Production and characterization of slow pyrolysis biochar from lignin-rich digested stillage from lignocellulosic ethanol production
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Abstract Lignin-rich digested stillage as a novel feedstock for biochar production was subjected to slow pyrolysis. The lignin residue stemmed from a lignocellulosic ethanol pilot run with poplar, from which the stillage was anaerobically digested prior to pyrolysis. Pyrolysis conditions were optimized to meet guidelines put forth by the International Biochar Initiative and the European Biochar Certificate (molar H/Corg ratio 0.7 and O/Corg ratio 0.4 ), as biochar could be carbon-negative upon soil amendment, while reallocating nutrients to the field. Bench-scale pyrolysis of the lignin residue and straw were conducted according to a 33 factorial design with center runs (ranges: 370–450 °C highest treatment temperature, 5–45 min holding time and 5–50 °C.min−1 heating rate). Parametric and nonparametric statistics revealed that the highest treatment temperature was by far the most influencing factor for both feedstocks which ‘pushed’ H/C and O/C ratios within the desired range. Lignin-based biochar can be obtained with 50.7% yield, a H/C ratio of 0.70 and an O/C ratio of 0.20, already at 384 °C. This is considerably better when compared to straw-based biochar with identical H/C and O/C ratios, which came with a lower yield (33.7%) and required a modestly higher temperature (410 °C). Results from this study emphasize the feasibility to integrate slow pyrolysis in a lignocellulosic biorefinery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bio-char Sequestration in Terrestrial Ecosystems – A Review
Lehmann, J., Gaunt, J., & Rondon, M. (2006) · Mitigation and Adaptation Strategies for Global Change · doi:10.1007/s11027-005-9006-5 · Cited by 3,053
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754
Review of the stability of biochar in soils: predictability of O:C molar ratios
Spokas, K. A. (2010) · Carbon Management · doi:10.4155/cmt.10.32 · Cited by 1,160
Comparison of biochar properties from biomass residues produced by slow pyrolysis at 500°C
Lee, Y., Park, J., Ryu, C., Gang, K. S., Yang, W., Park, Y.-K., Jung, J., & Hyun, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.135 · Cited by 624
Influence of feedstock source and pyrolysis temperature on biochar bulk and surface properties
Suliman, W., Harsh, J. B., Abu-Lail, N. I., Fortuna, A.-M., Dallmeyer, I., & Garcia-Perez, M. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.11.010 · Cited by 585
Wiedner, K., Rumpel, C., Steiner, C., Pozzi, A., Maas, R., & Glaser, B. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2013.08.026 · Cited by 260
Cited by
Sahoo, S. S., Vijay, V. K., Chandra, R., & Kumar, H. (2021) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2021.100101 · Cited by 361
Cheng, F., Luo, H., & Colosi, L. M. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113258 · Cited by 271
Impact of heating rates on the evolution of function groups of the biochar from lignin pyrolysis
Li, C., Hayashi, J.-I., Sun, Y., Zhang, L., Zhang, S., Wang, S., & Hu, X. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105031 · Cited by 143
Deng, C., Lin, R., Kang, X., Wu, B., O’Shea, R., & Murphy, J. D. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109895 · Cited by 123
Ghysels, S., Acosta, N., Estrada, A., Pala, M., De Vrieze, J., Ronsse, F., & Rabaey, K. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00689k · Cited by 56
Self-citation
Metadata
- Authors
- Ghysels, S., Ronsse, F., Dickinson, D., & Prins, W.
- Venue
- Biomass and Bioenergy
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 122
- Pages
- 349-360
- ISSN
- 0961-9534 (ISSN-L)
- OpenAlex
- W2913226672
- Cited by
- 61
- References
- 6
- FWCI
- 3.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.