The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Production and characterization of activated carbon from barley straw by physical activation with carbon dioxide and steam
Open accessAbstract
Abstract In recent years, the growth of environmental protection policies has generated an increase in the global demand for activated carbon, the most widely used adsorbent in many industrial sectors, and with good prospects of implementation in others such as energy storage (electrodes in supercapacitors) and agriculture (fertilizer production). This demand is driving by the search for renewable, abundant and low-cost precursor materials, as an alternative to traditional fossil sources. This study investigates the production of activated carbon from barley straw using physical activation method with two different activating agents, carbon dioxide and steam. Experimental tests under different conditions at each stage of the process, carbonization and activation, have been conducted in order to maximize the BET surface area and microporosity of the final product. During the carbonization stage, temperature and heating rate have been found to be the most relevant factors, while activation temperature and hold time played this role during activation. Optimal conditions for the activation stage were obtained at 800 °C and a hold time of 1 h in the case of activation with carbon dioxide and at 700 °C and a hold time of 1 h in the case of activation with steam. The maximum BET surface area and micropore volume achieved by carbon dioxide activation were of 789 m 2 /g and 0.3268 cm 3 /g while for steam activation were 552 m 2 /g and 0.2304 cm 3 /g, which represent respectively an increase of more than 43% and 42% for the case of activation with carbon dioxide.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Agronomic values of greenwaste biochar as a soil amendment
Chan, K. Y., Van Zwieten, L., Meszaros, I., Downie, A., & Joseph, S. (2007) · Soil Research · doi:10.1071/sr07109 · Cited by 1,902
Rajapaksha, A. U., Chen, S. S., Tsang, D. C. W., Zhang, M., Vithanage, M., Mandal, S., Gao, B., Bolan, N. S., & Ok, Y. S. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.01.043 · Cited by 1,322
Biochar-based nano-composites for the decontamination of wastewater: A review
Tan, X.-F., Liu, Y.-G., Gu, Y.-L., Xu, Y., Zeng, G.-M., Hu, X.-J., Liu, S.-B., Wang, X., Liu, S.-M., & Li, J. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.04.093 · Cited by 900
Ahmed, M. B., Zhou, J. L., Ngo, H. H., Guo, W., & Chen, M. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.05.057 · Cited by 843
Tan, X.-F., Liu, S.-B., Liu, Y.-G., Gu, Y.-L., Zeng, G.-M., Hu, X.-J., Wang, X., Liu, S.-H., & Jiang, L.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.12.083 · Cited by 711
Bouchelta, C., Medjram, M. S., Bertrand, O., & Bellat, J.-P. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.12.009 · Cited by 508
Preparation of activated carbon from forest and agricultural residues through CO2 activation
Zhang, T., Walawender, W. P., Fan, L. T., Fan, M., Daugaard, D., & Brown, R. C. (2004) · Chemical Engineering Journal · doi:10.1016/j.cej.2004.06.011 · Cited by 475
You, S., Ok, Y. S., Chen, S. S., Tsang, D. C. W., Kwon, E. E., Lee, J., & Wang, C.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.177 · Cited by 421
Farma, R., Deraman, M., Awitdrus, A., Talib, I. A., Taer, E., Basri, N. H., Manjunatha, J. G., Ishak, M. M., Dollah, B. N. M., & Hashmi, S. A. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.01.044 · Cited by 413
Cited by
Methods for preparation and activation of activated carbon: a review
Heidarinejad, Z., Dehghani, M. H., Heidari, M., Javedan, G., Ali, I., & Sillanpää, M. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-019-00955-0 · Cited by 1,475
An overview on engineering the surface area and porosity of biochar
Leng, L., Xiong, Q., Yang, L., Li, H., Zhou, Y., Zhang, W., Jiang, S., Li, H., & Huang, H. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144204 · Cited by 1,314
Foong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749
Jjagwe, J., Olupot, P. W., Menya, E., & Kalibbala, H. M. (2021) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2021.03.003 · Cited by 616
Recent advances and challenges in biomass-derived porous carbon nanomaterials for supercapacitors
Li, Z., Guo, D., Liu, Y., Wang, H., & Wang, L. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125418 · Cited by 396
Metadata
- Authors
- Pallarés, J., González-Cencerrado, A., & Arauzo, I.
- Venue
- Biomass and Bioenergy
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 115
- Pages
- 64-73
- ISSN
- 0961-9534 (ISSN-L)
- OpenAlex
- W2799931015
- Cited by
- 618
- References
- 31
- FWCI
- 18.56
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Production and characterization of activated carbon from barley straw by physical activation with carbon dioxide and steam. https://app.cochat.ai/papers/10.1016/j.biombioe.2018.04.015
- The paper
- Pallarés, J., González-Cencerrado, A., & Arauzo, I. (2018). Production and characterization of activated carbon from barley straw by physical activation with carbon dioxide and steam. Biomass and Bioenergy. https://doi.org/10.1016/j.biombioe.2018.04.015
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.