The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Laser textured superhydrophobic surfaces and their applications for homogeneous spot deposition
Open accessAbstract
This work reports the laser surface modification of 304S15 stainless steel to develop superhydrophobic properties and the subsequent application for homogeneous spot deposition. Superhydrophobic surfaces, with steady contact angle of ∼154° and contact angle hysteresis of ∼4°, are fabricated by direct laser texturing. In comparison with common pico-/femto-second lasers employed for this patterning, the nanosecond fiber laser used in this work is more cost-effective, compact and allows higher processing rates. The effect of laser power and scan line separation on surface wettability of textured surfaces are investigated and optimized fabrication parameters are given. Fluid flows and transportations of polystyrene (PS) nanoparticles suspension droplets on the processed surfaces and unprocessed wetting substrates are investigated. After evaporation is complete, the coffee-stain effect is observed on the untextured substrates but not on the superhydrophobic surfaces. Uniform deposition of PS particles on the laser textured surfaces is achieved and the deposited material is confined to smaller area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807 · cited 3×
“Generally, a ertain surface roughness is required to achieve these low wettbility substrates [4,5] and various techniques for attaining them ave been investigated, such as lithography, etching, deposition nd laser processing [6].”
BackgroundMethodRESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316 · cited 2×
“Generally, a ertain surface roughness is required to achieve these low wettbility substrates [4,5] and various techniques for attaining them ave been investigated, such as lithography, etching, deposition nd laser processing [6].”
BackgroundMethodCapillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
Super‐Hydrophobic Surfaces: From Natural to Artificial
Feng, L., Li, S., Li, Y., Li, H., Zhang, L., Zhai, J., Song, Y., Liu, B., Jiang, L., & Zhu, D. (2002) · Advanced Materials · doi:10.1002/adma.200290020 · Cited by 4,404
Self-cleaning surfaces — virtual realities
Blossey, R. (2003) · Nature Materials · doi:10.1038/nmat856 · Cited by 2,314
Bhushan, B., & Jung, Y. C. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.04.003 · Cited by 1,989
Marangoni Effect Reverses Coffee-Ring Depositions
Hu, H., & Larson, R. G. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0609232 · Cited by 1,645
Suppression of the coffee-ring effect by shape-dependent capillary interactions
Yunker, P. J., Still, T., Lohr, M. A., & Yodh, A. G. (2011) · Nature · doi:10.1038/nature10344 · Cited by 1,618
Direct femtosecond laser surface nano/microstructuring and its applications
Vorobyev, A. Y., & Guo, C. (2013) · Laser & Photonics Reviews · doi:10.1002/lpor.201200017 · Cited by 1,172
Yan, Y. Y., Gao, N., & Barthlott, W. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.08.005 · Cited by 1,000
Cited by
A review on suppression and utilization of the coffee-ring effect
Mampallil, D., & Eral, H. B. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.12.008 · Cited by 677
Metadata
- Authors
- Ta, V. D., Dunn, A., Wasley, T. J., Li, J., Kay, R. W., Stringer, J., Smith, P. J., Esenturk, E., Connaughton, C., & Shephard, J. D.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2016-03
- Volume
- 365
- Pages
- 153-159
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W2230387669
- Cited by
- 286
- References
- 28
- FWCI
- 13.10
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Laser textured superhydrophobic surfaces and their applications for homogeneous spot deposition. https://app.cochat.ai/papers/10.1016/j.apsusc.2016.01.019
- The paper
- Ta, V. D., Dunn, A., Wasley, T. J., Li, J., Kay, R. W., Stringer, J., Smith, P. J., Esenturk, E., Connaughton, C., & Shephard, J. D. (2016). Laser textured superhydrophobic surfaces and their applications for homogeneous spot deposition. Applied Surface Science. https://doi.org/10.1016/j.apsusc.2016.01.019
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
