F., Lama, G. C., Ammendola, M., Bossa, F. D. L., Minigher, A., Campaner, P., Morena, A. G., Tzanov, T., Ornelas, M., de Barros, A. C., et al. (2023) · Polymer · doi:10.1016/j.polymer.2023.125674 · Cited by 59 · see citing works

Experimental Studies of the Effective Thermal Conductivity of Polyurethane Foams with Different Morphologies

Soloveva, O. V., Solovev, S., Vankov, Y. V., & Зуфаровна, Ш. Р. (2022) · Processes · doi:10.3390/pr10112257 · Cited by 58 · see citing works

Novel recycling processes for thermoset polyurethane foams

Madbouly, S. A. (2023) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2023.100835 · Cited by 46 · see citing works

Quasi-static indentation and sound-absorbing properties of 3D printed sandwich core panels

Goh, G. D., Neo, S. J. C., Dikshit, V., & Yeong, W. Y. (2021) · Journal of Sandwich Structures & Materials · doi:10.1177/10996362211037015 · Cited by 45 · see citing works

Microstructure and thermal characterization of aerogel–graphite polyurethane spray-foam composite for high efficiency thermal energy utilization

Wi, S., Berardi, U., Loreto, S. D., & Kim, S. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122656 · Cited by 41 · see citing works

Closed Cell Rigid Polyurethane Foams Based on Low Functionality Polyols: Research of Dimensional Stability and Standardised Performance Properties

Kairytė, A., Kremensas, A., Balčiūnas, G., Członka, S., & Strąkowska, A. (2020) · Materials · doi:10.3390/ma13061438 · Cited by 37 · see citing works

Upgrading Sustainable Polyurethane Foam Based on Greener Polyols: Succinic-Based Polyol and Mannich-Based Polyol

Bossa, F. D. L., Verdolotti, L., Russo, V., Campaner, P., Minigher, A., Lama, G. C., Boggioni, L., Tesser, R., & Lavorgna, M. (2020) · Materials · doi:10.3390/ma13143170 · Cited by 36 · see citing works

Research of Wood Waste as a Potential Filler for Loose-Fill Building Insulation: Appropriate Selection and Incorporation into Polyurethane Biocomposite Foams

Augaitis, N., Vaitkus, S., Członka, S., & Kairytė, A. (2020) · Materials · doi:10.3390/ma13235336 · Cited by 34 · see citing works

Thermally enhanced pristine polyolefins: fundamentals, progress and prospective

Chaudhry, A. U., Mabrouk, A., & Abdala, A. A. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.07.101 · Cited by 33 · see citing works

Impact of aging on the energy efficiency of household refrigerating appliances

Paul, A., Baumhögger, E., Elsner, A., Reineke, M., Hueppe, C., Stamminger, R., Hoelscher, H., Wagner, H., Gries, U., Becker, W., et al. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117992 · Cited by 29 · see citing works

Estimation of the effective diffusivity of blowing agents in closed-cell low-density polyurethane foams based on thermal aging data

Andersons, J. A., Modniks, J., & Kirpļuks, M. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103365 · Cited by 26 · see citing works

Age-related efficiency loss of household refrigeration appliances: Development of an approach to measure the degradation of insulation properties

Hueppe, C., Geppert, J., Stamminger, R., Wagner, H., Hoelscher, H., Vrabec, J., Paul, A., Elsner, A., Becker, W., Gries, U., et al. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115113 · Cited by 24 · see citing works

Effect of thermal aging on the crashworthiness of foam-filled CFRP composite tubes under lateral compression

Sebaey, T. A., Junaedi, H., Alshahrani, H., Alyamani, R., & Akkad, K. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.12.180 · Cited by 24 · see citing works

Experimental Study on Reducing the Heat of Curing Reaction of Polyurethane Polymer Grouting Material

Zhang, B., Wang, B., Zhong, Y., Wang, S., Li, X., & Wang, L. (2021) · Advances in Polymer Technology · doi:10.1155/2021/9954498 · Cited by 23 · see citing works

The Preparation and Characterization of Polyurethane Foam with Coconut Oil Polyol and Rapeseed Oil Polyol

Liu, F., & Chen, S. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-02008-y · Cited by 21 · see citing works

Determination of the impact of environmental temperature on the thermal conductivity of polyisocyanurate (PIR) foam products

Makaveckas, T., Bliūdžius, R., & Burlingis, A. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102447 · Cited by 19 · see citing works

Highly Insulated Wall Systems with Exterior Insulation of Polyisocyanurate under Different Facer Materials: Material Characterization and Long-Term Hygrothermal Performance Assessment

Iffa, E. D., Tariku, F. A., & Simpson, Y. (2020) · Materials · doi:10.3390/ma13153373 · Cited by 18 · see citing works

Fabrication of castor oil-derived polyurethane mortar composites with energy saving and sound absorption characteristics

Mahmoud, A. A., Nasr, E.-S. A. R., Zulfiqar, S., Sarwar, M. I., & Maamoun, A. A. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02836-z · Cited by 17 · see citing works

Effect of the shape and the distribution of cells on the effective thermal conductivity of polyurethane foam

Hermama, C., Bensiali, B., Lahbabi, S., & Maliki, A. E. (2023) · Polymer Engineering and Science · doi:10.1002/pen.26376 · Cited by 15 · see citing works

Sustainable rigid polyurethane foam composites based on used palm oil and turkey feather fiber: structural, morphological, thermal, insulation and mechanical properties

Akdoğan, E., & Soykan, U. (2024) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-024-03080-x · Cited by 14 · see citing works

The effect of nano- and microfillers on thermal properties of Polyurethane foam

Valipour, F., Dehghan, S. F., & Hajizadeh, R. (2021) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-021-03150-3 · Cited by 14 · see citing works

Investigating the real life energy consumption of refrigeration appliances in Germany: Are present policies sufficient?

Hueppe, C., Geppert, J., Moenninghoff-Juessen, J., Wolff, L., Stamminger, R., Paul, A., Elsner, A., Vrabec, J., Wagner, H., Hoelscher, H., et al. (2021) · Energy Policy · doi:10.1016/j.enpol.2021.112275 · Cited by 14 · see citing works

Investigation of the relation between free volume and physico-mechanical performance in rigid polyurethane foam containing turkey feather fibers: Part 2

Soykan, U., Khaleel, M., Çetin, S., Yahşi, U., & Tav, C. (2022) · Journal of Cellular Plastics · doi:10.1177/0021955x221144541 · Cited by 13 · see citing works

Investigation of both thermal parameters and applications of closed-cell plastic thermal insulation foams with building energetic aspects

Lakatos, Á., Csontos, M., & Csík, A. (2023) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-023-12789-8 · Cited by 13 · see citing works

Temperature dependency of the long-term thermal conductivity of spray polyurethane foam

Holcroft, N. (2021) · Journal of Building Physics · doi:10.1177/17442591211045415 · Cited by 13 · see citing works

Comparative study of three insulation materials installed on type C independent tank for offshore LNG transportation

Ye, C., Lin, Y., & Pei, F. (2022) · Cryogenics · doi:10.1016/j.cryogenics.2022.103521 · Cited by 12 · see citing works

Utilization of Sunflower Husk Ash in the Production of Polyurethane Materials

Zakrzewska, P., Kuźnia, M., Zygmunt-Kowalska, B., Magiera, A., & Magdziarz, A. (2023) · Energies · doi:10.3390/en16248080 · Cited by 11 · see citing works

Hydrogen foam flooding for integrated oil recovery and clean energy storage in depleted reservoirs

Lu, T., Li, Z., & Du, L. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.143494 · Cited by 11 · see citing works

Porous surface coating fabrication for polyurethane synthetic leather: a review

Shi, Z., Kwok, M. W., & Ngai, T. (2025) · Collagen and Leather · doi:10.1186/s42825-025-00219-4 · Cited by 11 · see citing works

Determining the heat flow through the cabinet walls of household refrigerating appliances

Paul, A., Baumhögger, E., Elsner, A., Moczarski, L., Reineke, M., Sonnenrein, G., Hueppe, C., Stamminger, R., Hoelscher, H., Wagner, H., et al. (2020) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2020.10.007 · Cited by 11 · see citing works

Compressive Strength and Morphology of Rigid Polyurethane Foam for Road Applications

Boonsung, A., Horpibulsuk, S., Pathompongpairoj, A., Sawatwutichaikul, A., Choenklang, P., & Arulrajah, A. (2023) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-16138 · Cited by 9 · see citing works

Assessing the Environmental Impact of Biobased Exterior Insulation Panel: A Focus on Carbon Uptake and Embodied Emissions

Hossain, M., Therasme, O., Crovella, P. L., & Volk, T. A. (2024) · Energies · doi:10.3390/en17143406 · Cited by 9 · see citing works

Smart polymer-based membranes for biomedical applications: Mechanisms, fabrication, and advances in controlled drug delivery and tissue engineering

Bajgiran, N. K., Ahmadi, Y., Majidi, S., & Ahmadi, B. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.114443 · Cited by 7 · see citing works

Investigation of cellulose filaments as filler in rigid insulating polyurethane foam

Beaufils-Marquet, M., Blanchet, P., Hussain, A., & Landry, V. (2023) · BioResources · doi:10.15376/biores.18.3.6086-6117 · Cited by 7 · see citing works

The Polyurethane-Polystyrene Composite—Influence of the Blowing Agent Type on the Foaming Process, the Structure and the Properties

Malewska, E., Prociak, A., Świdzińska-Grela, N., & Kurańska, M. (2024) · Journal of Composites Science · doi:10.3390/jcs8040135 · Cited by 7 · see citing works

Freeze-Thaw Resistance of Thermal Insulating Materials Used in Cold Regions Engineering: A State-of-the-Art Review

Li, L., Li, D., Xiaoming, Z., Zhang, K., & Mu, Y. (2022) · Geofluids · doi:10.1155/2022/9015055 · Cited by 7 · see citing works

Experimental Study on Reducing the Heat of Curing Reaction of Polyurethane Polymer Grouting Material

Zhang, B., Wang, B., Zhong, Y., Wang, S., Li, X., & Wang, L. (2022) · Vide Leaf, Hyderabad eBooks · doi:10.37247/papt2ed.2.22.8 · Cited by 7 · see citing works

Aerogels with ultra-low thermal conductivity: Structural design, processing and applications

Gong, M., Guo, X., Wei, Z., Guo, Y., Yang, H., & Yang, S. (2026) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2026.101264 · Cited by 5 · see citing works

Polyurethane Foams

Mohammadi, A., Doctorsafaei, A., Ghodsieh, M., & Beigi-Boroujeni, S. (2023) · ACS symposium series · doi:10.1021/bk-2023-1439.ch007 · Cited by 5 · see citing works

An experimental toolbox for the physical characterization of thermal insulating polymeric foams

Shrestha, S. S., Demchuk, Z., Polo‐Garzon, F., Tamraparni, A., Damron, J. T., Howard, D., Saito, T., Sokolov, A. P., Hun, D., & Gainaru, C. P. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e36074 · Cited by 5 · see citing works

Polyurethane grouting materials for infrastructure reinforcement in cold regions: State of the art and perspectives

Liling, T., Ming, G., Wenbing, Y., Han, F., Guo, L. J., & Meng, G. (2025) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2025.104766 · Cited by 4 · see citing works

Mean Operating Temperature (MOT) of Commercial Roof Assembly and Its Impact on the Energy Performance

Molleti, S., Carrigan, L., & van Reenen, D. (2021) · Buildings · doi:10.3390/buildings11050216 · Cited by 4 · see citing works

Preparation and Characteristics of Fire-Safe Foamed Epoxy Composites Filled with Technogenic Waste from Ceramic Brick Production

Mostovoy, A., Bekeshev, A., Shcherbakov, A., Zhumabekova, A., Nurtai, Z., & Lopukhova, M. I. (2025) · Journal of Composites Science · doi:10.3390/jcs9010015 · Cited by 2 · see citing works

Design and Fabrication of Polyisocyanurate Foams toward Significantly Enhanced Thermal Resistivity

Wanasinghe, S. V., Demchuk, Z., Tamraparni, A., Tiwari, J., Feng, T., Gainaru, C. P., Park, B., Kim, S., Hun, D., Saito, T., et al. (2025) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.5c00263 · Cited by 2 · see citing works

Aging of polyurethane foam: Experimental analysis and modeling of cell gas composition and thermal conductivity

Schumacher, D., Guevara‐Carrion, G., Kasper, T., Paul, A., Elsner, A., Peters, B., Wollny, W., Blümel, M., Hoelscher, H., Brzoska-Steinhaus, N., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.129850 · Cited by 2 · see citing works

Durability and Reusability Assessment of Naturally Aged Synthetic Foam Insulation in Existing Buildings

Acar, G., Bossche, N. V. D., & Steeman, M. (2024) · Lecture notes in civil engineering · doi:10.1007/978-981-97-8305-2_51 · Cited by 2 · see citing works

Polyurethane nanocomposite foams for thermal insulations

Ghamarpoor, R., Fallah, A., Montazeri, S., & Ramezanzadeh, B. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29904-9.00008-6 · Cited by 1 · see citing works

Transient Thermal Conductivity Minimum in Phenolic Foam Insulation: Closed-Cell Structural Dependence and Long-Term Aging Behavior

Bae, M.-J., Kang, J., & Ahn, H. (2026) · Polymers · doi:10.3390/polym18151862 · Cited by 1 · see citing works

Study of the internal temperature of rigid polyurethane bodies using temperature sensors

Zhao, H., & Gao, J. (2022) · AIP Advances · doi:10.1063/5.0128055 · Cited by 1 · see citing works

Recycling Egyptian Rice Straw to Produce Low-Cost Building Materials for Energy Saving

Ibrahim, N. F., Aboeleneen, N. M., Abdelmonem, N., & Sorour, F. H. (2024) · Egyptian Journal of Petroleum · doi:10.62593/2090-2468.1024 · Cited by 1 · see citing works

Particle loss mitigation in asphalt by the addition of polyethylene foam

Abedraba-Abdalla, M., Thom, N. H., García, Á., & Li, L. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.137208 · Cited by 1 · see citing works

A comparison of a novel formulation of rigid polyurethane foams synthesis by hydrocarbon blowing agentsPreprint

Bakiri, Z. (2021) · Research Square · doi:10.21203/rs.3.rs-481242/v1

Assessment of the Performance of Hydrofluoroolefins, Hydrochlorofluoroolefins, and Halogen-Free Foam Blowing Agents in Cellular Plastic Foams

Park, B., USDOE Office of Energy Efficiency and Renewable Energy (EERE), Tamraparni, A., Desjarlais, A. O., Shrestha, S. S., & Motta, S. Y. (2023) · doi:10.2172/2007718

ЕКСПЕРИМЕНТАЛЬНЕ ДОСЛІДЖЕННЯ НИЗЬКОТЕМПЕРАТУРНОЇ ХОЛОДИЛЬНОЇ КАМЕРИ

Кравченко, М. Б., & Кокул, С. В. (2024) · Journal of Chemistry and Technologies · doi:10.15421/jchemtech.v31i4.289272

The effect of the isocyanate trimerisation catalyst on the chemical composition and strength characteristics of polyurethane-polyisocyanate foams

Vlasov, R., & Zaycev, S. (2024) · From Chemistry Towards Technology Step-By-Step · doi:10.52957/2782-1900-2024-5-3-91-103

Vliyanie katalizatora trimerizacii izocianata na himicheskij sostav i prochnostnye harakteristiki poliuretan-poliizocianuratnyh penoplastov

Vlasov, R., & Zaycev, S. (2024) · From Chemistry Towards Technology Step-By-Step · doi:10.52957/2782-1900-2024-5-3-23-36

The effects of ether, ester, carbonate polyol and hydrophilic group contents on the mechanical properties and abrasion resistance of solvent-free water-based polyurethane foam

Zeng, W.-S., Lee, D., Luo, Y.-S., & Rwei, S. (2025) · Journal of Polymer Research · doi:10.1007/s10965-025-04355-7

Morphological, rheological and viscoelastic properties of polyurethane nanocomposites

Amin, K. N. M., & Hipeni, A. R. H. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29904-9.00004-9

Reusability and Durability of Thermal Insulation Materials: Performance and Degradation Assessment of Naturally Aged Polyurethane and Polyisocyanurate Foam Insulation

Acar, G., Bossche, N. V. D., & Steeman, M. (2025) · Lecture notes in civil engineering · doi:10.1007/978-981-95-1822-7_22

Minimized aging of isocyanurate-based rigid cellular foams for buildings through tailored barrier facers and optimized formulation

Wanasinghe, S. V., Tamraparni, A., Demchuk, Z., Steenman, W., Hun, D., Saito, T., & Shrestha, S. S. (2026) · Journal of Building Engineering · doi:10.1016/j.jobe.2026.115198

Development of new building blocks derived from microalgae oil for the elaboration of new biobased polyurethane foams

Peyrton, J. (2020) · theses.fr (ABES) · doi:10.70675/18bbeba8zeef7z4b90z96caze4f341909f6a

Alacsony illékony szervesanyag (VOC) -tartalmú poliuretánok fejlesztése és vizsgálata

Hornyák-Mester, E., Muránszky, G., Groh, W. P., Viskolcz, B., Farkas, L., & Mihalkó, A. (2026) · Scientia et Securitas · doi:10.1556/112.2026.00312

Effect of Blowing-Agent Depletion on Thermal Conductivity During Accelerated Thermal Aging of Polyisocyanurate Foams

Makaveckas, T., Jaskūnas, A., Bliūdžius, R., Kumžienė, J., & Šipailaitė-Ramoškienė, V. (2026) · Buildings · doi:10.3390/buildings16153122

Microstructure and blowing agent concentration analysis in accelerated aged polyurethane & polyisocyanurate insulation

Madzarevic, J., & Berardi, U. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/609/6/062016 · Cited by 2 · see citing works

Environmentally Friendly Blowing Agents for Producing Polyisocyanurate (PIR) Foams: Study of the Thermal Conductivity Aging and Mechanical Properties

Torres‐Regalado, P., Merillas, B., & Rodríguez‐Pérez, M. Á. (2025) · Nano Select · doi:10.1002/nano.70034

NUMERICAL STUDY ON AGING OF THERMAL CONDUCTIVITY IN PLASTIC INSULATION FOAMS

Kondo, Y., NAGASAWA, Y., Ogasawara, T., & Murakami, S. (2006) · Journal of Environmental Engineering (Transactions of AIJ) · doi:10.3130/aije.71.23_4 · Cited by 2 · see citing works

A Method for Evaluating the Effect of Blowing Agent Condensation on Sprayed Polyurethane Foams

Kumaran, M. K., Bomberg, M. T., Marchand, R. G., Ascough, M. R., & Creazzo, J. A. (1989) · Journal of Thermal Insulation · doi:10.1177/109719638901300207 · Cited by 22 · see citing works

Effect of the cellular structure on thermal conductivity of rigid closed-cell foam polymers during long-term aging

Dement'ev, A. G., Dementyev, M., Zinger, P. A., & Metlyakova, I. R. (1999) · Mechanics of Composite Materials · doi:10.1007/bf02257243 · Cited by 6 · see citing works