The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Laser polishing of 3D printed mesoscale components
Open accessAbstract
Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm Sa) was achieved at the optimised settings (fluence of 9 J/cm2 and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps and irregularities that were prevalent on the as-received stainless steel samples. The optimised laser polishing technology was consequently implemented for serial finishing of structured 3D printed mesoscale SS316L components. This led to substantial reductions in areal Sa and St parameters by 75% (0.489–0.126 μm) and 90% (17.71–1.21 μm) respectively, without compromising the geometrical accuracy of the native 3D printed samples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to the High Temperature Oxidation of Metals
Birks, N., Meier, G. H., & Pettit, F. S. (2006) · doi:10.1017/cbo9781139163903 · Cited by 2,189
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
Yasa, E., Kruth, J.-P., & Deckers, J. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.063 · Cited by 265
Laser polishing of parts built up by selective laser sintering
Lamikiz, A., Sánchez, J. A., López de Lacalle, L. N., & Arana, J. L. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.01.013 · Cited by 264
Wang, D., Liu, Y., Yang, Y., & Xiao, D. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2015-0078 · Cited by 254
Performance of laser polishing in finishing of metallic surfaces
Bordatchev, E. V., Hafiz, A. M. K., & Tutunea-Fatan, O. R. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5761-3 · Cited by 181
Laser polishing of additive laser manufacturing surfaces
Rosa, B., Mognol, P., & Hascoët, J.-Y. (2015) · Journal of Laser Applications · doi:10.2351/1.4906385 · Cited by 174
Betz, G., Wehner, G. K., Toth, L. E., & Joshi, A. A. (1974) · Journal of Applied Physics · doi:10.1063/1.1663236 · Cited by 113
High temperature oxidation of stainless steel AISI316L in air plasma
Vesel, A., Mozetič, M., Drenik, A., Hauptman, N., & Balat-Pichelin, M. J. H. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.06.017 · Cited by 101
Perry, T. L., Werschmoeller, D., Li, X., Pfefferkorn, F. E., & Duffie, N. A. (2009) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.3106033 · Cited by 80
Roughness prediction on laser polished surfaces
Ukar, E., Lamíkiz, A., Martínez, S., Tabernero, I., & de Lacalle, L. N. L. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.01.007 · Cited by 76
Effect of beam diameter on pulsed laser polishing of S7 tool steel
Pfefferkorn, F. E., Duffie, N. A., Morrow, J. D., & Wang, Q. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.03.055 · Cited by 70
Surface prediction model for thermocapillary regime pulsed laser micro polishing of metals
Wang, Q., Morrow, J. D., Ma, C., Duffie, N. A., & Pfefferkorn, F. E. (2015) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.05.005 · Cited by 58
Influence of laser polishing on the high cycle fatigue strength of medium carbon AISI 1045 steel
Avilés, R., Albizuri, J., Lamíkiz, A., Ukar, E., & Avilés, A. (2011) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2011.06.004 · Cited by 56
Effect of Process Parameters on the Melting Ratio in Overlap Pulsed Laser Welding
Sabbaghzadeh, J., Hamedi, M. J., Ghaini, F. M., & Torkamany, M. J. (2008) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-008-9137-7 · Cited by 44
Guo, W., Hua, M., Tse, P. W.-T., & Mok, C. K. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3558-1 · Cited by 39
Cited by
Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021) · Applied Sciences · doi:10.3390/app11031213 · Cited by 748
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Metal additive manufacturing: Technology, metallurgy and modelling
Cooke, S., Ahmadi, K., Willerth, S., & Herring, R. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.07.025 · Cited by 378
Fundamental aspects and recent developments in electropolishing
Han, W., & Fang, F. (2019) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2019.01.001 · Cited by 300
Metadata
- Authors
- Bhaduri, D., Penchev, P., Batal, A., Dimov, S., Soo, S. L., Sten, S., Harrysson, U., Zhang, Z., & Dong, H.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2017-05
- Volume
- 405
- Pages
- 29-46
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W2585900166
- Cited by
- 257
- References
- 15
- FWCI
- 16.40
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.