The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Wear resistance of FeCoCrNiMnAlx high-entropy alloy coatings at high temperature
Abstract
The FeCoCrNiMnAlx high-entropy alloy (HEA) coatings were produced on 4Cr5MoSiV steel by laser cladding, which can improve the high temperature oxidation resistance and wear resistance of the substrate steel in its service environment. The effects of Al addition on the microstructure and properties of the coatings were systematically investigated. The addition of Al element promoted the transition of FCC to FCC + BCC (B2) phases in the cladding layer and also refined the grains. Thereby, with the Al addition from 0 to 0.75, the micro-hardness and room-temperature wear weight loss of the HEA coatings increased and decreased, respectively, i.e. from 224.4 HV0.5 and to 344.2 HV0.5 and from 6.0 mg to 1.1 mg, compared with those of the base metal (227.1 HV0.5 and 10.5 mg). In the high-temperature oxidation process, fine and dense α-Al2O3 was preferentially generated because of its lowest absolute Gibbs free energy compared to the other oxides. The generation of α-Fe2O3 and Cr2O3 also promoted the heterogeneous nucleation of α-Al2O3. The high-temperature oxidation weight gain and wear weight loss of the FeCoCrNiMnAl0.75 cladding layer was approximately 58% and 17% of those of the base metal, respectively, and the wear mechanism was mainly abrasive wear.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to the High Temperature Oxidation of Metals
Birks, N., Meier, G. H., & Pettit, F. S. (2006) · doi:10.1017/cbo9781139163903 · Cited by 2,189
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Cited by
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Metadata
- Authors
- Cui, Y., Shen, J., Manladan, S. M., Geng, K., & Hu, S.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 512
- Pages
- 145736
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W3006158098
- Cited by
- 209
- References
- 2
- FWCI
- 11.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Wear resistance of FeCoCrNiMnAlx high-entropy alloy coatings at high temperature. https://app.cochat.ai/papers/10.1016/j.apsusc.2020.145736
- The paper
- Cui, Y., Shen, J., Manladan, S. M., Geng, K., & Hu, S. (2020). Wear resistance of FeCoCrNiMnAlx high-entropy alloy coatings at high temperature. Applied Surface Science. https://doi.org/10.1016/j.apsusc.2020.145736
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.