Cited by 0Heat Transfer and Boiling StudiesRefrigeration and Air Conditioning TechnologiesHeat transfer and supercritical fluids

Flow boiling heat transfer of propane (R290) inside tubes. A review of experimental databases and correlations

Open access
Trincado, Roberto, Ortega, Ignacio, Sieres, Jaime·2026·Applied Thermal Engineering

Abstract

Heat pumps will be central in the path towards decarbonizing the heating sector, highlighting the importance of low-GWP refrigerants to meet climate-neutrality targets by 2050, with propane (R290) representing one of the most promising long-term alternatives. The boiling heat transfer coefficient (HTC) is a key parameter in the design of heat exchangers for these devices. This review provides a comprehensive and comparative analysis of experimental studies and correlations for boiling HTC inside smooth and microfin tubes with propane. A total of 2889 experimental datapoints from 32 studies were analysed, covering inner diameters from 0.96 to 9.43 mm, mass velocities from 50 to 600 kg/m 2 -s, saturation temperatures from -35 to 44 °C and heat fluxes from 2.48 to 227 kW/m 2 . The effects of the main parameters governing the boiling HTC are systematically analysed. A tube-diameter/flow-pattern classification is employed to assess the performance of 29 boiling HTC correlations for smooth and microfin tubes. Additionally, 68 dryout datapoints are compared with 7 correlations. The results demonstrate that no single correlation of boiling HTC provides consistent accuracy across the range of operating conditions considered. Instead, correlation performance is shown to depend strongly on tube diameter and flow pattern. The best-performing correlations are identified by analysing their performance across different operating domains using standard accuracy metrics. Furthermore, a lack of experimental data on the influence of oil during boiling, particularly inside microfin tubes, as well as on the effect of reducing the inner diameter in conventional tubes was identified, highlighting the need for further research in these areas.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.applthermaleng.2026.132709

Cites

109 of 109 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Cites

Flagged first, then by citations

Cited by

Still being checked.

Authors
Trincado, R., Ortega, I., & Sieres, J.
Affiliations
Universidade de Vigo (ES)
Corresponding author
Sieres, Jaime
Venue
Applied Thermal Engineering
Publisher
Elsevier BV
Published
2026-09
Volume
304
Pages
132709
ISSN
1359-4311 (ISSN-L)
OpenAlex
W7201976145
Cited by
0
References
109
FWCI
0.00
Type
journal article
Language
en
Open access
Locations
  • Applied Thermal Engineering (publishedVersion, cc-by)
  • Investigo Institutional repository of UVigo (Universidade de Vigo) (submittedVersion, cc-by-nc-nd)
Funders
Agencia Estatal de Investigación (PID2022\u2013137739OB-I00)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Boiling Studies
  • Physical Sciences › Engineering › Mechanical Engineering › Refrigeration and Air Conditioning Technologies
  • Physical Sciences › Engineering › Computational Mechanics › Heat transfer and supercritical fluids
Keywords
flow boiling, heat transfer coefficient, propane, low-GWP refrigerants, heat pumps, microfin tubes, smooth tubes, boiling heat transfer correlations, dryout, tube diameter, flow patterns, heat exchanger design

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review