The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Microstructural characteristics and properties of CoCrFeNiNbx high-entropy alloy coatings on pure titanium substrate by pulsed laser cladding
Abstract
Abstract CoCrFeNiNbx (x = 0 or 1 at.%) high-entropy alloy (HEA) coatings with good metallurgical bonding were successfully prepared on surfaces of pure titanium sheets by pulsed laser cladding. Phase constitutions and microstructural characteristics of the HEA coatings were characterized and analyzed by combined use of X-ray diffraction, electron channeling contrast imaging, energy dispersive spectroscopy and electron backscatter diffraction techniques. Results show that the HEA coating without Nb is consisted of BCC solid-solution phase with equiaxed bulk grain morphology and Cr2Ti Laves phase (C14-type hexagonal structure) with fine interdendritic lamellar morphology. After adding 1 at.% Nb, in addition to the BCC solid-solution phase and the Cr2Ti Laves phase, Cr2Nb Laves phase with C15-type cubic structure also appears in the interdendritic region in the HEA coating. Hardness tests reveal that the CoCrFeNiNbx HEA coatings are significantly harder than the pure titanium substrate (~122 HV). The hardness value of the HEA coating with 1 at.% Nb reaches 1008 HV, which is ~ 8.3 times that of the substrate and considerably higher than that of bulk HEAs with similar compositions. Such high hardness can be attributed to the combined contribution from solid-solution hardening, and hardening from grain refinement and Laves phases with fine lamellar morphologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Tuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
Cited by
Stein, F., & Leineweber, A. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05509-2 · Cited by 473
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Metadata
- Authors
- Xiang, K., Chen, L.-Y., Chai, L., Guo, N., & Wang, H.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 517
- Pages
- 146214
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W3013000680
- Cited by
- 167
- References
- 2
- FWCI
- 11.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructural characteristics and properties of CoCrFeNiNbx high-entropy alloy coatings on pure titanium substrate by pulsed laser cladding. https://app.cochat.ai/papers/10.1016/j.apsusc.2020.146214
- The paper
- Xiang, K., Chen, L.-Y., Chai, L., Guo, N., & Wang, H. (2020). Microstructural characteristics and properties of CoCrFeNiNbx high-entropy alloy coatings on pure titanium substrate by pulsed laser cladding. Applied Surface Science. https://doi.org/10.1016/j.apsusc.2020.146214
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.