The DOI matches its Crossref record; 179 of the 179 references it cites were found in a registry or an index.
Metal additive manufacturing: Technology, metallurgy and modelling
Abstract
Abstract This paper provides a comprehensive review of metal additive manufacturing, a rapidly evolving field with innovative technologies and processes. The purpose of this review paper is to provide a complete picture of the current research on metal AM and its capabilities. An overview of metal AM and the current processing methods are provided, along with a brief introduction to the complex physics behind the melt pool formation. Common metal AM characteristic defects are discussed as well as the current metals and alloys that are commercially available. Furthermore, process optimization techniques and computational modelling methods are reviewed. Lastly, various post-processing methods to improve surface roughness, mechanical properties and dimensional precision are discussed. Although the library for printable alloys is increasing, there is still a need for alloy development outside of the commercial setting. Furthermore, there is currently not a complete numerical model of the AM process which is mainly due to the computational costs. Although metal AM is still in its infancy, the frequency and significance of new developments are driving AM to mainstream adoption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
A new finite element model for welding heat sources
Goldak, J., Chakravarti, A., & Bibby, M. (1984) · Metallurgical Transactions B · doi:10.1007/bf02667333 · Cited by 3,374
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Cited by
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Metadata
- Authors
- Cooke, S., Ahmadi, K., Willerth, S., & Herring, R.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 57
- Pages
- 978-1003
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W3048348312
- Cited by
- 378
- References
- 179
- FWCI
- 21.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Metal additive manufacturing: Technology, metallurgy and modelling. https://app.cochat.ai/papers/10.1016/j.jmapro.2020.07.025
- The paper
- Cooke, S., Ahmadi, K., Willerth, S., & Herring, R. (2020). Metal additive manufacturing: Technology, metallurgy and modelling. Journal of Manufacturing Processes. https://doi.org/10.1016/j.jmapro.2020.07.025
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.