Cited by 83Algal biology and biofuel productionAquatic Ecosystems and Phytoplankton DynamicsAquaculture Nutrition and Growth

Modeling of biomass production by Spirulina platensis as function of phosphate concentrations and pH regimes

Çelekli, Abuzer, Yavuzatmaca, Mehmet, Bozkurt, Hüseyin·2009·Bioresource Technology

Abstract

Batch cultivations were performed to evaluate the influence of phosphate concentrations (0.25, 0.5, 0.75, and 1.0 g L(-1)) for pH regimes (9.5, 10.0, and 10.5) on the biomass production by Spirulina platensis. The best condition for cell growth (3.099 g L(-1)) was found at 0.5 g L(-1) phosphate and pH value of 10.0. Cultivation time, phosphate, and pH caused to increase significantly (p<0.01) in biomass production by S. platensis. Lag time was observed up to 4 h. After then, biomass production increased sharply (p<0.01) from 0.020 g L(-1) to 2.063, 2.213, 1.532, and 0.797 g L(-1) at 0.25, 0.5, 0.75, and 1.0 g L(-1) phosphate values, respectively. Modified Gompertz model could be regarded as sufficient to describe the biomass production by S. platensis with high determination coefficients and low sum of square value indicated that. Biological parameters for biomass production were successfully predicted by modified Gompertz model.

Integrity signals

Registry

Crossref · 10.1016/j.biortech.2009.02.055

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • The conditions required by A. platensis allow its fast growth while suppressing other algae such as Chlorella.

    “These circumstances allow for the fast growth of these algae while suppressing the development of other algae, such as those belonging to the genus Chlorella [18,25,26,27].”
  • A. platensis requires an aquatic environment with pH 9.5-10.5, high sodium carbonate salts at 10-20 g/L, and a temperature of 35-37 °C during the day.

    “A. platensis requires certain environmental parameters in order to thrive, including an aquatic environment with a pH between 9.5 and 10.5, a high concentration of sodium carbonate salts at a rate of 10–20 g/L, and a temperature that ranges between 35 and 37 °C throughout the day.”

Cites

Flagged first, then by citations

Cited by

Sorted by citations

Authors
Çelekli, A., Yavuzatmaca, M., & Bozkurt, H.
Affiliations
  • Bolu Abant İzzet Baysal University (TR)
  • Gaziantep University (TR)
Venue
Bioresource Technology
Publisher
Elsevier BV
Published
2009-07
Volume
100
Issue
14
Pages
3625-3629
ISSN
0960-8524 (ISSN-L)
OpenAlex
W1980191294
Cited by
83
References
3
Citations by year
2025: 3 · 2024: 7 · 2023: 5 · 2022: 6 · 2021: 3 · 2020: 5 · 2019: 4 · 2018: 4 · 2017: 3 · 2016: 4 · 2015: 4 · 2014: 5 · 2013: 10 · 2012: 8
FWCI
2.79
Type
journal article
Language
en
Open access
closed
Locations
  • Bioresource Technology (publishedVersion)
  • PubMed (publishedVersion)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Algal biology and biofuel production
  • Physical Sciences › Environmental Science › Environmental Chemistry › Aquatic Ecosystems and Phytoplankton Dynamics
  • Life Sciences › Agricultural and Biological Sciences › Aquatic Science › Aquaculture Nutrition and Growth
Keywords
Spirulina platensis, biomass production, phosphate concentration, pH, batch culture, modified Gompertz model, cell growth kinetics, time delay, microalgae cultivation
MeSH terms
Chlorophyll A, Biotechnology, Chlorophyll, Hydrogen-Ion Concentration, Models, Biological, Nitrates, Phosphates, Models, Statistical, Biomass, Spirulina

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review