The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Automatic pavement defect detection using 3D laser profiling technology
Abstract
Abstract Asphalt pavement defects e.g. cracks, potholes, rutting, often cause significant safety and economic problems, thus, to automatic detect these defects is vital for pavement maintaining and management. The fact that 3D defect detection methods is superior to traditional 2D methods and manual survey methods in terms of accuracy and comprehensiveness has been widely recognized. Based on 3D laser scanning pavement data, an automatic defect detection method is proposed to detect pavement cracks and pavement deformation defects information simultaneously in this paper. Specifically, a sparse processing algorithm for 3D pavement profiles is first designed to extract crack candidate points and deformations support points, these processing is based on the assumption that the cracks are microscopic local defects while deformations are macroscopic defects in profiles. Then, the crack information can be detected by combining the extracted candidate points and an improved minimum cost spanning tree algorithm. On the other hand, the deformation depth information is acquired based on the profile standard contours which are constructed by profile envelopes and deformation support points, the accurate location and classification information of deformation defects can be obtained by the regional depth property. Experimental tests were conducted using real measured 3D pavement data containing two categories of defects. The experimental results showed that, based on the 3D laser scanning data, the proposed method can effectively detect typical cracks under different road conditions and environments, with the detection accuracy above 98%. Furthermore, different types of deformation defects including potholes, rutting, shoving, subsidence, can also be accurately detected with location error less than 8.7%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Iterative Tensor Voting for Pavement Crack Extraction Using Mobile Laser Scanning Data
Guan, H., Li, J., Yu, Y., Chapman, M., Wang, H., Wang, C., & Zhai, R. (2015) · IEEE Transactions on Geoscience and Remote Sensing · doi:10.1109/tgrs.2014.2344714 · Cited by 112
Cited by
Kheradmandi, N., & Mehranfar, V. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.126162 · Cited by 426
Automated pavement crack detection and segmentation based on two‐step convolutional neural network
Liu, J., Yang, X., Lau, S., Wang, X., Luo, S., Lee, V. C., & Ding, L. (2020) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12622 · Cited by 384
Deep learning-based road damage detection and classification for multiple countries
Arya, D., Maeda, H., Ghosh, S. K., Toshniwal, D., Mraz, A., Kashiyama, T., & Sekimoto, Y. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103935 · Cited by 316
Ji, A., Xue, X., Wang, Y., Luo, X., & Xue, W. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103176 · Cited by 275
Metadata
- Authors
- Zhang, D., Zou, Q., Lin, H., Xu, X., He, L., Gui, R., & Li, Q.
- Venue
- Automation in Construction
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 96
- Pages
- 350-365
- ISSN
- 0926-5805 (ISSN-L)
- OpenAlex
- W2896496331
- Cited by
- 160
- References
- 1
- FWCI
- 8.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.