The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
High performance, microarchitected, compact heat exchanger enabled by 3D printing
Open accessAbstract
Additive manufacturing has created a paradigm shift in materials design and innovation, providing avenues and opportunities for geometric design freedom and customizations. Here, we report a microarchitected gyroid lattice liquid–liquid compact heat exchanger realized via stereolithography additive manufacturing as a single ready-to-use unit. This lightweight (∼240 kg/m 3 ) compact heat exchanger (with conjoined headers), with an engineered porosity of 80% and a separating wall thickness of 300 μm, has a surface to volume ratio of 670 m 2 /m 3 . X-ray computed tomography imaging confirms a defect-free 3D printed heat exchanger. The thermo-hydraulic characteristics were experimentally measured using water as the working fluid. The measurements indicate that the heat exchanger evinces an overall heat transfer coefficient of 120 - 160 W / m 2 K for hot fluid Reynolds number Re h in the range of 10 - 40 . Additionally, finite element analysis was conducted to evaluate the thermo-hydraulic characteristics of the gyroid lattice heat exchanger. The experimental results show -a 55 % increase in exchanger effectiveness for the additively manufactured gyroid lattice heat exchanger in comparison to a thermodynamically equivalent, most-efficient, counter-flow heat exchanger at one tenth of its size. The superiority of our architected heat exchanger to extant work is also demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784 · cited 1×
“Advances in AM-enabled architected cellular materials [21,22] with tunable mechanical [2,23 – 25], sensing [26,27], electromagnetic shielding [28], optical [29], energy storage [30], and thermal [31 – 33] properties are realized by the virtue of tailored topological design [34,35] at different…”
Jafari, D., & Wits, W. W. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.109 · Cited by 289
Design and evaluation of an additively manufactured aircraft heat exchanger
Saltzman, D., Bichnevicius, M., Lynch, S., Simpson, T. W., Reutzel, E. W., Dickman, C., & Martukanitz, R. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.032 · Cited by 169
Cited by
Additive manufacturing of heat exchangers in aerospace applications: a review
Careri, F., Khan, R. H. U., Todd, C., & Attallah, M. M. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121387 · Cited by 320
Metadata
- Authors
- Dixit, T., Al-Hajri, E., Paul, M. C., Nithiarasu, P., & Kumar, S.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2022-06
- Volume
- 210
- Pages
- 118339
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W4220984747
- Cited by
- 247
- References
- 3
- FWCI
- 17.83
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High performance, microarchitected, compact heat exchanger enabled by 3D printing. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2022.118339
- The paper
- Dixit, T., Al-Hajri, E., Paul, M. C., Nithiarasu, P., & Kumar, S. (2022). High performance, microarchitected, compact heat exchanger enabled by 3D printing. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2022.118339
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.