Fault diagnosis of rolling bearing of wind turbines based on the Variational Mode Decomposition and Deep Convolutional Neural Networks
The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
Abstract Machine learning techniques have been successfully applied in intelligent fault diagnosis of rolling bearings in recent years. However, in the real world industrial application, the dissimilarity of data due to changes in the working conditions and data acquisition environment often cause a poor performance of the existing fault diagnosis methods. Consequently, to address these inadequacies, this paper developed a novel method by integrating the Convolutional Neural Networks (CNNs) with the Variational Mode Decomposition (VMD) algorithms. Named as “Variational Mode Decomposition with Deep Convolutional Neural Networks (VMD-DCNNs)”, the method, in an end-to-end way, directly processes raw vibration signals without artificial experiences and manual intervention to realize the fault diagnosis of rolling bearings. In addition, the CNN technique is used to extract features from each Intrinsic Mode Function (IMF) in order to address the deficiency in extracting features from a single source and to achieve an effective and efficient fault diagnosis of rolling bearings under different environments and states. The value of parameter K of the VMD-DCNNs model is optimized by considering time complexity and generalization ability of the model. Lastly, bearing experiments are conducted to verify the superiority of the VMD-DCNNs in diagnosing fault under different conditions. The visualizations of the signals in the convolutional layer explain the reasonability in selecting the value of parameter K and they also indicate that the translational invariances in a raw IMF component have been learned by the VMD-DCNNs model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Variational Mode Decomposition
Dragomiretskiy, K., & Zosso, D. (2014) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2013.2288675 · Cited by 9,184
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222 · cited 1×
“[20] proposed the use of Convolutional Neural Networks (CNNs) for fault diagnosis.”
BackgroundA Hybrid Prognostics Approach for Estimating Remaining Useful Life of Rolling Element Bearings
Wang, B., Lei, Y., Li, N., & Li, N. (2020) · IEEE Transactions on Reliability · doi:10.1109/tr.2018.2882682 · Cited by 1,917 · cited 2×
“The datasets of the experiments conducted in Case Western Reserve University [26](CWRU) and Xi’an Jiao Tong University [27](XJTU) are used to demonstrate the superiority of the VMD-DCNNs model in detecting faults based on the data obtained under noisy and various loads conditions.”
MethodZhang, W., Li, C., Peng, G., Chen, Y., & Zhang, Z. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.022 · Cited by 1,421
Self-citationMultiscale Convolutional Neural Networks for Fault Diagnosis of Wind Turbine Gearbox
Jiang, G., He, H., Yan, J., & Xie, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844805 · Cited by 892 · cited 9×
“Table: 9 The details of the load configuration Case Name Training samples Testing samples 0 HP -1 HP Load with 0 HP Load with 1 HP 0 HP -2 HP Load with 0 HP Load with 2 HP 0 HP -3 HP Load with 0 HP Load with 3 HP 1 HP -0 HP Load with 1 HP Load with 0 HP 1 HP -2 HP Load with 1 HP Load with 2 HP 1 HP -3 HP Load with 1 H…”
BackgroundMethodInfluentialEmpirical Mode Decomposition based ensemble deep learning for load demand time series forecasting
Qiu, X., Ren, Y., Suganthan, P. N., & Amaratunga, G. A. J. (2017) · Applied Soft Computing · doi:10.1016/j.asoc.2017.01.015 · Cited by 450 · cited 2×
“19 8 Conv_4 [2,1]/[1,1] 64 [29,3] 9 Pool_4 [2,1]/[2,1] 64 [14,3] 10 Conv_5 [2,1]/[1,1] 128 [13,3] 11 Pool_5 [2,1]/[2,1] 128 [6,3] 12 FC [11,2304] 13 Softmax 4.”
MethodGlowacz, A., Glowacz, W., Glowacz, Z., & Kozik, J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.036 · Cited by 374 · cited 1×
“The efficiency and safety of wind turbines in working condition are significantly affected by the health of the bearings [7].”
BackgroundHaidong, S., Hongkai, J., Xingqiu, L., & Shuaipeng, W. (2018) · Knowledge-Based Systems · doi:10.1016/j.knosys.2017.10.024 · Cited by 321
Liang, P., Deng, C., Wu, J., Yang, Z., Zhu, J., & Zhang, Z. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.103132 · Cited by 221 · cited 2×
“In addition, the time complexities of the VMD-DCNNs model with K = 3 are less than those of the WT-CNNs [28] and MSCNNs [29].”
BackgroundMethodLi, J., Yao, X., Wang, X., Yu, Q., & Zhang, Y. (2020) · Measurement · doi:10.1016/j.measurement.2019.107419 · Cited by 211
Gu, R., Chen, J., Hong, R., Wang, H., & Wu, W. (2019) · Measurement · doi:10.1016/j.measurement.2019.106941 · Cited by 195
Li, J., Yao, X., Wang, H., & Zhang, J. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.02.056 · Cited by 186 · cited 1×
“Therefore, is set as a constant with a value of 0 [17,24,25] to obtain a better denoising effect for a signal with an arbitrary SNR.”
BackgroundChen, X., Yang, Y., Cui, Z., & Shen, J. (2019) · Energy · doi:10.1016/j.energy.2019.03.057 · Cited by 156
Self-citationWind Turbine Fault Diagnosis and Fault-Tolerant Torque Load Control Against Actuator Faults
Badihi, H., Zhang, Y. M., & Hong, H. (2014) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2014.2364956 · Cited by 154 · cited 1×
“maintenance costs, and extend, their service lives [8,9].”
BackgroundLi, J., Li, M., & Zhang, J. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2017.04.036 · Cited by 132 · cited 4×
“D signal IM F 1 IM F 2 IM F k Wedth×Height 2048×1 Wedth×Height 2048×k VMD K=k Conv_2 Kernel 5×1 Conv_4 Kernel 2×1 FC Conv_1 Kernel 11×1 16@510×k 16@255×k BN Pool_1 32@126×k 32@63×k Pool_2 BN BN BNPool_3 Conv_3 Kernel 3×1 Conv_5 Kernel 2×1 32@61×k 32@30×k BN Pool_5 128@13×k 128@6×k Pool_4 64@14×k 64@29×k Softmax 1 2 3…”
BackgroundInfluentialLi, Y., Cheng, G., Liu, C., & Chen, X. (2018) · Measurement · doi:10.1016/j.measurement.2018.08.002 · Cited by 123
Sparse Time-Frequency Representation for Incipient Fault Diagnosis of Wind Turbine Drive Train
Yang, B., Liu, R., & Chen, X. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2828739 · Cited by 84 · cited 1×
“Hitherto, various techniques of signal processing are used to analyze and extract vibration information from raw signals [10-13].”
MethodSu, Z., Tang, B., Ma, J., & Deng, L. (2013) · Measurement · doi:10.1016/j.measurement.2013.10.041 · Cited by 72
Li, J., & Fang, J. (2013) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2013.2258769 · Cited by 55 · cited 1×
“value is different due to the sensor reset error [31].”
BackgroundVariational mode decomposition applied to offshore wind turbine rolling bearing fault diagnosis
Zheng, X., Zhou, G., Wang, J., Haohan, R., & Li, D. (2016) · Chinese Control Conference (CCC) · doi:10.1109/chicc.2016.7554407 · Cited by 6 · cited 1×
“[16] combined the VMD algorithm with the envelope demodulation method, and diagnosed the fault forms of bearing through envelope spectrum analysis of the decomposed modes.”
Method
Cited by
A review of the application of deep learning in intelligent fault diagnosis of rotating machinery
Zhu, Z., Lei, Y., Qi, G., Chai, Y., Mazur, N., An, Y., & Huang, X. (2023) · Measurement · doi:10.1016/j.measurement.2022.112346 · Cited by 731
Ding, Y., Jia, M., Miao, Q., & Cao, Y. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108616 · Cited by 559
Huang, Y.-J., Liao, A.-H., Hu, D.-Y., Shi, W., & Zheng, S.-B. (2022) · Measurement · doi:10.1016/j.measurement.2022.111935 · Cited by 197
Metadata
- Authors
- Xu, Z., Li, C., & Yang, Y.
- Venue
- Applied Soft Computing
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 95
- Pages
- 106515
- ISSN
- 1568-4946 (ISSN-L)
- OpenAlex
- W3041218800
- Cited by
- 185
- References
- 20
- FWCI
- 13.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.