The DOI matches its Crossref record.
Thermal performance optimization and evaluation of a radial finned shell-and-tube latent heat thermal energy storage unit
Abstract
Abstract Add of fin is a simple and effective way to enhance the thermal behavior of latent heat thermal energy storage (LHTES). The target of this research is finding the most appropriate radial fins arrangement to accelerate phase change material (PCM) melting process in vertical LHTES unit. The effect of adding aluminum fins which possess the much higher thermal conductivity compared to PCM on melting process was investigated by numerical simulation firstly. The full melting time of radial finned LHTES unit decreases 44.0% compared with LHTES unit without fin. Then, the effects of fin height and pitch on thermal performance are simultaneously considered. The dimensionless fin height of 0.642 is recommended in this study. The thermal performances of vertical finned LHTES with four different fin arrangements (lower fins, upper fins, middle fins and arithmetic fins) were explored. Numerical results show that the complete melting time could be reduced 49.9% by arithmetic fins. The root mean square (RMS) of liquid fraction is proposed to describe the uniformity of the melting process of PCM. In this study, the root mean square of the LHTES unit using arithmetic fins is the lowest in the four fins arrangements, following by lower fins, middle fins and upper fins. For maximizing thermal performance, adding arithmetic fins to LHTES is recommended.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit
Yang, X., Guo, J., Yang, B., Cheng, H., Wei, P., & He, Y.-L. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115772 · Cited by 309
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Liu, Y., Zheng, R., & Li, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112783 · Cited by 276
Effect of geometric parameter and nanoparticles on PCM melting in a vertical shell-tube system
Nie, C., Liu, J., & Deng, S. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116290 · Cited by 75
Metadata
- Authors
- Pu, L., Zhang, S., Xu, L., & Li, Y.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 166
- Pages
- 114753
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2991817916
- Cited by
- 166
- References
- 0
- FWCI
- 9.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal performance optimization and evaluation of a radial finned shell-and-tube latent heat thermal energy storage unit. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2019.114753
- The paper
- Pu, L., Zhang, S., Xu, L., & Li, Y. (2020). Thermal performance optimization and evaluation of a radial finned shell-and-tube latent heat thermal energy storage unit. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2019.114753
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.