The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties
Open accessAbstract
Abstract Superhydrophobic aluminum alloy surfaces are obtained by chemical etching using 1 M NaOH solution followed by passivation using 0.01 M ethanolic stearic acid (SA) solution. The formation of low surface energy aluminum stearate takes place during the passivation process between stearic acid and hydroxyl group-terminated aluminum alloy surfaces. A schematic model of the SA passivation process on the OH terminated Al-surfaces is presented in this work. The flake-like micro-nanostructure morphology of the low surface energy aluminum stearate increases the water contact angle by more than 150°, demonstrating the superhydrophobic properties. The corrosion current density reduces and polarization resistance increases systematically with increasing passivation time. The polarization resistance, calculated from the Tafel curve of the superhydrophobic surfaces prepared by stearic acid passivation for 60 min, is determined to be 137 times larger than that of the as-received aluminum alloy substrate. Similarly, the modulus of impedance, as-determined from electrochemical impedance spectroscopy (EIS), is found to be 70 times larger for the superhydrophobic surfaces compared with the as-received aluminum alloy surface. These results demonstrate that the superhydrophobic aluminum alloy surfaces created by chemical etching followed by passivation have superior corrosion resistance properties than the as-receive aluminum alloy substrate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Cited by
Superhydrophobic epoxy coating modified by fluorographene used for anti-corrosion and self-cleaning
Yang, Z., Wang, L., Sun, W., Li, S., Zhu, T., Liu, W., & Liu, G. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.009 · Cited by 269
Metadata
- Authors
- Huang, Y., Sarkar, D. K., & Grant Chen, X.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2015-11
- Volume
- 356
- Pages
- 1012-1024
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W2131973626
- Cited by
- 225
- References
- 1
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.